Help with OScam and Multiple Cards

I currently have compiled the latest OScam build running on a dedicated linux box (Ubuntu 10.04LTS)

This is setup for OScam to read my s~ly card via an Omnikey 3121 and it works perfectly fine.
My client boxes are a mix of DM500's and Openboxes

I update the entitlements on the card with the following method (as it's the only way I have ever been able to get it to work) ;

DM500 running CCcam 2.1.3 softcam ==[C: Line]==> CCcam213.x86 ==[Newcamd port]==> OScam

I have just purchased the following cards : AlJazeera(0500), Cyfra+(0B01) & Satellite BG(0100) with 3 additional 3121 readers

I would like to add these to my server alongside the S~ly card, and have a couple of questions.

Clients connecting directly to OScam or indirectly via CCcam.x86 (as per my above example) will not be able to receive ECM's other than those for 0963

Example : The Newcamd line in "oscam.conf" only allows for 1 CAID

[newcamd]
port = xxxxx@0963:000000
key = 0102030405060708091011121314
mgclient = 1

Is there a way around this so that I can still update entitlements on the cards ? Is there a way to add multiple ports / CAID to the [newcamd] section of oscam.conf ?

Any help greatly welcomed.

Thanks Chris !!! Can you elaborate a bit further

[oscam.reader]

[reader]
label                         = ***uk
protocol                   = pcsc
device                      = 0
caid                          = 0963
detect                       = cd
ident                         = 0963:000000
group                       = 1
emmcache              = 1,3,2
blockemm-unknown              = 1
blockemm-s                    = 1
blockemm-g                    = 1




[reader]
label                        = JSC
protocol                  = pcsc
device                     = 1
emmcache             = 1,3,2
group                       = 2
caid                         = 0500
ident                        = 0500:042400,042410,fff920
blockemm-unknown              = 1
blockemm-s                    = 1
blockemm-g                    = 1




[reader]
label                         = SatBG
protocol                   = pcsc
device                      = 2
emmcache              = 1,3,2
group                       = 3
caid                          = 0B01
ident                         = 0B01:000000
blockemm-unknown              = 1
blockemm-s                    = 1
blockemm-g                    = 1




[reader]
label                         = SatBG
protocol                   = pcsc
device                      = 3
emmcache              = 1,3,2
group                       = 4
caid                          = 0B01
ident                         = 0B01:000000
blockemm-unknown              = 1
blockemm-s                    = 1
blockemm-g                    = 1




[reader]
label                         = Cyfra+
protoco                    = pcsc
device                      = 0
emmcache              = 1,3,2
group                       = 4
caid                          = 0100
ident                         = 0100:000068
blockemm-unknown              = 1
blockemm-s                    = 1
blockemm-g                    = 1

[oscam.user]

[account]
user = update
pwd = update
description = for local mgcamd or DVBAPI
group = 1,2,[COLOR='#FFFFFF']3,4[/COLOR]
uniq = 1
au = [COLOR='#FFFFFF']***uk,jsc,satbg,cyfra+[/COLOR]
caid = ****  [COLOR='#FFFFFF']<====== What Goes Here ?

[/COLOR]

[oscam.conf]

port = xxxxx@[COLOR='#FFFFFF']0963:000000[/COLOR]
key = 0102030405060708091011121314
mgclient = 1

It's the CAID part that's confusing me ?

Thanks again mate,

So would I be ok to assume this is correct ?

[account]
user = update
pwd = update
description = for local mgcamd or DVBAPI
group = 1,2,3,4
uniq = 1
au = ***uk,jsc,satbg,cyfra+
caid = 0963,0500,0100,0b01

[newcamd]
port = xxxxx@0963:000000
key = 0102030405060708091011121314
mgclient = 1

And the "port = xxxxx@0963:000000" Doesn't matter that we only have the caid 0963 ?

Cheers

This is the problem I'm having trouble getting my head round.

Quote

port=xxxxx@0963:000000
port=xxxxx@0500:000000
etc etc

or maybe it will be

port=xxxxx@0963,0500:000000

None of these are valid under the [newcamd] section in oscam.conf

For example If I have all 4 cards successfully running under oscam and connect to the server using newcamd on port xxxxx. I can only receive ecm's for 0963 requests the other readers are just ignored.

Anyone know how to do this ?

Quote from lfc4ever

port = 1000@0963:000000;1001@0500:000000; etc etc etc

Different ports for each card.

Cheers pal....