Amiko Alien2 HD flash

Sounds to me like you need to put in back into spark software first then start again by installing all the spark updates then move onto the e2 software.

Quote from ben361

How To Upgrade Amiko Alien 2 Enigma2 Image Via USB

dear friend I'm with a AMIKO alien2 not have to boot, is frozen in time, I press the OK button and nothing happens, and nothing I've tried putty, and DCC Filezila Amiko alien2 not think IP Even, as an aid deime I can not send it to the supplier and Spain sat25 store because I live in Brazil, say you have to write the flash even if it's with a gravdora foreign, the way I solve that, other than I did not send to suppliers and I already lost 2 receivers Amiko 8340 that Brazil's postal steal, and luckily I got it, I did not use or 24 hours he gave this problem after he finished a atualisação gave an onscreen mensgem not noticed

Upgrade Enigma2 by USB

Preparation:
1.We only recommend Kingston USB stick, we don’t support USB hard disk, you can try another usb stick.
2.Please make sure your USB stick only have 1 partition and the file system is FAT32
3.Set default booting system to [enigma2].
Upgrade Step:
1.Make sure [C:/engima2] is exist, if not, please create this folder.
2.copy [uImage] and [e2jffs2.img] to [C:/engima2]
3.Connect USB stick to STB
4.Keep Pressing [OK] Button in Front Panel, then power on STB.
5.After 5 seconds, you will see [Forc] in LED, release [OK] button and press [align=right] Button.
then press down button > you will see [enig]
now press [align=right] Button, you will see [fact] for a moment.
6.if everything OK, You will see [U LD] shining in LED
7.if upgrade success, You will see [SUCC] and STB reboot automatically
If upgrade not finishes in 5 minutes, then there must be something wrong, please check your configuration and re-try.

try this
you can try another e2 image.
HDMU or pkteam

Display More

dear friend I'm with a AMIKO alien2 not have to boot, is frozen in time, I press the OK button and nothing happens, and nothing I've tried putty, and DCC Filezila Amiko alien2 not think IP Even, as an aid deime I can not send it to the supplier and Spain sat25 store because I live in Brazil, say you have to write the flash even if it's with a gravdora foreign, the way I solve that, other than I did not send to suppliers and I already lost 2 receivers Amiko 8340 that Brazil's postal steal, and luckily I got it, I did not use or 24 hours he gave this problem after he finished a atualisação gave an onscreen mensgem not noticed what it was and had to Preca then hung out with then died

Reveivers as AMIKO 8900 Alien, AMIKO2, Golden Media Triplex, Etc. belong to the kind of FULAN
receivers, so in some ways are different for other ones but they use the same DCC as the
DREAMBOX and CCcam or OSCAM as well. They are difficult to program so we must have patience
and experience and you must have the DREAMBOX DCC. Amiko1 has proc. 7111. AMIKO2 have 7162

SPARK

1º- If you have the image above xx51 you must update the image in the menu to xx51 (It is in SPARK menu)
because it has the new BOOTLOADER for SPARK and ENIGMA2. It take time. After you must update to xx61 and not
or other ( EUROPE )
2º-This image works with Cccam but the image does not have it, so you must get the plugin named "plugin"
and then put it in a pen FORMATED in FAT32. Go to plugin menu and load it
Then you have Cccamxx14. Key and it must be GREEN.
3º- Now you have Cccam and Cccam.cfg. Go to /VAR/KEYS/ and edit Cccam.cfg as the same
with DREAMBOX with DCC. Normaly users only use ENIGMA2

ENIGMA2

1º- Get in this forum a HDMU image ( 7162 ) is the best and have almost everything.
After, I remember to get the REVOLUTION SKINS ( Black ) ( White ) etc. because
these skins are exclusive of the HDMU image.
2º- Get a pen formated in FAT32 and make a folder " enigma2 "
3º- After decompress the image, you will get 2 files and send them to " enigma2" pen
4º- Receiver OFF
Pen with the image in the back usb
Key ON + O.K. at same time
When you see Force, leave the key OK
Key CH- till you see Enig.
key volume +
It will flash. It take time
When you see Succ and then BOOT, take off the pen
5º- In enigma2 it works with OSCAM. It is in menu. There are 2 OSCAM, 6666 and other
I use OSCAM 6666 and to activate you must go to menu the HDMU center and key GREEN
Before you have to go to the plugin menu and get it there. There you will find plenty of
plugins to download.
6º - The OSCAM works like the Cccam and you will find to edit in /VAR/KEYS/OSCAM.server
just follow instructions
ENABLE = 1
FILE = xxxxxxxxx,port
USER= xxxxxxxxxx
PASS= xxxxxxxxxx

There are much more to say but you must be-cool and you will get more experience.....