Fury-FHD by Islam Salama

Hello,

I installed this skin on “openATV 7.6.” It's a very nice skin and has been running smoothly so far.

Kudos to the designer.

Great job.

After updating to atv7.6 today, my Uno4K SE box keeps crashing with a blue screen and restarting. Deleting Fury-FHD and FuryFHD resolved the issue. Requesting expert help to fix it.

20260126-185507-enigma2-crash.log

Quote from xingchong

After updating to atv7.6 today, my Uno4K SE box keeps crashing with a blue screen and restarting. Deleting Fury-FHD and FuryFHD resolved the issue. Requesting expert help to fix it.

20260126-185507-enigma2-crash.log

What happened to cause a crush?

I will re-flash today's firmware and give you feedback.

Fury-FHD

New update for Fury-FHD V6.5 skin

1️⃣ Fixed the crash that occurred during startup

1- OpenAtv 7.6

2- New Pure2

2️⃣ Added a new feature that displays the movie logo above the poster.

Find it in:

Infobar3.2.logo

Infobar4.1.logo

Infobar5.2.logo

3️⃣ Improved X-Poster and Backdrop renders for fetching events

4️⃣ Added server information in the OpenAtv image

5️⃣ Updated the renderer responsible for EPG subtitling for higher efficiency

6️⃣ Other improvements to skin performance

⚡⚡ After the update, EPG subtitling information will be stored on your hard drive or USB flash drive in a new folder named AIFury. Therefore, you must update the subtitling location within the plugin. ⚡⚡

🚫 The skin has been updated from within the skin itself to an OpenSpa image. This is for members experiencing issues with this image during the update. If the problem persists, please download the skin using the script or the Talent command. 🚫

»»» Supported Images «««

OpenAtv all versions

Egami all versions

OpenSpa all versions

Pure2 all versions

OpenVix all versions

Openbh all versions

Openpli foxbob

OpenPli Py 3.9.9 & 3.11

MediaFire Link

enigma2-plugin-skins-fury-fhd_6.5_all

www.mediafire.com

Script Link Download

Fury-FHD-installer

www.mediafire.com

Talent Command

opkg update && opkg install wget && wget -q "--no-check-certificate" https://raw.githubusercontent.com/islam-2412/IPKS/refs/heads/main/fury/installer.sh -O - | /bin/sh

New update available 🆕 from within the skin plugin

Any comments? Leave them below with a screenshot.

Quote from W@Rp

At first, after the update, 2 EPG Fury appeared.

0.jpg

and one more thing, even though I have disabled translation, it still translates

1.jpg

Display More

I have this too, unfortunately.

for me works disabling v1 and using epg v2

Quote from W@Rp

At first, after the update, 2 EPG Fury appeared.

0.jpg

and one more thing,

I don't want any translation, I prefer the original language of each channel.

and even though I have disabled translation, it still translates

1.jpg

Display More

This is the old plugin icon; you can delete it normally. Regarding the translation issue, when you close it, it reverts to the original language. I've fixed that; just reinstall the script.

Quote from W@Rp

At first, after the update, 2 EPG Fury appeared.

0.jpg

and one more thing,

I don't want any translation, I prefer the original language of each channel.

and even though I have disabled translation, it still translates

1.jpg

Display More

If the translation option is disabled, the device must be restarted.

No Islam Salama, it doesn’t work.

The EPG is forced to be translated into the language set in the "Translation language" option even when translation is disabled.

In the images below, I restarted the box after each time I saved the settings.

1.jpg   2.jpg   3.jpg

4.jpg   5.jpg   6.jpg

I deleted furyAI from extensions over ftp and now working great without translation

Quote from wlad-sat

Quote from Islam Salama

Quote from gaasim

Quote from tataos

Code

<img src="https://www.linuxsat-support.com/cms/attachment/339783-fury2-jpg/?thumbnail=1" class="woltlabAttachment" data-attachment-id="339783" id="wcfImgAttachment5"><img src="https://www.linuxsat-support.com/cms/attachment/339783-fury2-jpg/?thumbnail=1" class="woltlabAttachment" data-attachment-id="339783" id="wcfImgAttachment5"><img src="https://www.linuxsat-support.com/cms/attachment/339782-scriptfury-jpg/?thumbnail=1" class="woltlabAttachment" data-attachment-id="339782" id="wcfImgAttachment2">vu zero 4k , pure2 7.6 image , after the last image update from 19.01. my skin doesn't work or crashes enigma. After that I reinserted a clean image and installed the skin again, when loading the skin, enigma crashes again. I changed a few skins and all the others work properly and load. Can someone check who is using the Pure 2 image.

