how to solve the problem below. It often occurs at 30:59 am. I,am Using Smargo reader and OSCAM 1.20-unstable_svn build #7315
Code
2012/10/13 03:56:01 EE4060 c exabytes (09AC&000000/0000/4F56/B7:566A): found (137 ms) by reader-4 (P/1/1/4)
2012/10/13 03:56:01 ED48F0 c BEST2 (09AC&000000/0000/4F4E/B7:C594): found (139 ms) by reader-2 (P/1/1/4)
2012/10/13 03:56:01 EE4060 c exabytes (09AC&000000/0000/4F4E/B7:C594): cache2 (116 ms) by reader-2 (F/0/1/4)
2012/10/13 03:56:01 DB10B0 c BEST1 (09AC&000000/0000/4F4D/B7:5F13): found (134 ms) by reader-3 (P/1/1/4)
2012/10/13 03:56:01 EE4060 c exabytes (09AC&000000/0000/4F4D/B7:5F13): cache2 (127 ms) by reader-3 (F/0/1/4)
2012/10/13 03:56:01 EE4060 c exabytes (09AC&000000/0000/4F5E/B7:A7C6): found (169 ms) by reader-4 (P/1/1/4)
2012/10/13 03:56:01 DB10B0 c BEST1 (09AC&000000/0000/4F5E/B7:A7C6): cache2 (143 ms) by reader-4 (F/0/1/4)
2012/10/13 03:56:01 2C004490 r reader-2 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/13 03:56:01 EE4060 c exabytes (09AC&000000/0000/4F57/B7:9DE2): found (261 ms) by reader-3 (P/1/1/4)
2012/10/13 03:56:01 DB10B0 c BEST1 (09AC&000000/0000/4F57/B7:9DE2): cache2 (230 ms) by reader-3 (F/0/1/4)
2012/10/13 03:56:01 2C00A400 r reader-4 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/13 03:56:01 EE4060 c exabytes (09AC&000000/0000/4EEB/B7:B4FE): not found (1623 ms) by reader-4 (F/3/1/4)
2012/10/13 03:56:01 2C0071B0 r reader-3 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2012/10/13 03:56:01 0 s thread 7F156E137700 exit with signal 15
2012/10/13 03:56:01 0 s cardserver down
2012/10/13 03:56:01 0 s killing client cccam
2012/10/13 03:56:01 0 s killing client go
2012/10/13 03:56:01 0 --- Skipped 4 duplicated log lines ---
2012/10/13 03:56:01 0 s killing client BEST2
2012/10/13 03:56:01 0 s killing client go
2012/10/13 03:56:01 0 s killing client exabytes
2012/10/13 03:56:01 0 s killing client BEST1
2012/10/13 03:56:01 0 s killing client go
2012/10/13 03:56:01 0 s reader-1 [videoguard2] Killing reader
2012/10/13 03:56:01 0 s reader-2 [videoguard2] Killing reader
2012/10/13 03:56:01 0 s reader-3 [videoguard2] Killing reader
2012/10/13 03:56:01 0 s reader-4 [videoguard2] Killing reader
2012/10/13 03:56:01 0 s userdb 646 accounts freed
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Oct 13 03:59:01 2012
-------------------------------------------------------------------------------
2012/10/13 03:59:01 0 s starting thread log_list_thread
2012/10/13 03:59:01 0 s log_list_thread thread started
2012/10/13 03:59:01 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7315 (x86_64-linux-gnu-ssl-libusb)
2012/10/13 03:59:01 0 s version=1.20-unstable_svn, build #7315, system=x86_64-linux-gnu-ssl-libusb, nice=-20
2012/10/13 03:59:01 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2012/10/13 03:59:01 0 s max. logsize=10000 Kb, loghistorysize=4096 bytes
2012/10/13 03:59:01 0 s client timeout=1800 ms, fallback timeout=1500 ms, cache delay=0 ms
2012/10/13 03:59:01 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2012/10/13 03:59:01 0 s userdb reloaded: 646 accounts loaded, 41 expired, 14 disabled
2012/10/13 03:59:01 0 s signal handling initialized (type=sysv)
2012/10/13 03:59:01 0 s 139 service-id's loaded in 0ms
2012/10/13 03:59:01 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/10/13 03:59:01 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/10/13 03:59:01 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2012/10/13 03:59:01 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
2012/10/13 03:59:01 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
2012/10/13 03:59:01 0 s Starting listener 0
2012/10/13 03:59:01 0 s monitor: disabled
2012/10/13 03:59:01 0 s Starting listener 0
2012/10/13 03:59:01 0 s camd35: disabled
2012/10/13 03:59:01 0 s Starting listener 0
2012/10/13 03:59:01 0 s cs378x: disabled
