Not able to connect to oscam newcamd from dm800 n line

**dm800pvr** · Jul 11th 2012

Hi there,

conf:

Code

[global]
usrfile                   	= /var/log/oscamuser.log
logfile                   	= /var/log/oscam.log
cwlogdir                  	= /var/log/cw
nice                      	= -1
maxlogsize                	= 10000




[monitor]
hideclient_to             	= 15
appendchaninfo            	= 0







[newcamd]
port = 12500@0603:000000
serverip = 192.168.2.11
key = 0102030405060708091011121314
keepalive = 1




[cccam]
port = 12000
version = 2.1.3
reshare = 2
#reshare_mode = 2
#ignorereshare = 1
#minimizecards = 1
stealth = 1
#updateinterval =
#keepconnected =
#forward_origin_card =
#nodeid =




[webif]
httpport                  	= 8888
httpuser                  	= user
httppwd                   	= pass
httpallowed               	= 127.0.0.1,192.168.2.1-192.168.2.254

Display More

user:

Code

[account]
user                      	= user1
pwd                       	= pass1
group                     	= 1
monlevel                  	= 4
au                        	= 1
caid                      	= 0603
ident                     	= 0603:000000
keepalive                 	=1

log:

Code

2012/07/11 14:38:48 x r jsc_usb0 [mouse] detect i***** card





		2012/07/11 14:38:48 x r jsc_usb0 [mouse] I***** SC 58 version 19 revision 1, patch level 13





		2012/07/11 14:38:48 x r jsc_usb0 [mouse] caid: 0603, acs: 0.05, country code: QAT





		2012/07/11 14:38:48 x r jsc_usb0 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##





		2012/07/11 14:38:51 x r jsc_usb0 [mouse] active providers: 4 (0622f2,00a500,00a500,00a500)





		2012/07/11 14:38:51 x r jsc_usb0 [mouse] found cardsystem i*****





		2012/07/11 14:38:52 x r jsc_usb0 [i*****] entitlements for provider: 1, id: *******




		2012/07/11 14:38:52 x r jsc_usb0 [i*****] chid: ***********




		2012/07/11 14:38:52 x r jsc_usb0 [i*****] chid:************

Display More

cccam.cfg

Code

N: 192.168.2.11 12500 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Please help

Imybash · Jul 12th 2012

Change your port on the n line to 12000 ?

**dm800pvr** · Jul 12th 2012

why u think the problem is port number and 12000 works?

**master G** · Jul 12th 2012

Remove all in red,

Code

[newcamd]
port = 12500@0603:000000
[COLOR=#FF0000]serverip = 192.168.2.11[/COLOR]
key = 0102030405060708091011121314
keepalive = 1




[COLOR=#FF0000][cccam]
port = 12000
version = 2.1.3
reshare = 2
#reshare_mode = 2
#ignorereshare = 1
#minimizecards = 1
stealth = 1
#updateinterval =
#keepconnected =
#forward_origin_card =
#nodeid =[/COLOR]

Display More

And change the nline in CCcam.cfg to

Code

N: 127.0.0.1 12500 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

**dm800pvr** · Jul 12th 2012

Quote from Ten Below

Remove all in red,

Code

[newcamd]
port = 12500@0603:000000
[COLOR=#FF0000]serverip = 192.168.2.11[/COLOR]
key = 0102030405060708091011121314
keepalive = 1




[COLOR=#FF0000][cccam]
port = 12000
version = 2.1.3
reshare = 2
#reshare_mode = 2
#ignorereshare = 1
#minimizecards = 1
stealth = 1
#updateinterval =
#keepconnected =
#forward_origin_card =
#nodeid =[/COLOR]

Display More

And change the nline in CCcam.cfg to

Code

N: 127.0.0.1 12500 user1 pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Dear Ten,

I'm trying to connect my dreambox 800 pvr to my ubuntu oscam service which exist in current LAN with the IP address of 192.168.2.11 so changing it to 127.0.0.1 means I have oscam in my dm800 box which is not and my box can't connect to itself ! the oscam server is ubunto pc linux with 192.168.2.11
Also from another PC in LAN I can telnet to it's port without any problem so the port is not closed in server too

removing red lines also didn't changed anything still my box can't (or won't) connect to oscam PC based server and also there's nothing shows in logs:

