Hello
I am trying to set up an linux caardserver with oscam as server and waant to connect with mgcamd as clients.
i have installed a infinity usb card reader from wb electronics. its an usb/serial reader
Its in phoenix mode.
When i start oscam ive get this message in telnet.
cardserver@Server:~$ tail -f /var/log/oscam.log
2012/09/21 17:24:48 0 s starting thread check
2012/09/21 17:24:48 0 s check thread started
2012/09/21 17:24:48 0 s canal_digital [mouse] creating thread for device /dev/ttyUSB0
2012/09/21 17:24:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/09/21 17:24:48 0 s anti cascading disabled
2012/09/21 17:24:48 873CB18 c plain dvbapi-client granted (linuxsatsupport, au=off)
2012/09/21 17:24:48 B6C00870 h HTTP Server listening on port 8080
2012/09/21 17:24:48 873CB18 c dvbapi: 2 entries read from oscam.dvbapi
2012/09/21 17:24:48 873CB18 c dvbapi: could not detect api version
2012/09/21 17:24:50 873B2C8 r canal_digital [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/09/21 17:24:51 873B2C8 r canal_digital [mouse] card detected
2012/09/21 17:25:01 873B2C8 r canal_digital [mouse] Error activating card.
2012/09/21 17:25:23 0 --- Skipped 2 duplicated log lines ---
2012/09/21 17:25:23 873B2C8 r canal_digital [mouse] card initializing error
Here is my oscam.server.
# Smargo (mousemode)
# Set enable to 1 if connected to the box, 0 if not used
#--------------------------------------------------------
[reader]
label = canal_digital
protocol = mouse
device = /dev/ttyUSB0
enable = 1
group = 1
emmcache = 1,3,2
#caid = 0B00:000000
#boxid = 00000000
Reberg