2012/10/13 03:59:01 0 s Starting listener 0
2012/10/13 03:59:01 0 s newcamd: initialized (fd=5, port=7898, crypted)
2012/10/13 03:59:01 0 s -> CAID: 09AC PROVID: 000000
2012/10/13 03:59:01 0 s Starting listener 0
2012/10/13 03:59:01 0 s cccam: initialized (fd=6, port=10000, crypted)
2012/10/13 03:59:01 0 s Starting listener 0
2012/10/13 03:59:01 0 s pandora: disabled
2012/10/13 03:59:01 0 s Starting listener 0
2012/10/13 03:59:01 0 s csp: disabled
2012/10/13 03:59:01 0 s Starting listener 0
2012/10/13 03:59:01 0 s radegast: disabled
2012/10/13 03:59:01 0 s starting thread http
2012/10/13 03:59:01 0 s http thread started
2012/10/13 03:59:01 0 s starting thread reader check
2012/10/13 03:59:01 0 s reader check thread started
2012/10/13 03:59:01 0 s starting thread check
2012/10/13 03:59:01 0 s check thread started
2012/10/13 03:59:01 0 s reader-1 [smartreader] creating thread for device 002:008
2012/10/13 03:59:01 CC0008C0 h HTTP Server listening on port 8801
2012/10/13 03:59:01 0 s reader-2 [smartreader] creating thread for device 002:004
2012/10/13 03:59:01 0 s reader-3 [smartreader] creating thread for device 002:005
2012/10/13 03:59:01 0 s reader-4 [smartreader] creating thread for device 002:006
2012/10/13 03:59:01 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/10/13 03:59:01 0 s waiting for local card init
2012/10/13 03:59:01 12606A0 r reader-1 [smartreader] Using 0x82 as endpoint for smartreader hardware detection
2012/10/13 03:59:01 12606A0 r Found smartreader device 002:008
2012/10/13 03:59:01 1262190 r reader-2 [smartreader] Using 0x82 as endpoint for smartreader hardware detection
2012/10/13 03:59:01 12606A0 r reader-1 [smartreader] Reader initialized (device=002:008, detect=cd, mhz=686, cardmhz=10)
2012/10/13 03:59:01 1262190 r Found smartreader device 002:004
2012/10/13 03:59:01 15ACF50 r reader-4 [smartreader] Using 0x82 as endpoint for smartreader hardware detection
2012/10/13 03:59:01 15ACF50 r Found smartreader device 002:006
2012/10/13 03:59:01 1262190 r reader-2 [smartreader] Reader initialized (device=002:004, detect=cd, mhz=480, cardmhz=357)
2012/10/13 03:59:01 15AB580 r reader-3 [smartreader] Using 0x82 as endpoint for smartreader hardware detection
2012/10/13 03:59:01 15ACF50 r reader-4 [smartreader] Reader initialized (device=002:006, detect=cd, mhz=686, cardmhz=10)
2012/10/13 03:59:01 15AB580 r Found smartreader device 002:005
2012/10/13 03:59:01 15AB580 r reader-3 [smartreader] Reader initialized (device=002:005, detect=cd, mhz=686, cardmhz=10)
2012/10/13 03:59:02 15AB580 r reader-3 [smartreader] card detected
2012/10/13 03:59:02 15ACF50 r reader-4 [smartreader] card detected
2012/10/13 03:59:02 1262190 r reader-2 [smartreader] card detected
2012/10/13 03:59:02 12606A0 r reader-1 [smartreader] card detected
2012/10/13 03:59:04 1262190 r reader-2 [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2012/10/13 03:59:04 15AB580 r reader-3 [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2012/10/13 03:59:05 1262190 r reader-2 [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2012/10/13 03:59:05 15ACF50 r reader-4 [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2012/10/13 03:59:05 12606A0 r reader-1 [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2012/10/13 03:59:05 15AB580 r reader-3 [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.86 Mhz
2012/10/13 03:59:05 15ACF50 r reader-4 [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.86 Mhz
2012/10/13 03:59:05 12606A0 r reader-1 [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.86 Mhz
2012/10/13 03:59:06 1262190 r reader-2 [smartreader] Card type: AZTV
2012/10/13 03:59:06 1262190 r reader-2 [smartreader] Rom version: 10A6
2012/10/13 03:59:07 15AB580 r reader-3 [smartreader] card system not supported
2012/10/13 03:59:07 15AB580 r reader-3 [smartreader] Normal mode failed, reverting to Deprecated Mode
