There are 25 replies in this Thread which was already clicked 6,192 times. The last Post () by thechief73.
Hello All,
Can anybody help me in setting up my Alien2 as an server using oscam.
I can read my official card in receiver and it clears all paid for channels.
However i cannot send it to my other boxes, 1 in house and the other is my fathers dreambox.
My other box was a dreambox 500 and this worked ok using cccam.
Thanks in advance for any help.
Cheers
TheChief73
Display MoreHello All,
Can anybody help me in setting up my Alien2 as an server using oscam.
I can read my official card in receiver and it clears all paid for channels.
However i cannot send it to my other boxes, 1 in house and the other is my fathers dreambox.
My other box was a dreambox 500 and this worked ok using cccam.
Thanks in advance for any help.
Cheers
TheChief73
Post your oscam configs (hiding any sensetive info) & we should be able to tell you where your going wrong mate.
Post your oscam configs (hiding any sensetive info) & we should be able to tell you where your going wrong mate.
Thanks Ten, Hope this is the info you need, this is what i see in webif.
# oscam.conf generated automatically by Streamboard OSCAM 1.10rc-svn build #
# Read more: gmc.to - Informationen zum Thema satellite tv.
[global]
logfile = stdout
nice = -1
saveinithistory = 1
[monitor]
hideclient_to = 15
appendchaninfo = 0
[dvbapi]
enabled = 1
boxtype = none
user = user1
[webif]
httpport = 8888
httpuser = *******
httppwd = ********
httpallowed = 192.168.1.0-192.168.255.255
httpdyndns = *********
# oscam.user generated automatically by Streamboard OSCAM 1.10rc-svn build #
# Read more: gmc.to - Informationen zum Thema satellite tv.
[account] This was automatily set up??????
user = user1
pwd = password1
group = 1
uniq = 1
[account] This one goes to my dreambox up stairs
user = *******
pwd = *********
description = alien box 2 dreambox connection
group = 1
hostname = 192.168.2.12
caid = 0963
ident = 0963:000000
[account] This is going to my pops he shares subscription costs
user = *******
pwd = ********
group = 1
hostname = 192.168.2.12
monlevel = 0
caid = 0963
ident = 0963:000000
cccmaxhops = 0
cccreshare = 0
#Version Info#
Unix starttime: 1349459931
Starttime: 05.10.12 17:58:51
Version: 1.10rc-svn Rev.
Max PID: unlimited
Active modules:
Web interface support: yes
SSL support: no
DVB API support yes
DVB API with STAPI support: no
Anti-cascading support: yes
ECM doublecheck: no
I***** guessing: yes
Debug mode: yes
LED support: no
Q-Box HD LED support: no
Log history: yes
Monitor: yes
Loadbalancing support: yes
LCD support: no
camd 3.3x: yes
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
gbox: yes
radegast: yes
serial: yes
constant CW: yes
Cardreader: yes
Nagra: yes
I*****: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Anyone????
I can´t see which protocol you are using.
Do i need to run cccam also on my box then?
I can see you are using the same hostname for internal + your dads ( which should be his external ip as I presume is in a different network)??
Cazuela, I thought the host was me so put in my ip, do i leave it blank if i dont know their ip?????
I can't follow all this..
Where are your [reader] 's ?
Post oscam.server too..
Also..
I noticed you set hostname= , in the user-part..
This means that these users can ONLY connect from the IP mentioned there..., which is a internal one..
Please understand..
oscam.user represents all your clients..
oscam.server (readers) are representing real cardreaders or proxies to get ECM's from..
Here is my server file,
[reader]
label = dreambox
protocol = cccam
device = *******
user = ******
password = ******
cccversion = 2.1.3
this is my user
[account]
user = user1
pwd = password1
group = 1
uniq = 1
[account]
user = ******
pwd = ******
caid = 0963
ident = 0963:000000
cccmaxhops = 2
cccreshare = 2
Display MoreHere is my server file,
[reader]
label = dreambox
protocol = cccam
device = *******
user = ******
password = ******
cccversion = 2.1.3
this is my user
[account]
user = user1
pwd = password1
group = 1
uniq = 1
[account]
user = ******
pwd = ******
caid = 0963
ident = 0963:000000
cccmaxhops = 2
cccreshare = 2
There's your problem..
Add group=1 to the reader AND user, and restart oscam...
Group is a required field..
Ok they now look like this: But the top use account is dvapi and is connected however my other dreambox will not connect?
[reader]
label = dreambox
protocol = cccam
device = ******
user = *****
password = ******
group = 1
cccversion = 2.1.3
pwd = password1
group = 1
uniq = 1
[account]
user = ********
pwd = ******
group = 1
cccmaxhops = 2
cccreshare = 2
[account]
user = user1
pwd = password1
group = 1
uniq = 1
[account]
user = *****
pwd = *****
group = 1
cccmaxhops = 2
cccreshare = 2
The DVBAPI is the user that your own receiver is using to decode. Leave that as it is.
You really have to overthink what you're doing.. Otherwise it will become a mess :)
--
What protocol does this remote dreambox use ? CC-Cam ?
Did you open up a port for CC-CAM in oscam ?
Check config->cc-cam to open.
Also, if the dreambox connecting is connecting from internet, you need to forward this port on your router.
Did you do all that ?
Ok, My dreambox is my server running on port 12000
My ccam configuration port in oscam is 15894
Both of these ports are forwarded to the relevant box ip's.
I have just noticed that in the global config there is no server ip, do i need to enter one in here?
Ok, My dreambox is my server running on port 12000
My ccam configuration port in oscam is 15894
Both of these ports are forwarded to the relevant box ip's.
I have just noticed that in the global config there is no server ip, do i need to enter one in here?
I'm lost again..
You say, "My dreambox is my server running on port 12000"
What exactly is running on port 12000 ?
You should use one oscam. This reads the card, and also acts as cc-cam server.
If you setup cc-cam port 15894 in Oscam.. This is the port that clients should connect to..
--
You don't need to add server ip's.
Im sorry to confuse you pal.
What i meant to say is my dreambox used to be my server, im now switching to the alien2 box with oscam to do the serving. However i cant get my other dreambox up stairs to connect.
So i was testing to see if my alien2 box will connect to the dreambox server to receive sub, which it does, but i cant get the alien2 box with oscam to send the sub on to my other box.
Or am i complicating things and need to leave the card in the alien2 box?????
No problem.. But you have to keep it simple..
Just choose one main Oscam, doesn't matter on which device, just choose as you prefer.
Add the cardreader to this oscam, and open a CC-Cam port. Then create users for every box you want to connect additionally.
Last step is to create a c-line from the remote receiver, to the IP and port chosen on main oscam server.
Put a user/pass in the c-line, which you have created in Oscam.
That should really be it...
Ok CapNcook,
I have connections both ways now thanks for that. But even though my card is in the box and clearing channels it is not forwarding to clients any ideas?
We ourselves can not get involved in card sharing talk as I am sure you can understand, so I will leave that part to others, but what I can say is it's likely you have the MCAS pluging installed and running at the moment which is how your Alien 2 is clearing channels, and that's perfectly fine if you just want to use the card in this receiver and nothing more, if you want to use this card with OScam though you will need to disable the MCAS plugin first of all and then add a new [reader] setup to the oscam.server file to ensure it's now OScam that's taking control of your Alien 2 card readers and reading the card that's in the slot, sci0 = top slot and sci1 = bottom slot.
Don’t have an account yet? Register yourself now and be a part of our community!
