sall. I have a problem with vu+uno4kse. I tried to connect the 10 lnb through 2 diseqc with 2 antenna cables to the 2 tuners of the device. When restarting, one satellite does not work, sometimes another. Sometimes from one diseq when from another. I also tried with 2 diseqc and a switch, the result is the same. If you can give me a solution to this problem. Thank you.
connect the 10 lnb through 2 diseqc with 2 antenna cables to the 2 tuners of vu+uno4kse
-
- Vu+ PurE2
- Tuner Support
- celbun
- Thread is marked as Resolved.
-
master G
Added the Label Tuner Support -
master G
Changed the title of the thread from “diseqc” to “connect the 10 lnb through 2 diseqc with 2 antenna cables to the 2 tuners of vu+uno4kse”. -
Most satellites can only support 4 LNBS or less. So you'll need three satellite dishes for 10 lnbs.
-
Please draw a diagram of the wiring. Post screenshots of every tuner configuration or you can also issue this command using Terminal/Putty
cat /etc/enigma2/settings | grep config.Nims > /tmp/mytunerconfig.txt
Also, can you clarify what you mean by "two tuners"? Do you mean
A. "2 tuners on 1 tuner card, i,e your receiver has 8 tuners"
B. " 2 tuner cards. i,e your receiver has 16 tuners"
Which image are you using. Please also say version number/date?
-
Can you please upload the output/results of the command I posted. Sorry, I should have said, there will be a file called "mytunerconfig.txt" in your /tmp directory.
Your title says 10lnbs, but I count five on your diagram. Remember that the LNB numbers are per tuner.
The fact that you have an FBC tuner does not make any difference to how you configure it. There is a thread titled "Illustrated Guide to setting up disqec 1.1(T90 dish with multi LNB Vix image)" on another forum to show you the configuration.
VU+ UNO 4K SE PVR ready Linux Enigma2 Receiver UHD 2160p
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