The same thing is happening to me on my Zgemma H7S.

This will be resolved in the next release.

I could not install the skin version 6.4 on Pure2 7.6. After installing via Putty, before rebooting, a Blue Screen appeared. The skin was added to the folder for selecting skins for installation, but there are no skins in the folder. The skin is not installed via the .ipk file.

Fury6.4.jpgfury.jpgfury1.jpg

pasted-from-clipboard.pngFury2.jpg

Display More

Skin version 6.5 has been successfully installed on Pure2 7.6 (Amiko Viper 4K). Thank you for your work!

для фурі.jpgдля фурі1.jpgдля фурі2.jpgдля фурі3.jpgдля фурі4.jpg

Quote from toni155

I deleted furyAI from extensions over ftp and now working great without translation

fury AI

which directory should I delete it from because I can't find it

Quote from pirobi1

Quote from toni155

I deleted furyAI from extensions over ftp and now working great without translation

fury AI

which directory should I delete it from because I can't find it

Reinstall the skin, then delete the FuryEpg plugin. It no longer works because I updated to a new plugin called EpgFury v2.1.

usr/lib/enigma2/python/plugins/extensions/ furyai or aifury..

But I tried for myself, cause translation was active even if it's turned off. I'm sure It will be solved.

It would be perfect if we could choose translations only for some channels or packages, but great option to have.

Best skin btw 🙌🏻

thank you

it works fine now

Could you change the indicators in the images below so that they display correctly from Green to Red?

The SNR and AGC are correct as Red to Green.

1.jpg   2.jpg   3.jpg

Quote from Islam Salama

Fury-FHD

New update for Fury-FHD V6.5 skin

1️⃣ Fixed the crash that occurred during startup

1- OpenAtv 7.6

2- New Pure2

2️⃣ Added a new feature that displays the movie logo above the poster.

Find it in:

Infobar3.2.logo

Infobar4.1.logo

Infobar5.2.logo

3️⃣ Improved X-Poster and Backdrop renders for fetching events

4️⃣ Added server information in the OpenAtv image

5️⃣ Updated the renderer responsible for EPG subtitling for higher efficiency

6️⃣ Other improvements to skin performance

⚡⚡ After the update, EPG subtitling information will be stored on your hard drive or USB flash drive in a new folder named AIFury. Therefore, you must update the subtitling location within the plugin. ⚡⚡

🚫 The skin has been updated from within the skin itself to an OpenSpa image. This is for members experiencing issues with this image during the update. If the problem persists, please download the skin using the script or the Talent command. 🚫

»»» Supported Images «««

OpenAtv all versions

Egami all versions

OpenSpa all versions

Pure2 all versions

OpenVix all versions

Openbh all versions

Openpli foxbob

OpenPli Py 3.9.9 & 3.11

MediaFire Link

https://www.mediafire.com/file…fury-fhd_6.5_all.ipk/file

Script Link Download

https://www.mediafire.com/file…ury-FHD-installer.sh/file

Talent Command

Code

opkg update && opkg install wget && wget -q "--no-check-certificate" https://raw.githubusercontent.com/islam-2412/IPKS/refs/heads/main/fury/installer.sh -O - | /bin/sh

New update available 🆕 from within the skin plugin

Any comments? Leave them below with a screenshot.

Display More

Subject: Feedback on FURY 6.5 Unable to Download Posters on OpenATV 7.6
Dear Sir,
Thank you very much for your generous sharing. Your FURY skin is truly excellent. Recently, after upgrading the skin to version 6.5, I noticed that movie posters are no longer being downloaded.
My setup details:

• Device: Octagon SF8008
• Firmware: OpenATV 7.6.1

I have performed the following troubleshooting steps and suspect the issue lies with this specific skin version:

1. When I reverted back to FURY version 6.3, posters were downloaded successfully within a few seconds—just as before.
2. I performed a clean installation of the official OpenATV 7.6.0 firmware (without any additional plugins or modifications), installed FURY 6.5, and still encountered the same poster download failure.
3. A friend who owns the same device (Octagon SF8008) reported identical behavior with FURY 6.5.
4. I also tried power-cycling the device, but the problem persists.

I would greatly appreciate your assistance in resolving this issue.
Best regards,

1_0_19_83_6_85_C00000_0_0_0_20260129002133.jpg 1_0_19_283E_3FB_1_C00000_0_0_0_20260129001843.jpg

1_0_19_283E_3FB_1_C00000_0_0_0_20260129001927.jpg