ubuntu and 2 smargos

There are 5 replies in this Thread which was already clicked 1,032 times. The last Post () by master G.

  • hi my friends , please help me !!
    i have installed on my PC ubuntu 12.04 server , oscam and two smargo card readers !!
    i have problem with readers , both wors , but separatley only !!
    if i insert both to USB ports , work one only and second is stopped (error card), readers dont work together !!
    my oscam.server


    [reader]
    label = ice
    protocol = smartreader
    device = 003:002 (lsusb)
    caid = 0D96
    detect = cd
    mhz = 600
    cardmhz = 357
    group = 1
    emmcache = 1,3,2
    deprecated = 1


    [reader]
    label = ***link
    protocol = smartdeader
    device = 003:003
    caid = 0D03
    detect = cd
    mhz = 600
    cardmhz = 357
    group = 2
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    deprecated = 1
    audisabled = 1


    excuse my english
    thx for your help

    • Official Post

    The only thing that is obvious in your configs is the protocol is spelt incorrect [smartdeader] where it should be smartreader.




    If this doesn`t help then we will need to see the errors from oscam log or webinfo to find a solution.

  • The only thing that is obvious in your configs is the protocol is spelt incorrect [smartdeader] where it should be smartreader.




    If this doesn`t help then we will need to see the errors from oscam log or webinfo to find a solution.


    thx for reply , dont work it
    here is my log
    2012/07/19 15:17:59 8AE4230 r ice [smartreader] card detected
    2012/07/19 15:18:01 8AE4230 r ice [smartreader] ATR: 3B 00
    2012/07/19 15:18:01 8AE4230 r ice [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
    2012/07/19 15:18:02 8AE4230 r ice [smartreader] card system not supported
    2012/07/19 15:18:02 8AE4230 r ice [smartreader] card initializing error


    now work ***link , but dont work ice , if i change cards i see same log but with name ***link , cards dont work togheter


    Bus 003 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
    iProduct
    iSerial 0
    Bus 003 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
    iProduct 0
    iSerial 0

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!