Code

03:07 0 s log_list_thread thread started




-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jul 12 03:03:07 2012
-------------------------------------------------------------------------------
03:07 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7167 (i686-linux-gnu)
03:07 0 s version=1.20-unstable_svn, build #7167, system=i686-linux-gnu, nice=-1
03:07 0 s client max. idle=120 sec, debug level=65535, filter_sensitive=1
03:07 0 s max. logsize=10000 Kb, loghistorysize=4096 bytes
03:07 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
03:07 0 s share updater thread started
03:07 0 share-updater mode=initfast t=1s i=30
03:07 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
03:07 0 s reader 'jsc_triple02' provid filter(s):
03:07 0 s CAID #0: 0603
03:07 0 s provid #0: 000000
03:07 0 s reader 'jsc_usb0' provid filter(s):
03:07 0 s CAID #0: 0603
03:07 0 s provid #0: 000000
03:07 0 s user 'user1' provid filter(s):
03:07 0 s CAID #0: 0603
03:07 0 s provid #0: 000000
03:07 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
03:07 0 s signal handling initialized (type=sysv)
03:07 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
03:07 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
03:07 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
03:07 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
03:07 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
03:07 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
03:07 0 s Starting listener 0
03:07 0 s monitor: disabled
03:07 0 s Starting listener 0
03:07 0 s camd35: disabled
03:07 0 s Starting listener 0
03:07 0 s cs378x: disabled
03:07 0 s Starting listener 0
03:07 0 s newcamd: Bind request failed, waiting another 119 seconds
03:08 0 share-update [1] 0 0
03:08 0 reported/updated +0/-0/dup 0 of 0 cards to sharelist
03:08 0 share-updater mode=initfast t=1s i=30
03:08 0 s newcamd: Bind request failed, waiting another 118 seconds
03:09 0 share-updater mode=initfast t=1s i=29
03:09 0 s newcamd: Bind request failed, waiting another 117 seconds
03:10 0 share-updater mode=initfast t=1s i=28
03:10 0 s newcamd: Bind request failed, waiting another 116 seconds
03:18 0 s thread B77336C0 exit with signal 2
03:18 0 s cardserver down
03:18 0 share-updater mode=initfast t=1s i=20
05:06 0 s log_list_thread thread started

Display More

Another log:

Code

>> OSCam << cardserver started at Thu Jul 12 03:05:06 2012
-------------------------------------------------------------------------------
05:06 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7167 (i686-linux-gnu)
05:06 0 s version=1.20-unstable_svn, build #7167, system=i686-linux-gnu, nice=-1
05:06 0 s client max. idle=120 sec, debug level=65535, filter_sensitive=1
05:06 0 s max. logsize=10000 Kb, loghistorysize=4096 bytes
05:06 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
05:06 0 s share updater thread started
05:06 0 share-updater mode=initfast t=1s i=30
05:06 0 s CAID #0: 0603
05:06 0 s provid #0: 000000
05:06 0 s user 'user1' provid filter(s):
05:06 0 s CAID #0: 0603
05:06 0 s provid #0: 000000
05:06 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
05:06 0 s signal handling initialized (type=sysv)
05:06 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
05:06 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
05:06 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
05:06 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
05:06 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
05:06 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
05:06 0 s Starting listener 0
05:06 0 s monitor: disabled
05:06 0 s Starting listener 0
05:06 0 s camd35: disabled
05:06 0 s Starting listener 0
05:06 0 s cs378x: disabled
05:06 0 s Starting listener 0
05:06 0 s newcamd: initialized (fd=6, port=12500, crypted)
05:06 0 s -> CAID: 0603 PROVID: 000000
05:06 0 s Starting listener 0
05:06 0 s cccam: initialized (fd=7, port=12000, crypted)
05:06 0 s Starting listener 0
05:06 0 s pandora: disabled
05:06 0 s Starting listener 0
05:06 0 s csp: disabled
05:06 0 s Starting listener 0
05:06 0 s radegast: disabled
05:06 0 s starting thread http
05:06 0 s http thread started
05:06 0 s starting thread reader check
05:06 0 s reader check thread started
05:06 0 s starting thread check
05:06 0 s check thread started
05:06 8253338 h HTTP Server listening on port 8888
05:06 0 s cardreader: Initializing
05:06 0 s jsc_usb0 [mouse] creating thread for device /dev/ttyUSB0
05:06 0 s start reader thread action 8
05:06 825A8C0 r jsc_triple02 [smargo] smargo init
05:06 825C100 r data from add_job action=8 client r jsc_usb0
05:06 0 s loadbalancer: can't read from file /tmp/.oscam/stat
05:06 0 s waiting for local card init
05:06 825C100 r jsc_usb0 [mouse] IFD: Opening device /dev/ttyUSB0
05:06
 825C100 r jsc_usb0 [mouse] IO: custom baudrate: cardmhz=600 mhz=500 
custom_baud=1000 baud_base=24000000 divisor=24000 -> effective 
baudrate 1000
05:06 825C100 r jsc_usb0 [mouse] IO: Setting properties
05:06 825C100 r jsc_usb0 [mouse] IO: Setting DTR=1
05:06 825C100 r jsc_usb0 [mouse] IO: Setting RTS=0
05:06 825C100 r jsc_usb0 [mouse] IO: Receiving:
05:06 825C100 3B
05:06 825C100 r jsc_usb0 [mouse] IO: Receiving:
05:06 825C100 3B
05:06 825C100 35
05:06 825C100 r jsc_usb0 [mouse] IO: Receiving:
05:06 825C100 2E
05:06 825C100 r jsc_usb0 [mouse] IO: Receiving:
05:06 825C100 38
05:06 825C100 r jsc_usb0 [mouse] IO: Receiving:
05:06 825C100 95
05:06 825C100 r jsc_usb0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=200 ms
05:07 0 share-update [1] 265657229 0
05:07 0 s-card added: id 0 remoteid 10000 caid 603 hop 0 reshare 2 originid 0 cardtype 1
05:07 0 s-card added: id 0 remoteid 20000 caid 603 hop 0 reshare 2 originid 0 cardtype 1
05:07 0 reported/updated +2/-0/dup 0 of 2 cards to sharelist
05:07 0 share-updater mode=initfast t=1s i=30
05:07 825C100 r jsc_usb0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=1000 ms
05:07 825C100 r jsc_usb0 [mouse] IFD: Initializing reader type=5
05:07
 825C100 r jsc_usb0 [mouse] IO: custom baudrate: cardmhz=600 mhz=500 
custom_baud=8000 baud_base=24000000 divisor=3000 -> effective 
baudrate 8000
05:07 825C100 r jsc_usb0 [mouse] IO: Setting properties
05:07 825C100 r jsc_usb0 [mouse] IO: Setting DTR=1
05:07 825C100 r jsc_usb0 [mouse] IO: Setting RTS=0
05:08 0 share-updater mode=initfast t=1s i=29
