ubuntu and 2 smargos

There are 5 replies in this Thread which was already clicked 1,086 times. The last Post () by master G.

  • hi my friends , please help me !!
    i have installed on my PC ubuntu 12.04 server , oscam and two smargo card readers !!
    i have problem with readers , both wors , but separatley only !!
    if i insert both to USB ports , work one only and second is stopped (error card), readers dont work together !!
    my oscam.server


    [reader]
    label = ice
    protocol = smartreader
    device = 003:002 (lsusb)
    caid = 0D96
    detect = cd
    mhz = 600
    cardmhz = 357
    group = 1
    emmcache = 1,3,2
    deprecated = 1


    [reader]
    label = ***link
    protocol = smartdeader
    device = 003:003
    caid = 0D03
    detect = cd
    mhz = 600
    cardmhz = 357
    group = 2
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    deprecated = 1
    audisabled = 1


    excuse my english
    thx for your help

    • Official Post

    The only thing that is obvious in your configs is the protocol is spelt incorrect [smartdeader] where it should be smartreader.




    If this doesn`t help then we will need to see the errors from oscam log or webinfo to find a solution.

  • The only thing that is obvious in your configs is the protocol is spelt incorrect [smartdeader] where it should be smartreader.




    If this doesn`t help then we will need to see the errors from oscam log or webinfo to find a solution.


    thx for reply , dont work it
    here is my log
    2012/07/19 15:17:59 8AE4230 r ice [smartreader] card detected
    2012/07/19 15:18:01 8AE4230 r ice [smartreader] ATR: 3B 00
    2012/07/19 15:18:01 8AE4230 r ice [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
    2012/07/19 15:18:02 8AE4230 r ice [smartreader] card system not supported
    2012/07/19 15:18:02 8AE4230 r ice [smartreader] card initializing error


    now work ***link , but dont work ice , if i change cards i see same log but with name ***link , cards dont work togheter


    Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
    iProduct
    iSerial 0
    Bus 003 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
    iProduct 0
    iSerial 0

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management