2012/10/13 03:59:07 1262190 r reader-2 [smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2012/10/13 03:59:07 1262190 r reader-2 [smartreader] found cardsystem videoguard2
2012/10/13 03:59:07 1262190 r reader-2 [videoguard2] card detected
2012/10/13 03:59:07 1262190 r reader-2 [videoguard2] type: VideoGuard Astro Malaysia (09AC)
2012/10/13 03:59:07 1262190 r reader-2 [smartreader] Doing fast reset
2012/10/13 03:59:08 1262190 r reader-2 [smartreader] ATR: 3F FF 15 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 15
2012/10/13 03:59:08 15ACF50 r reader-4 [smartreader] card system not supported
2012/10/13 03:59:08 15ACF50 r reader-4 [smartreader] Normal mode failed, reverting to Deprecated Mode
2012/10/13 03:59:08 12606A0 r reader-1 [smartreader] card system not supported
2012/10/13 03:59:08 12606A0 r reader-1 [smartreader] Normal mode failed, reverting to Deprecated Mode
2012/10/13 03:59:08 1262190 r reader-2 [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2012/10/13 03:59:09 1262190 r reader-2 [smartreader] card system not supported
2012/10/13 03:59:09 1262190 r reader-2 [smartreader] Normal mode failed, reverting to Deprecated Mode
2012/10/13 03:59:09 1262190 r reader-2 [smartreader] Doing fast reset
2012/10/13 03:59:10 15AB580 r reader-3 [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2012/10/13 03:59:10 15AB580 r reader-3 [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.86 Mhz
2012/10/13 03:59:10 1262190 r reader-2 [smartreader] Error activating card.
2012/10/13 03:59:11 1262190 r reader-2 [smartreader] Doing fast reset
2012/10/13 03:59:11 15ACF50 r reader-4 [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2012/10/13 03:59:11 12606A0 r reader-1 [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
2012/10/13 03:59:11 15ACF50 r reader-4 [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.86 Mhz
2012/10/13 03:59:11 12606A0 r reader-1 [smartreader] Maximum frequency for this card is formally 5 Mhz, clocking it to 6.86 Mhz
2012/10/13 03:59:12 1262190 r reader-2 [smartreader] Error activating card.
2012/10/13 03:59:12 15AB580 r reader-3 [smartreader] card system not supported
2012/10/13 03:59:12 15AB580 r reader-3 [smartreader] card initializing error
2012/10/13 03:59:12 1262190 r reader-2 [smartreader] Doing fast reset
2012/10/13 03:59:12 15ACF50 r reader-4 [smartreader] card system not supported
2012/10/13 03:59:12 15ACF50 r reader-4 [smartreader] card initializing error
2012/10/13 03:59:13 1262190 r reader-2 [smartreader] Error activating card.
2012/10/13 03:59:14 1262190 r reader-2 [smartreader] card initializing error
2012/10/13 03:59:14 12606A0 r reader-1 [smartreader] card system not supported
2012/10/13 03:59:14 12606A0 r reader-1 [smartreader] card initializing error
2012/10/13 03:59:15 0 s init for all local cards done
2012/10/13 03:59:15 0 s anti cascading disabled
2012/10/13 03:59:15 15AF5C0 c client connected to 7898 port
2012/10/13 03:59:15 15AF5C0 c anonymous disconnected from 127.0.0.1
2012/10/13 03:59:15 15B76D0 c client connected to 7898 port
2012/10/13 03:59:15 15B76D0 c WARNING: invalid client
2012/10/13 03:59:15 15B76D0 c anonymous disconnected from 203.124.96.155
2012/10/13 03:59:15 15B5D00 c client connected to 7898 port
2012/10/13 03:59:15 15B5D00 c WARNING: invalid client
2012/10/13 03:59:15 15BAA70 c client connected to 7898 port
2012/10/13 03:59:15 0 --- Skipped 1 duplicated log lines ---
2012/10/13 03:59:15 15B4330 c WARNING: invalid client
2012/10/13 03:59:15 15B0F90 c client connected to 7898 port
2012/10/13 03:59:15 0 --- Skipped 2 duplicated log lines ---
2012/10/13 03:59:15 15B2960 c WARNING: invalid client
2012/10/13 03:59:15 15B2960 c anonymous disconnected from 203.124.96.155
2012/10/13 03:59:15 0 --- Skipped 2 duplicated log lines ---
2012/10/13 03:59:15 15BC440 c client connected to 7898 port
