Oscam.server config

**cappilio** · Sep 14th 2012

Hi,

Firstly I have searched the forum so please don't flame me. im not sure exactly how to word what i am looking for in search so its probably already posted somewhere but i cannot find it.

I am new to all this for the last few weeks, i successfully got a dreambox working how i want and all is grand. However i came into possession of a QBox Mini a few days ago.
I believe i have done everything right so far.

i am using Roy-Image-BKP-QBOXHDMINI on it.
I ran a scan for satellites which took around 20 hours, but now i have a massive list of channels, GREAT.

I have an nline i use with my dreambox

"N: 12345678z.com 7115 peter238-1223 1234567 12 34 45 56 78 89 90 12 23 34 45 45 12 17"

But now if what i understand with correct i must present this in a different format for oscam? in "oscam.server"

# remote CCcam reader

#[reader]
#label = remote4
#protocol = cccam
#device = 192.168.0.5,45678
#account = login4,password4
#group = 4
#caid = 0400
#cccversion = 1.2.34
#cccbuild = 5678

My question is (and again im sorry you may have already answered this a million times but i was unable to search precisely enough)

exactly how do i take that information and insert it into oscam.server?
and is that the only config i need to change?

Any help would be greatly appreciated, also please note this has nothing to do with illegal card sharing the card being shared is perfectly legal.

Regards
Jamie Harrison

**master G** · Sep 14th 2012

You can use this tool HERE - CCcam to Oscam Converter.

N: myserver.homelinux.com 12000 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

[reader]
label = my n line
enable = 1
protocol = newcamd
device = myserver.homelinux.com,12000
account = username
password = password
cccversion = 2.0.11
cccmaxhops = 3 # dont use higher than 3 !!!
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
keepalive = 1

**cappilio** · Sep 14th 2012

Thanks very much for a quick reply.
that explains it perfectly. i had seen that tool i just wasn't sure if that's exactly what i needed, sorry again.

**cappilio** · Sep 15th 2012

Hi guys sorry im back again, That tool worked a treat and even saves it as oscam.server for you. So i replaced its output with the oscam.server currently on the qbox, but im still having problems viewing any of my cardshare services? am i required to edit anything else?

**rikjaard-real** · Sep 15th 2012

Re- post your configs mate ! Mainly oscam server So it can be checked again !

You did reboot after editing ?

**cappilio** · Sep 16th 2012

thanks for the reply,

my configs currently in use are below;

Oscam.user

Code

#
# user configuration using oscam as SERVER for remote client
# (if you use oscam as simple CLIENT connecting remote server, see oscam.server)
#




# simplest account




#[account]
#User  = john
#pwd   = PASSword
#group = 1




# ============================================================
# DON'T CHANGE THIS USER: it manage EMM forward to readers
# You can enable/disable EMM forward to cards setting "AU"
#  see docs/oscam.user
[account]
user  = dvbapi_qboxhd
group = 1
au    = 1
# ============================================================




# --- user examples ---




# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled




#[account]
#user       = user1
#pwd        = password1
#monlevel   = 0
#uniq       = 1
#group      = 1
#au         = reader1
#services   = services1
#betatunnel = 0300.FFFF:0100,0400.FFFF:0100
#ident 	   = 0100:000000
#caid       = 0100




# user for group 2 with monitor access, AU enabled




#[account]
#user       = user2
#pwd        = password2
#monlevel   = 1
#uniq       = 0
#group      = 2
#au         = reader2
#services   = services2
#ident 	   = 0200:000000
#caid       = 0200




# user for group 2 without monitor access, AU disabled, account disabled




#[account]
#user       = user3
#pwd        = password3
#disabled   = 1
#group      = 2
#services   = services2
#ident 	   = 0200:000000
#caid       = 0200




# user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents




#[account]
#user       = user4
#pwd        = password4
#monlevel   = 0
#uniq       = 1
#group      = 3
#ident 	   = 0300:000000,FFFFFF;0400:FFFFFF
#caid       = 0300

Display More

Oscam.services

Code

#
# definition of services 
#
# format:
# [name]
# caid=CAID[,CAID]...
# provid = provider ID[,provider ID]...
# srvid = service ID[,service ID]...




