IPTV Dream

There are 246 replies in this Thread which was already clicked 50,500 times. The last Post () by Rauljube21.

    [hr]

    📖 IPTV Dream v3.3 - How to add Playlists & EPG / Instrukcja dodawania danych

    [hr]


    🇬🇧 ENGLISH - How to add data


    METHOD 1: M3U URL (Most popular)

    Use this for long links ending in .m3u or .m3u8 provided by your IPTV provider.

    1. Open the plugin and press key 1 (M3U URL).

    2. A virtual keyboard will appear.

    3. Enter (or paste via OpenWebif) your playlist URL. It must start with

    Code
    http://

    or

    Code
    https://

    .

    4. Press GREEN to confirm.

    5. Watch the status bar in the footer – the plugin will download the list and show the channel count.


    METHOD 2: Local M3U File

    Use this if you have a playlist file saved on a USB stick or receiver's memory (e.g., in /tmp/).

    1. Press key 2 (M3U File).

    2. A file manager will open (defaulting to

    Code
    /tmp/

    ).

    3. Navigation:

    * OK: Enter folder or select file.

    * EXIT: Go up (parent folder).

    4. Find your .m3u or .m3u8 file and press OK.


    METHOD 3: Xtream Codes (Login/Password)

    If your provider gave you: Host, Username, Password.

    1. Press key 3 (Xtream).

    2. You will see a window with three fields.

    3. Use UP / DOWN arrows to switch between fields (the active one has a green border).

    4. Press OK on a field to type data.

    * Host: Full server address (e.g.

    Code
    http://line.iptv-server.com:8080

    ).

    * Username: Your login.

    * Password: Your password.

    5. Once all three are filled, press GREEN to login.


    METHOD 4: MAC Portal (Stalker/Mag)

    For portals authorized via MAC address.

    1. Press key 4 (MAC Portal).

    2. A JSON editor will appear.

    3. Edit the "host" field with your portal URL.

    Example:

    Code
    {
"host": "http://mag.portal.com/c/",
"mac": "00:1A:79:XX:XX:XX"
}

    (MAC is usually auto-detected, but you can edit it manually if spoofing is needed).

    4. Press GREEN (Save) to connect.


    EXTRA: Custom EPG (New in v3.3)

    If your list lacks EPG, and you have your own XMLTV link.

    1. Press key 7 (EPG URL).

    2. Enter the URL to your XML/GZ file (e.g.

    Code
    http://my-epg.com/guide.xml

    ).

    3. Confirm with GREEN.

    4. Then press the YELLOW button in the main menu ("Install EPG sources") to register it.

    5. Now you can download the guide using the system EPG Import plugin.


    ⚠️ IMPORTANT - SAVING (Export):

    Loading a list just shows a preview in memory. To see channels on your TV list:

    1. After loading a list, press BLUE ("Export").

    2. Select channel groups you want (OK or Green button).

    3. Press BLUE again to save them as bouquets.

    4. Restart GUI to make them appear in Favorites.


    [hr]


    🇵🇱 POLSKI - Instrukcja dodawania danych


    METODA 1: Link M3U (Najpopularniejsza)

    Służy do wczytywania linków zakończonych na .m3u lub .m3u8.

    1. Uruchom wtyczkę i naciśnij przycisk 1 (M3U URL).

    2. Otworzy się klawiatura.

    3. Wpisz (lub wklej przez OpenWebif) adres listy. Musi zaczynać się od

    Code
    http://

    lub

    Code
    https://

    .

    4. Naciśnij ZIELONY, aby zatwierdzić.

    5. Obserwuj pasek statusu w stopce – wtyczka pobierze listę i wyświetli liczbę kanałów.


    METODA 2: Plik lokalny M3U

    Jeśli masz plik z listą na pendrive lub w pamięci dekodera (np. /tmp/).

    1. Naciśnij przycisk 2 (M3U plik).

    2. Otworzy się menedżer plików (domyślnie

    Code
    /tmp/

    ).

    3. Nawigacja:

    * OK: Wejdź do katalogu lub wybierz plik.

    * EXIT: Wyjdź w górę.