05:08 825C100 r jsc_usb0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=1000 ms
05:08 825C100 r jsc_usb0 [mouse] IFD: Device /dev/ttyUSB0 succesfully opened
05:08 825C100 r jsc_usb0 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=500, cardmhz=600)
05:08 825C100 r ending thread
05:09 0 share-updater mode=initfast t=1s i=28
05:09 0 start reader thread action 11
05:09 825C100 r data from add_job action=11 client r jsc_usb0
05:09 825C100 r jsc_usb0 [mouse] card detected
05:09 825C100 r add reader job action 4
05:09 825C100 r jsc_usb0 [mouse] IFD: Activating card
05:09 825C100 r jsc_usb0 [mouse] IFD: Resetting card
05:09 825C100 r jsc_usb0 [mouse] IFD: Phoenix setting baudrate to 9600
05:09
 825C100 r jsc_usb0 [mouse] IO: custom baudrate: cardmhz=600 mhz=500 
custom_baud=8000 baud_base=24000000 divisor=3000 -> effective 
baudrate 8000
05:09 825C100 r jsc_usb0 [mouse] IO: Setting properties
05:10 0 share-update [1] ******3262 265657229
05:10 0 reported/updated +0/-0/dup 0 of 2 cards to sharelist
05:10 0 share-updater mode=initfast t=1s i=30
05:10 8253338 h WebIf: Origin checked. Result: access from 192.168.2.3 => allowed
05:10 8253338 h WebIf: Received stale header from 192.168.2.3.
05:10 8253338 h WebIf: Origin checked. Result: access from 192.168.2.3 => allowed
05:10 8253338 h WebIf: Origin checked. Result: access from 192.168.2.3 => allowed
05:11 8253338 h WebIf: Origin checked. Result: access from 192.168.2.3 => allowed
05:11 8253338 h WebIf: Origin checked. Result: access from 192.168.2.3 => allowed
05:11 8253338 h WebIf: Origin checked. Result: access from 192.168.2.3 => allowed
05:11 8253338 h WebIf: Origin checked. Result: access from 192.168.2.3 => allowed
05:11 8253338 h WebIf: Origin checked. Result: access from 192.168.2.3 => allowed
05:11 825C100 r jsc_usb0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=1000 ms
05:11 825C100 r jsc_usb0 [mouse] IFD: Setting parity from Even to Even
05:11 0 share-updater mode=initfast t=1s i=29
05:11 825C100 r jsc_usb0 [mouse] IO: Setting RTS=1
05:12 825C100 r jsc_usb0 [mouse] IO: Setting RTS=0
05:12 825C100 r jsc_usb0 [mouse] IO: Receiving:
05:12 825C100 3B
05:12 825C100 r jsc_usb0 [mouse] IO: Receiving:
05:12 825C100 9F
05:12 825C100 95
05:12 0 share-updater mode=initfast t=1s i=28
05:13 825C100 r jsc_usb0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=1000 ms
05:13 0 share-updater mode=initfast t=1s i=27
05:14 825C100 r jsc_usb0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=1000 ms
05:14 825C100 r jsc_usb0 [mouse] ATR:***********************4 4F 20****************5 2E 38 95
05:14 825C100 r jsc_usb0 [mouse] TA1=21 TD1=0E (T14)
05:14 825C100 r jsc_usb0 [mouse] 1 protocol types detected. Historical bytes: **************************6 35 2************
05:14 825C100 r jsc_usb0 [mouse] No PTS needed, selected protocol T14, F=558, D=1.000000, N=0
05:14 825C100 r jsc_usb0 [mouse] IFD: Protocol: T=14, WWT=4800, Clockrate=6000000
05:14 825C100 r jsc_usb0 [mouse] Setting timings: timeout=598 ms, block_delay=0 ms, char_delay=0 ms
05:14 825C100 r jsc_usb0 [mouse] Setting right parity
05:14 825C100 r jsc_usb0 [mouse] IFD: Setting parity from Even to None
05:14 825C100 r jsc_usb0 [mouse] IO: Setting properties
05:14 0 share-updater mode=initfast t=1s i=26
05:15 825C100 r jsc_usb0 [mouse] IO: Timeout in IO_Serial_WaitToRead, timeout=1000 ms
05:15 825C100 r jsc_usb0 [mouse] Done!
05:15 825C100 r jsc_usb0 [mouse] Maximum frequency for this card is formally 6 Mhz, clocking it to 5.00 Mhz
05:15 825C100 r jsc_usb0 [mouse] IFD: Card succesfully activated
05:15 0 share-updater mode=initfast t=1s i=25
05:16 825C100 r jsc_usb0 [mouse] detect i***** card
05:16 825C100 r jsc_usb0 [mouse] write to cardreader
05:16 825C100 02 1E 00 00 00
05:16 825C100 r jsc_usb0 [mouse] IFD: Transmit:
05:16 825C100 01
05:16 825C100 r jsc_usb0 [mouse] IO: Sending:
05:16 825C100 01
05:16 825C100 r jsc_usb0 [mouse] IFD: Transmit succesful
05:16 825C100 r jsc_usb0 [mouse] IFD: Transmit:
05:16 825C100 02 1E 00 00 00

