i have install oscam 7690 new install, what is happening is i can see the card entitlments ok!! i also can see me connected to the server local but not clearing channels???????
-
-
Its harder to see if you don´t put your conf. I read somewhere..
Tried to change oscam to another version.. only for test?
-
[global]
logfile = /var/log/oscam.log
nice = -1
preferlocalcards = 1
saveinithistory = 1
waitforcards = 1
failbancount = 5
failbantime = 1440
cachedelay = 120
clientmaxidle = 120
bindwait = 120
resolvedelay = 30
keepalive = 1[monitor]
hideclient_to = 15
appendchaninfo = 0[newcamd]
port = 100xx@0963:000000
key = 0102030405060708091011121314
debug = 255
keepalive = 1
mgclient = 1[webif]
httpport = xxxx
httpuser = admin
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 -
post open? u using cccam or oscam to connect to server have u added a user group etc
-
post oscam.conf, oscam.user and oscam.server - if you are connected to CCcam client - post your CCcam.cfg - please explain a bit more about your setup - for example - oscam on pc server connected to receiver with cccam? oscam and cccam on receiver, oscam alone on receiver? - this is all key to help and will save time and get you sorted quicker - remember to omit any sensitive info - use ### instead.
-
#steve
[reader]
label = ***_uk
protocol = pcsc
device = 0
caid = 0963
ident = 0963:000000
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-u = 0
blockemm-unknown = 1
blockemm-s = 0
blockemm-g = 1
cacheex = 1
dropbadcws = 1[account]
user = usr
pwd = pass
group = 3
monlevel = 1
caid = 0963
ident = 0963:000000no just oscam to read the card to vps csp
-
not familar myself with vps/csp setup but it springs out that the account in oscam.user has group=3 and your card has group=1 - this being the case, the client connected to the user account will not be able to see your card as you haven't included group 1 in the user account.
-
i have oscam running ubuntu 10.4, i have mgcam running on my duo which im connecting it local on my network
2012/10/11 23:52:02 0 --- Skipped 3 duplicated log lines ---
2012/10/11 23:52:02 B72254C0 c usr (0963&000000/0000/1841/62:349B): not found (122 ms) by ***_uk
2012/10/11 23:52:04 B72254C0 c usr (0963&000000/0000/1841/62:349B): not found (120 ms) by ***_uk
2012/10/11 23:52:05 B72086A8 r ***_uk [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/11 23:52:05 B72254C0 c usr (0963&000000/0000/1841/62:7FD6): not found (84 ms) by ***_uk
2012/10/11 23:52:07 B72254C0 c usr (0963&000000/0000/1841/62:7FD6): not found (120 ms) by ***_uk
2012/10/11 23:52:12 0 --- Skipped 3 duplicated log lines ---
2012/10/11 23:52:12 B72086A8 r ***_uk [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/11 23:52:12 B72254C0 c usr (0963&000000/0000/1841/62:B886): not found (76 ms) by ***_uk
2012/10/11 23:52:14 B72254C0 c usr (0963&000000/0000/1841/62:B886): not found (120 ms) by ***_uki can see me connected but not clearing channels
-
reader
group =1user
group = 1done that still no joy
-
[reader]
label = slyhd
description = slyhd
protocol = pcsc
device = 0
caid = 0963
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1[account]
user = usr
pwd = pass
group = 1
monlevel = 1
caid = 0963
ident = 0963:000000 -
still no go!!!!!!!!!!!!