    4. Znajdź swój plik .m3u lub .m3u8 i naciśnij OK.


    METODA 3: Xtream Codes (Login/Hasło)

    Jeśli masz dane: Host, Użytkownik, Hasło.

    1. Naciśnij przycisk 3 (Xtream).

    2. Zobaczysz okno z trzema polami.

    3. Użyj strzałek GÓRA / DÓŁ, aby zmieniać pola (aktywne ma zieloną ramkę).

    4. Naciśnij OK na wybranym polu, aby wpisać dane.

    * Host: Pełny adres serwera (np.

    Code
    http://line.iptv-server.com:8080

    ).

    * Username: Twój login.

    * Password: Twoje hasło.

    5. Po uzupełnieniu naciśnij ZIELONY, aby się zalogować.


    METODA 4: MAC Portal (Stalker/Mag)

    Dla portali autoryzowanych adresem MAC.

    1. Naciśnij przycisk 4 (MAC Portal).

    2. Wyświetli się edytor JSON.

    3. Edytuj pole "host", wpisując adres portalu.

    Przykład:

    Code
    {
"host": "http://mag.portal.com/c/",
"mac": "00:1A:79:XX:XX:XX"
}

    (MAC jest zazwyczaj wykrywany automatycznie).

    4. Naciśnij ZIELONY (Zapisz).


    DODATEK: Własne EPG (Nowość w v3.3)

    Jeśli masz własny link do pliku XMLTV.

    1. Naciśnij przycisk 7 (EPG URL).

    2. Wpisz adres URL do pliku XML/GZ (np.

    Code
    http://moje-epg.pl/guide.xml

    ).

    3. Zatwierdź ZIELONYM.

    4. Naciśnij ŻÓŁTY w menu głównym ("Instaluj źródła EPG").

    5. Teraz możesz pobrać program używając wtyczki systemowej EPG Import.


    ⚠️ WAŻNE - ZAPISYWANIE (Eksport):

    Wczytanie listy to tylko podgląd. Aby zapisać kanały na liście w TV:

    1. Po wczytaniu naciśnij NIEBIESKI ("Eksport").

    2. Zaznacz grupy kanałów (OK lub Zielony).

    3. Naciśnij ponownie NIEBIESKI, aby zapisać.

    4. Zrestartuj GUI, aby listy się pojawiły.

    restart gui load programm press 4 and then green (no need to type url just press green ) wait and you see a list loading

    select on the left what you want by scrolling down the list and press ok want you want to select

    then press blue and i makes a list for you .

    then restart gui and the list is you faforites channellist

    woutje

    Edited once, last by woutje ().

    It doesn't work


    I did the following:


    I installed IPTV DREAM 3.3

    Then in etc/enigma2 I created a txt directory and renamed it to iptvdream_mac.json

    Then I entered my URL/MAC addresses inside the iptvdream_mac.json My URLs/MAC addresses were configured like this:


    For the example:


    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1A:79:XX:XX:XX"}

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1B:80:XX:XX:XX"}

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1C:81:XX:XX:XX"}

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1D:82:XX:XX:XX"}

    ...


    Next, I restarted the box, opened IPTV Dream, pressed the number 4 key on the remote control, but nothing appears except the virtual keyboard.


    Now I ask:

    After doing all this, when I press the 4 key on the remote control, shouldn't my URL/MAC list appear as it does with Multistalkerpro or Estalker?

    Edited once, last by corpina ().

    Hey, check the entered data format carefully. In my opinion, there should be a space between the URL and the MAC address (after the comma).


    Additionally, the error you are showing (TypeError: 'NoneType' ...) suggests that the plugin cannot correctly identify the Host address. Make sure you have preserved the correct JSON file structure (quotation marks are very important). It should look like this:


    Code
    {
"host": "http://mag.super-b...",
"mac": "00:1A:..."
}


    Pay close attention to whether you accidentally deleted a quotation mark " at the beginning or end of the link.

    I have already written everything there is to write about adding data. You are making mistakes yourselves by not preserving spaces and other characters.


    Just look at my other posts and replies - everything is described there. I cannot keep repeating the solutions to the same errors for everyone. Everything has already been explained; please read my previous answers, as well as those of others regarding the same topic.