[services1]
caid=0100
provid=000001,ABCDEF
srvid=0001,0002,000A,000B




[services2]
caid=0200
srvid=0003,0004,000C,000D

Display More

Oscam.Server

Code

[reader]
label=123456.com
enable=1
protocol=newcamd
key=1212121212121212121212121212
device=123456.com,6004
user=peter222-2222
password=2222222
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

Display More

Oscam.conf

Code

#
# main configuration
#




[global]




#-------------
# general




nice	         = -1
waitforcards     = 0
preferlocalcards = 1







# if you DON'T WANT QboxHD leds use 
# disableqboxhdled = 1
disableqboxhdled = 0







#-------------
# logging




disablelog    = 0
maxlogsize    = 1000
logfile	      = /var/oscam/log/oscam.log




disableuserfile = 1
usrfile	      = /var/oscam/log/user.log




#-------------
# monitor




[monitor]
port          = 0
#port	      = 988
aulow	      = 120
monlevel      = 1




#-------------
# web interface




[webif]
httpport      = 8888
httpuser      = user
httppwd       = pass
httprefresh   = 10
httptpl       = /var/oscam/webif-template
httpcss       = /var/oscam/webif-template/site.css
httpjsicons   = 0
# access is allowed only from these IP
httpallowed   = 127.0.0.1,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255,10.0.0.0-10.255.255.255
# access allowed from this dynamic client 
#httpdyndns   = myhostname.dyndns.com




#-------------
# DVB API




[dvbapi]
enabled	      = 1
boxtype       = qboxhd
user	      = dvbapi_qboxhd
au            = 1
# for "priority" and "ignore" edit conf/oscam.dvbapi










#-------------
# protocols 
# these are used for oscam used as a SERVER
# if oscam is used as a CLIENT connecting remote server see oscam.server file




# --- protocols examples ---




#[cccam]                                                                                               
#port          = 12000                                                                                 
#version       = 2.0.11                                                                                
#build         = 1234                                                                                  
#reshare       = 2




#[camd35]
#port          = 30000
#suppresscmd08 = 1




#[newcamd]
#key           = 000102030405060708090A0B0C0D
#port          = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF




#[radegast]
#port          = 20000
#user          = user1
#allowed       = 192.168.0.0-192.168.255.255




#[cs378x]
#port          = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF




#[gbox]
#password      = password1
#maxdist       = 4
#cardinfos     = card.infos
#ignorelist    = ignore.list
#onlineinfos   = online.infos
#locals        = 01000000,02000000,0300FFFF




#[serial]
#device        = user2@/dev/ttyS0?delay=1&timeout=300

Display More

as far as i am aware i only have to worry about the oscam.server file.
yes i did reboot after change

CapNCooK · Sep 16th 2012

To make your question a little more clear, this is your current config, without all the hashed-out lines:

[oscam.conf]

Code

[global]




nice             = -1
waitforcards     = 0
preferlocalcards = 1
disablelog    = 0
maxlogsize    = 1000
logfile          = /var/oscam/log/oscam.log
disableuserfile = 1
usrfile          = /var/oscam/log/user.log







[monitor]
port          = 0
aulow          = 120
monlevel      = 1




[webif]
httpport      = 8888
httpuser      = user
httppwd       = pass
httprefresh   = 10
httptpl       = /var/oscam/webif-template
httpcss       = /var/oscam/webif-template/site.css
httpjsicons   = 0
httpallowed   = 127.0.0.1,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255,10.0.0.0-10.255.255.255




[dvbapi]
enabled          = 1
boxtype       = qboxhd
user          = dvbapi_qboxhd
au            = 1

Display More

[oscam.server]

Code

[reader]
label=123456.com
enable=1
protocol=newcamd
key=1212121212121212121212121212
device=123456.com,6004
user=peter222-2222
password=2222222
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

Display More

[oscam.user]

Code

[account]
user  = dvbapi_qboxhd
group = 1
au    = 1

--

Now, back to your question, how to convert this line into an Oscam reader:
"N: 12345678z.com 7115 peter238-1223 1234567 12 34 45 56 78 89 90 12 23 34 45 45 12 17"

Here it is:

[reader]
label = newcamd_reader1
protocol = newcamd
device = 12345678z.com,7115
key = 1234455678899012233445451217
user = peter238-1223
password = 1234567
caid = 1234 ###### PUT CAID FROM REMOTE CARD HERE
ident = 1234:000000 ##### PUT CAID:IDENT FROM REMOTE CARD HERE
group = 1
emmcache = 1,3,2

..

Please make clear posts.. Much easier to anwer! :)

**cappilio** · Sep 16th 2012

caid = 1234 ###### PUT CAID FROM REMOTE CARD HERE
ident = 1234:000000 ##### PUT CAID:IDENT FROM REMOTE CARD HERE

im not sure what these are all i was provided with nline was
device key user and password

**ishara** · Sep 25th 2016

Quote from master G

You can use this tool HERE - CCcam to Oscam Converter.