2012/10/13 03:59:15 15B0F90 c WARNING: invalid client
2012/10/13 03:59:15 15B0F90 c anonymous disconnected from 203.124.96.155
2012/10/13 03:59:15 15BDE10 c client connected to 7898 port
2012/10/13 03:59:15 15BDE10 c encrypted newcamd:7898-client 127.0.0.1 granted (cccam, au=off)
2012/10/13 03:59:15 15BDE10 c user cccam authenticated successfully (CCcam)
2012/10/13 03:59:15 15BDE10 c AU disabled for user cccam
2012/10/13 03:59:15 15BAA70 c encrypted newcamd:7898-client 103.13.120.117 granted (exabytes, au=off)
2012/10/13 03:59:15 15BAA70 c user exabytes authenticated successfully (OSCam)
2012/10/13 03:59:15 15BAA70 c AU disabled for user exabytes
2012/10/13 03:59:15 15B90A0 c anonymous disconnected from 203.124.96.155
2012/10/13 03:59:16 0 --- Skipped 1 duplicated log lines ---
2012/10/13 03:59:16 15BAA70 c exabytes (09AC&000000/0000/4E25/B7:57C5): rejected group (1 ms) (0/0/0/0) (no matching reader)
2012/10/13 03:59:18 15AF5C0 c client connected to 7898 port
2012/10/13 03:59:18 15AF5C0 c encrypted newcamd:7898-client 203.124.96.155 granted (go, au=off)
2012/10/13 03:59:18 15AF5C0 c user go authenticated successfully (CCcam)
2012/10/13 03:59:18 15AF5C0 c AU disabled for user go
2012/10/13 03:59:19 15BC440 c client connected to 7898 port
2012/10/13 03:59:19 0 --- Skipped 2 duplicated log lines ---
2012/10/13 03:59:19 15BC440 c encrypted newcamd:7898-client 203.124.96.155 granted (go, au=off)
2012/10/13 03:59:19 15BC440 c user go authenticated successfully (CCcam)
2012/10/13 03:59:19 15BC440 c AU disabled for user go
2012/10/13 03:59:19 15B0F90 c encrypted newcamd:7898-client 203.124.96.155 granted (go, au=off)
2012/10/13 03:59:19 15B0F90 c user go authenticated successfully (CCcam)
2012/10/13 03:59:19 15B0F90 c AU disabled for user go
2012/10/13 03:59:19 15B2960 c encrypted newcamd:7898-client 203.124.96.155 granted (go, au=off)
2012/10/13 03:59:19 15B2960 c user go authenticated successfully (CCcam)
2012/10/13 03:59:19 15B2960 c AU disabled for user go
2012/10/13 03:59:23 15B4330 c client connected to 7898 port
2012/10/13 03:59:23 15B4330 c encrypted newcamd:7898-client 203.124.96.155 granted (go, au=off)
2012/10/13 03:59:23 15B4330 c user go authenticated successfully (CCcam)
2012/10/13 03:59:23 15B4330 c AU disabled for user go
2012/10/13 03:59:24 15B5D00 c client connected to 7898 port
2012/10/13 03:59:25 15B5D00 c encrypted newcamd:7898-client 203.124.96.155 granted (go, au=off)
2012/10/13 03:59:25 15B5D00 c user go authenticated successfully (CCcam)
2012/10/13 03:59:25 15B5D00 c AU disabled for user go
2012/10/13 03:59:25 15B76D0 c client connected to 7898 port
2012/10/13 03:59:25 15B76D0 c encrypted newcamd:7898-client 203.124.96.155 granted (go, au=off)
2012/10/13 03:59:25 15B76D0 c user go authenticated successfully (CCcam)
2012/10/13 03:59:25 15B76D0 c AU disabled for user go
2012/10/13 03:59:33 15BAA70 c exabytes (09AC&000000/0000/2972/B7:5149): rejected group (1 ms) (0/0/0/0) (no matching reader)
2012/10/13 03:59:38 15B90A0 c client connected to 7898 port
2012/10/13 03:59:38 15B90A0 c encrypted newcamd:7898-client 103.1.154.73 granted (BEST2, au=off)
2012/10/13 03:59:38 15B90A0 c user BEST2 authenticated successfully (OSCam)
2012/10/13 03:59:38 15B90A0 c AU disabled for user BEST2
2012/10/13 03:59:39 15BFD10 c client connected to 7898 port
2012/10/13 03:59:39 15BFD10 c encrypted newcamd:7898-client 124.217.245.142 granted (BEST1, au=off)
2012/10/13 03:59:39 15BFD10 c user BEST1 authenticated successfully (OSCam)
2012/10/13 03:59:39 15BFD10 c AU disabled for user BEST1
2012/10/13 03:59:45 15B90A0 c BEST2 (09AC&000000/0000/4FB6/B7:FE2D): rejected group (1 ms) (0/0/0/0) (no matching reader)
2012/10/13 04:00:02 15BAA70 c exabytes (09AC&000000/0000/4FBA/B7:58D5): rejected group (1 ms) (0/0/0/0) (no matching reader)
2012/10/13 04:00:05 15B4330 c WARNING: invalid client