    Nothing works, I've tried countless configurations with and without spaces, and none of them work. I've tried all of these methods:


    1:

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1A:79:XX:XX:XX"}

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1B:80:XX:XX:XX"}

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1C:81:XX:XX:XX"}

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1D:82:XX:XX:XX"}


    2:

    {

    "host": "http://delta8k.xyz:8080/c/",

    "mac": "00:1A:79:XX:XX:XX"

    }

    {

    "host": "http://delta8k.xyz:8080/c/",

    "mac": "00:1B:80:XX:XX:XX"

    }

    {

    "host": "http://delta8k.xyz:8080/c/",

    "mac": "00:1C:81:XX:XX:XX"

    }

    {

    "host": "http://delta8k.xyz:8080/c/",

    "mac": "00:1D:82:XX:XX:XX"

    }


    3:

    [

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1A:79:XX:XX:XX"}

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1B:80:XX:XX:XX"}

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1C:81:XX:XX:XX"}

    {"host": "http://delta8k.xyz:8080/c/","mac": "00:1D:82:XX:XX:XX"}

    ]


    4:

    [

    {

    "host": "http://delta8k.xyz:8080/c/",

    "mac": "00:1A:79:XX:XX:XX"

    }

    {

    "host": "http://delta8k.xyz:8080/c/",

    "mac": "00:1B:80:XX:XX:XX"

    }

    {

    "host": "http://delta8k.xyz:8080/c/",

    "mac": "00:1C:81:XX:XX:XX"

    }

    {

    "host": "http://delta8k.xyz:8080/c/",

    "mac": "00:1D:82:XX:XX:XX"

    }

    ]


    As soon as I select the 4 key, only a message appears that says: no host or mac in json

    Quote from jurek2

    Press the green button and wait; at the very bottom it says that it is loading the channels.

    I've done this hundreds of times and it doesn't work.


    I access IPTV DREAM as shown in figure 1

    The options appear, but nothing happens if I press the green key (as shown in photo 2).

    If I press key 4, the virtual keyboard appears.

    If I press the green key again, the message appears. "no host or MAC in json"(as shown in photo 4).


    png: 1.png and 3 other files
    Visit this link to download: 1.png and 3 other files
    files.fm


    But inside the iptvdream_mac.json file located in etc/enigma2, I have these addresses:


    {

    "host": "http://myurl:80/c/",

    "mac": "00:1A:79:a9:2a:b6"

    }


    {

    "host": "http://myurl:80/c/",

    "mac": "00:1A:79:ba:60:4b"

    }


    {

    "host": "http://myurl/c/",

    "mac": "00:1A:79:c5:30:17"

    }


    {

    "host": "http://myurl:80/c/",

    "mac": "00:1A:79:AA:8E:BB"

    }


    {

    "host": "http://myurl:80/c/",

    "mac": "00:1A:79:3d:1f:80"

    }


    And in this case I used the structure provided in post number #23 Which was made available by the member (woutje)


    These URLs/MAC addresses are correct because they work perfectly in Estalker and Multistalkerpro.


    I'm not going to waste any more time on this, I'll delete it and continue using Multistalkerpro and Estalker.

    Edited once, last by corpina ().

    The error you are seeing: [Errno -2] Name or service not known means that your receiver cannot find the server with the address you entered. The DNS system is unable to translate the domain name into an IP address.


    Most likely causes:


    1. Typo in the address (Most probable):

    You entered an address starting with

    Code
    mag.super-b...

    . Check carefully for typos. Is the address complete? Is the ending (e.g., .com, .net) correct? It looks like the hostname is invalid or does not exist.


    2. No Internet / DNS issue:

    Your receiver might not have internet access or has incorrectly configured DNS servers.


    How to fix it?

    • Check if this link works on your computer or phone first.
    • Correct the address in the "host" field in the JSON file, ensuring you type it exactly character by character.

Your resource for Enigma2 IPTV plugins

Discover the best Enigma2 IPTV plugins. Access downloads and dedicated support for integrating live TV streams and video-on-demand services. Find downloads, setup guides, and community support for the latest streaming players and playlist managers.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login