OSCam-2.25.03-11878-r802 - with libcurl-libdvbcsa-StreamRelay+Icam-upx-PowerVu Auto + PowerVu linuxsat-support.com label.
Patched And Compiled By: Youchie
Notice:
All files are included with the config.
to unlock PowerVu channels, if the keys are not available on the linux-sat forum, simply wait 3 to 10 minutes, depending on your device's hardware. the keys will be decoded via EMM, stored in SoftCam.key, and the channels will unlock.
..................................................................................
Changes:
- show the source name of cacheex peers in the webif ---> v.11872
* possible to show the source name of cacheex peers in the webif. so not only cache3 is shown but also the name of the cacheex reader.
option can be enabled by setting show_cacheex_source_name = 1 in the config or in the webif under global settings.
------------------------------------------------------------------------------------------------------------------------
- Simplify entitlements_bit.html code. ---> v.11873
* Simplify entitlements_bit.html code (introduce more general function that could be reused, get rid of unnecessary function)
------------------------------------------------------------------------------------------------------------------------
- Fix "CacheEX AIO Logging" config section always show on webif although CS_CACHEEX_AIO is not selected ---> v.11874
* Fix "CacheEX AIO Logging" config section always show on webif although CS_CACHEEX_AIO is not selected (part 3 of 3)
* Fix "CacheEX AIO Logging" config section always show on webif although CS_CACHEEX_AIO is not selected (part 2 of 3)
* Fix "CacheEX AIO Logging" config section always show on webif although CS_CACHEEX_AIO is not selected (part 1 of 3)
------------------------------------------------------------------------------------------------------------------------
- Revert "Fix for tiers start date and expire date on 09C7, 098E, and 09EF" ---> v.11875
------------------------------------------------------------------------------------------------------------------------
- Display 1970-01-01 on NDS card that doesn't have start date data on card answer. ---> v.11876
* Previously, OSCam displayed 2032-01-01 or 2031-12-31 (depends on system that oscam is running on) in case of 09C7, 098E,
and 09EF cards as baseyear for these cards are 2020. This could be varied based on card baseyear, for example,
0927 card displayed 2020-01-01 or 2019-12-31 (depends on system that oscam is running on) as baseyear for 0927 card is 2008.
However, all of the mentioned cards above do not have tiers start date data on card response. Hence, those date are practically come from card status 90 20 which is incorrect.
That's why I issue this patch to display it as 1970-01-01 to be consistent with ins76 reading.
N.B. 0x90 means 144 months from January of card baseyear. That's why you see 2032 and 2020 years there.
------------------------------------------------------------------------------------------------------------------------
- Resolve "Full CW block on NDS" ---> v.11877
* Edit oscam-chk.c
* Tryfix warning: overlapping comparisons always evaluate to true [-Wtautological-overlap-compare]
* Edit oscam-chk.c
* Inverts the logic to treat all Videoguard CAIDs as half CW except for two specific excluded ones (0x09C7, 0x09EF)
------------------------------------------------------------------------------------------------------------------------
- Resolve "Reduce CPU usage on using Newcamd" ---> v.11878
* Fix build errors on EuroDes
* There is a performance issue of DES handling in Newcamd code.
1. While rightRot can be unrolled for tiny improvement, the leftRot implementation is a nightmare.
Instead of repeating rightRot 27 times, do it the proper way.
2. Also EuroDes is always called with the same desMode. As TestBit(desMode, F_TRIPLE_DES) always succeeds, drop Eurocrypt S2/M dead code.
------------------------------------------------------------------------------------------------------------------------
Display More
OSCam-2.25.03-11878-r802 --> For All devices that use opkg system .ipk
For all Box that use opkg system.ipk
All VU+ 4K Box Image ║Zero║Uno║Duo║Solo║Ultimo║
All Linux SH4 Box Image
All MIPS Box Image
SH4 Linux
and similar models ..
enigma2-plugin-softcams-oscam_11878-emu-r802_all.ipk
OSCam-2.25.03-11878-r802 --> For all Dreambox with DreamOS images that use dpkg system .deb
enigma2-plugin-softcams-oscam-osdreambox-11878-emu-r802-all.deb
OSCam-2.25.03-11878-r802 --> For Openpli4 + MIPS32el
ipk + bin file manual installation
For all Box that use Openpli4 Image (OE 2.0), mips32el opkg system.ipk
DreamBox ║500HD║800HD║800HDSE║52XHD║8X0HD║70X0HD║
Xtrend ║ET9000║ET9200║ET9500║
and similar models ..
oscam_11878-emu-r802_mips32el-Openpli 04-ipk +bin file manual installation.zip
OSCam-2.25.03-11878-r802 --> For Windows-64bit_Cygwin
oscam-2.25.03-11878-r802@_x86_64-cygwin-libcurl-libdvbcsa-windows-DVB.zip
OSCam-2.25.03-11878-r802 --> For x86_64-linux with SSL
x86_64-linux-SSL-gnu-libcurl-libusb-libdvbcsa.zip
OSCam-2.25.03-11878-r802 --> For x86_64-linux Without SSL
x86_64-linux-gnu-libcurl-libusb-libdvbcsa.zip
OSCam-2.25.03-11878-r802 --> For Android Box API 24 7.0 Nougat (plugin_su)
with libcurl-upx
Android Box API 24 7.0 Nougat.zip
OSCam-2.25.03-11878-r802 --> For Xcruiser 400-420 STAPI HD Series (plugin)
Xcruiser 400-420 HD Series.zip
OSCam-2.25.03-11878-r802 --> For Xcruiser 420 HD AVANT STAPI5 Series (plugin)
Xcruiser 420 HD AVANT Series.zip
linuxsat-support.com/thread/160543/
