hellllllllllllllllllllpppp no net to server

There are 12 replies in this Thread which was already clicked 1,731 times. The last Post () by Knippy.

  • did a update on my server last night and for some reason after that it killed it


    i can get channels only via local network and no one can connect to the server


    i did a ping test on google and bbc comes back unknown host


    tried apt-get updates ect, all come back as failed


    rebooted router, tried new cables, some reason now on boot up i get a waiting 60 seconds for network as well:snicker:
    anyone free for help asap

  • if i do a ifconfig i get



    root@ubuntu:~# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:13:d4:1d:26:0e
    inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::213:d4ff:fe1d:260e/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:1826 errors:0 dropped:0 overruns:0 frame:0
    TX packets:979 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:207952 (207.9 KB) TX bytes:563360 (563.3 KB)
    Interrupt:22


    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:40 errors:0 dropped:0 overruns:0 frame:0
    TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:3365 (3.3 KB) TX bytes:3365 (3.3 KB)

  • Sounds like your routes are broken..


    Fire these commands, and post the output here...
    - cat /etc/resolv.conf
    - cat /etc/network/interfaces
    - route
    - traceroute 8.8.8.8


    Thx


  • cat /etc/resolv.conf
    # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
    # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
    nameserver 192.168.0.1


    cat /etc/network/interfaces
    # This file describes the network interfaces available on your system
    # and how to activate them. For more information, see interfaces(5).


    # The loopback network interface
    auto lo
    iface lo inet loopback


    # The primary network interface
    auto eth0
    iface eth0 inet dhcp


    route
    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface


    this came up after running oscam -b


    route
    Kernel IP routing table
    Destination Gateway Genmask Flags Metric Ref Use Iface
    default 192.168.0.1 0.0.0.0 UG 100 0 0 eth0
    192.168.0.0 * 255.255.255.0 U 0 0 0 eth0



    root@ubuntu:~# traceroute 8.8.8.8
    The program 'traceroute' can be found in the following packages:
    * inetutils-traceroute
    * traceroute
    Try: apt-get install <selected package>


    root@ubuntu:~# ping google.com
    ping: unknown host google.com

  • do

    apt-get install traceroute


    and after fire the traceroute command again and post output..


    (always use [ code ] block to post outputs for readability...)

  • i dont think you saw my post mate right, i cant do any apt-get at all, as no net???


    thanks as well on the code point


  • What version of Ubuntu are you using exactly .. ?


    You can do a lsb_release -a to show..


    (in your last post, you used [ quote ].. use [ code ] [ / code ] (without the spacings)


  • sorted it was a mac problem


    OK.. Soo.. You solved the problem now ?
    And "mac" ??


    You seem to be connected...


    Does ping Google still gives an error now ?

  • Quote

    ping google.com
    PING google.com (173.194.34.65) 56(84) bytes of data.
    64 bytes from lhr14s19-in-f1.1e100.net (173.194.34.65): icmp_req=1 ttl=54 time=21.0 ms
    64 bytes from lhr14s19-in-f1.1e100.net (173.194.34.65): icmp_req=2 ttl=54 time=18.9 ms
    64 bytes from lhr14s19-in-f1.1e100.net (173.194.34.65): icmp_req=3 ttl=53 time=14.5 ms


    it somehow updating my mac and my router blocked it

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management