Display More

**steve67474** · Jul 12th 2012

have you tried a cline using ccam? rem out the newcamd entries and configure the cccam using 12500 and set a cline up in dm800 config to see if that works. all cline needs in dm800 cfg is IP port user1 pass1 just to see if it pops up. At leasrt it will let you know it they are talking

**dm800pvr** · Jul 12th 2012

Quote from steve67474

have you tried a cline using ccam? rem out the newcamd entries and configure the cccam using 12500 and set a cline up in dm800 config to see if that works. all cline needs in dm800 cfg is IP port user1 pass1 just to see if it pops up. At leasrt it will let you know it they are talking

Done!
With no success
How may I check if they talking (I mean DM with Oscam)
Where to check logs on my box?
Nothing in oscam full debug mode logs

**dm800pvr** · Jul 12th 2012

Seems cccam not intrested start at all even after restart this is the dreambox logs:
as you can see log indicate CCcam: server started on port 12000 and then EMM: not interested in ...

Code

Jul 13 02:25:30 dm800 daemon.debug CCcam: ======================================================================
Jul 13 02:25:30 dm800 daemon.debug CCcam: starting CCcam 2.1.3 compiled on Nov 14 2009@00:37:55
Jul 13 02:25:30 dm800 daemon.debug CCcam: ======================================================================
Jul 13 02:25:31 dm800 daemon.debug CCcam: online using nodeId ce27626d9c98d2f1
Jul 13 02:25:31 dm800 daemon.debug CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
Jul 13 02:25:31 dm800 daemon.debug CCcam: static cw not found or bad
Jul 13 02:25:34 dm800 user.warn kernel: [ 1284.105000] alps_bsbe2 is in normal mode now
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.717000] start pcr0 on dmx 3 pid:8ad index 5
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.719000] start audio on dmx 3 pid:8c0
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.719000] audio xpt start
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.719000] sync is off so we enable it
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.719000] demux-index 3 pcr0pid 8ad
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.719000] using 5 as pcr0 pidchannel
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.720000] MPEG
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.721000] audio: decoder start 0
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.735000] video delay 0 (0 ms)
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.735000] total video delay: 0 (0 ms)
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.738000] start video0 on dmx 3 pid:8ad
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.738000] total video delay: 0 (0 ms)
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.747000] VIDEO0: start decode
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.780000] ch0: lock
Jul 13 02:25:37 dm800 user.warn kernel: [ 1287.780000] RAP first pts 0x18828742c, stc 0x188282a48, pcr valid
Jul 13 02:25:38 dm800 user.warn kernel: [ 1288.047000] RAP sampling rate info isr
Jul 13 02:25:38 dm800 user.warn kernel: [ 1288.047000] eBitRateChange Isr.. set source_changed_event!
Jul 13 02:25:38 dm800 user.warn kernel: [ 1288.047000] eModeChange Isr.. set source_changed_event!
Jul 13 02:25:38 dm800 user.warn kernel: [ 1288.367000] VIDEO0: first pts 0x18829545c
Jul 13 02:25:38 dm800 user.warn kernel: [ 1288.518000] enable tsm0
Jul 13 02:25:44 dm800 daemon.debug CCcam: server started on port 12000
Jul 13 02:25:49 dm800 daemon.debug CCcam: EMM: not interested in 0B00:000000
Jul 13 02:25:49 dm800 daemon.debug CCcam: EMM: not interested in 0D01:000000
Jul 13 02:25:49 dm800 daemon.debug CCcam: EMM: not interested in 0D03:000000
Jul 13 02:25:49 dm800 daemon.debug CCcam: EMM: not interested in 0500:042630

Display More

**dm800pvr** · Jul 13th 2012

Still waiting for your answer guys

**dm800pvr** · Jul 13th 2012

problem solved!!!!!!
I had 2 reader in config
1 was attached but the other not!
so user always try to use deattached reader and access not granted!
I disabled in active reader and all works fine now!!

**dm800pvr** · Jul 13th 2012

Now client connects but why oscam can't recognize the channel service iD!?
Last Channel =0603:20FB unknown
This is the pic:
I've set ident 0603:000000 in reader

this is reader config:

Code

[reader]
label                         = jsc_usb0
protocol                      = mouse
device                        = /dev/ttyUSB0
caid                          = 0603
force_i*****                  = 1
boxkey                        = 1122334455667788
ecmwhitelist                  = 0603:34
detect                        = cd
mhz                           = 500
cardmhz                       = 600
ident                         = 0603:000000
group                         = 1
emmcache                      = 1,3,2

Display More

**dm800pvr** · Jul 13th 2012

The problem was I set the whitelist length to 34 only
correct lengthes is 34 in http://streamboard.gmc.to:8001/wiki/ECMLengthList
But!
when I remove the ECM whitelist from reader section I get OK else I get
Ignore ECM
JSC Sport 0603 whitelist 34 not works
what should I do for i r d e to JSC card guys?

Not able to connect to oscam newcamd from dm800 n line

Participate now!

Share

Tags