N: myserver.homelinux.com 12000 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

[reader]
label = my n line
enable = 1
protocol = newcamd
device = myserver.homelinux.com,12000
account = username
password = password
cccversion = 2.0.11
cccmaxhops = 3 # dont use higher than 3 !!!
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
keepalive = 1

Display More

should there be space between = as shown above?as when i use cccam to scam converter there is no space like this

[reader]
label=my n line
enable=1
protocol=newcamd
device=myserver.homelinux.com,12000
account=username
password=COLOR="#FFFF00"]password[/COLOR]
cccversion=2.0.11
cccmaxhops = 3 # dont use higher than 3 !!!
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
keepalive = 1[/QUOTE]

**master G** · Sep 25th 2016

Quote from ishara

should there be space between = as shown above?as when i use cccam to scam converter there is no space like this

[reader]
label=my n line
enable=1
protocol=newcamd
device=myserver.homelinux.com,12000
account=username
password=COLOR="#FFFF00"]password[/COLOR]
cccversion=2.0.11
cccmaxhops = 3 # dont use higher than 3 !!!
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
keepalive = 1

Display More

No, the space is not required.

**ishara** · Sep 25th 2016

isit possible to use oscam or doscam with just softcam,if yes how please.i tried toset up with files you posted for me a while back but cant get my head around it

radja · Sep 25th 2016

yes it is possible, but it is unfair.

Poslato sa Huawei P8 lite

radja · Sep 25th 2016

It is not fair in case you have server.
But, if you only client its fair.

Poslato sa Huawei P8 lite

**ferdi** · Sep 26th 2016

Quote from CapNCooK

[webif]
httpport = 8888
httpuser = user
httppwd = pass
httprefresh = 10
httptpl = /var/oscam/webif-template
httpcss = /var/oscam/webif-template/site.css
httpjsicons = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,172.16.0.0-172.31.255.255,10.0.0.0-10.255.255.255

Display More

httpjsicons doesn't exist

adamo10 · Nov 19th 2016

Hi !

I have a problem with oscam configuration on Vusolo4k (OpenPli image).

When I transform ccm to oscam everything working but sometimes freezeing.

working this one: (example) file oscam.servers
[reader]
label=(name)
enable=1
protocol=newcamd
key=0102030405060708091011121314
device=(external),10085
user=user
password=password
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

BUT don't working this one:

[reader]
Label = Port_10085
Protocol = newcamd
Key = 0102030405060708091011121314
Device = (external),10085
Account = (user),(password)
Group = 1
fallback = 0
IDENT = 0500:060a00,040620,032500,042200,041700,051e00,041200,042300,050c00,043800,030a00,042800,050800
ReconnectTimeout = 20

I didn't change oscam.cfg and oscam.user. In oscam status tuner don't recognize any server. Any idea ?

**Antepenultim8** · Nov 19th 2016

[reader]
label=a friend
protocol=newcamd
key=0102030405060708091011121314
device=Linux sat,10000
user=myname
password=youname
group=1

this is all I use

and I guess is all that you would need to use too

less is more

user and password

has to be
user
password

adamo10 · Nov 19th 2016

But what's different between first and second ?

**Antepenultim8** · Nov 19th 2016

Account = (user),(password)

this was used
sometime ago

it don't work anymore

adamo10 · Nov 19th 2016

I have one more problem. I have 2 ext. servers. When I was in Ccam tuner was connected with 2 external servers. When firstly was freezing connect to second ect. Now in oscam always connect to only one. In oscam.servers file I put both because was converted form Ccam.cfg and manually checked and both there are.
Also I have plugin "oscam status" and this plugin can't see any oscam servers.

**Antepenultim8** · Nov 19th 2016

I use about 50 ext servers in my oscam
im using a 2m motorised dish and see most of europe

and have about 10 friends connected to me

some servers connect when I'm on a channel as when it's needed
and some servers are off as the person who runs that server is not online
and some servers connect because they have the lowest ecm and the ones that don't have high ecm so not required at the time

and some it maybe a mistake
I have done

ie wrong user and password
as that is where we all go wrong

I cant tell you where and why it don't connect
it's something we learn
and you will learn

Oscam.server config

OSCam Support Forum

Participate now!

Share

Similar Threads

Working Oscam PowerVu Biss Config

Oscam server ,cccam client :cannot receive a certain card but with cccam is ok

OSCAM No config files found please setup oscam first in etc/tuxbox/config

Please help a old timer out..

add to oscam config for powervu

Tags