2012/10/12 00:22:58 8462F70 r slyhd [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/12 00:22:58 8487B70 c usr (0963&000000/0000/0EE5/80:8454): not found (94 ms) by slyhd
2012/10/12 00:23:00 8487B70 c usr (0963&000000/0000/0EE5/80:8454): not found (120 ms) by slyhd
2012/10/12 00:23:07 0 --- Skipped 4 duplicated log lines ---
2012/10/12 00:23:07 8462F70 r slyhd [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/12 00:23:07 8487B70 c usr (0963&000000/0000/0EE5/80:A6C8): not found (93 ms) by slyhd
2012/10/12 00:23:08 8487B70 c usr (0963&000000/0000/0EE5/80:A6C8): not found (120 ms) by slyhd
2012/10/12 00:23:14 0 --- Skipped 3 duplicated log lines ---
2012/10/12 00:23:14 8462F70 r slyhd [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/12 00:23:14 8487B70 c usr (0963&000000/0000/0EE5/80:9C60): not found (93 ms) by slyhd
2012/10/12 00:23:15 8487B70 c usr (0963&000000/0000/0EE5/80:9C60): not found (120 ms) by slyhd
2012/10/12 00:23:22 0 --- Skipped 4 duplicated log lines ---
2012/10/12 00:23:22 8462F70 r slyhd [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/12 00:23:22 8487B70 c usr (0963&000000/0000/0EE5/80:7838): not found (96 ms) by slyhd
2012/10/12 00:23:23 8487B70 c usr (0963&000000/0000/0EE5/80:7838): not found (120 ms) by slyhd -
mate im awake for a hr u got teamviewer, u have also been asked what box your using and setup , what have u put in your box as a config
also have u restarted oscam
-
rebooting server? silly question maybe if you have - but was helping someone yesterday and this sorted it! reboot client and server and go back make sure that your user account still has the same group as reader set.
-
o i see mgcam, u put line in box as 100xx ect
-
ive install oscam onto ubuntu with omnikey reader. oscam can read the 0963 card entitlements. ive mgcamd on duo, ive linked the server to the box local, Oscam not clearing any paid channels.
2012/10/12 00:22:58 8462F70 r slyhd [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/12 00:22:58 8487B70 c usr (0963&000000/0000/0EE5/80:8454): not found (94 ms) by slyhd
2012/10/12 00:23:00 8487B70 c usr (0963&000000/0000/0EE5/80:8454): not found (120 ms) by slyhd
2012/10/12 00:23:07 0 --- Skipped 4 duplicated log lines ---
2012/10/12 00:23:07 8462F70 r slyhd [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/12 00:23:07 8487B70 c usr (0963&000000/0000/0EE5/80:A6C8): not found (93 ms) by slyhd
2012/10/12 00:23:08 8487B70 c usr (0963&000000/0000/0EE5/80:A6C8): not found (120 ms) by slyhd
2012/10/12 00:23:14 0 --- Skipped 3 duplicated log lines ---
2012/10/12 00:23:14 8462F70 r slyhd [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/12 00:23:14 8487B70 c usr (0963&000000/0000/0EE5/80:9C60): not found (93 ms) by slyhd
2012/10/12 00:23:15 8487B70 c usr (0963&000000/0000/0EE5/80:9C60): not found (120 ms) by slyhd
2012/10/12 00:23:22 0 --- Skipped 4 duplicated log lines ---
2012/10/12 00:23:22 8462F70 r slyhd [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/12 00:23:22 8487B70 c usr (0963&000000/0000/0EE5/80:7838): not found (96 ms) by slyhd
2012/10/12 00:23:23 8487B70 c usr (0963&000000/0000/0EE5/80:7838): not found (120 ms) by slyhd -
try putting in boxid:
-
I havent add boxkey in reader config. Once i start oscam in webinfo i can see the boxkey!
-
ye but i find that untill i manually enter boxid it doesnt run channels
you might be the same
worth a try?
-
ps
you dont put it in boxkey:put it in boxid:
-
ps
you dont put it in boxkey:put it in boxid:
I am interested to know what different type of cards are out there..
Because, i also have SLY UK locally, and don't need the boxid/key..
I did read about the users claiming needing to add it..So i wonder.. Who got SLY UK, and needs the boxid ?
--
Also this is my config (for smargo, change to pcsc):
From startup log i can see my boxid and serial is auto-deteced.I advise to put detect=cd, and also remove both mhz values from your reader.
oscam.server
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!