hi there my friend has asked me to take a look at his box and it has a problem where it wont start up u plug in the reciver and it comes up with the black hole vu+ screen and at the bottom says starting gui then after a few secs the screen goes green quickly then it loops around again tried unpluging and leaving off for 10mins then on again but just loops around ? i dont know what version of image is on the box nor have i ever flashed a e2 box i have on a e1 500s what should i do
vu+ solo problem
- rigrat1
- Thread is marked as Resolved.
-
-
just to add we knew the ip of the box before this problem and i can still log into the box using vu+ controll center also in telnet it says vuplus 2.0.7 + blackhole 1.6.2 vu solo so i take it thats the image we are using
-
Plenty of guides in the VU+ tutorials section mate.
Step by step tutorial on how to flash your VU+ Duo receiver with a USB stick.
[h=3]How to set up your new Vu+Duo. with ViX[/h]
[h=3]How to USB flash the VU+ SOLO[/h] -
How long you/friend had it mate? Is it a Clone or Original?
lol didnt see Ten replied! :snicker:
Just flash a backup image of the same version and it should sort itself out!
If you want to look at other images you need to know whether its a clone or original as you can't use the latest images on clone version at the moment!
-
hi guys thanks for the replys he says its 8 months old but we dont know wether its an original or not i did see the linux sat logo appear when we first pluged it back in i dont want to kill it can i flash from a stick in this condition ?
-
any more input please guys it says its running vuplus 2.0.7 + blackhole 1.6.2 vu solo in telnet the only image i can find is under the vu+ black hole images are we to asume its an original box and can i flash with usb or must it be a back up image
-
If you are flashing blackhole again just use a version from 1.74 or below & it will be fine, clone or original.
-
black up image?
-
or original, either will be fine mate.
-
hi there i just followed the instuctions for flashing with usb theres not an led on the usb stick but now the led on the box has gone green but is flashing are we done
-
Once the led flashes green remove the usb & restart the box by the reset button on the back, the image should then bootup.
-
ok m8 its now a working box thank u but i cant log in using vu tool box if i try and log in using dcc i put root in user and leave password black all goes green but says login incorect i flashed using an image posted by u this one m8
http://linuxsat-support.com/vu…ady-backup-ten-below.html -
ok m8 its now a working box thank u but i cant log in using vu tool box if i try and log in using dcc i put root in user and leave password black all goes green but says login incorect i flashed using an image posted by u this one m8
http://linuxsat-support.com/vu…ady-backup-ten-below.htmlRead the post again, password = linuxsat although the stb password should still be the same as what the owner has set it to.
-
hi m8 iv tryed the linuxsat password but i still cant connect m8 origanal when i added the c line using vu controll center i dident use any password just left it blank but now i have this problem m8
-
Use the reset password tool in tspanel & you should be able to connect again mate.
-
ok were all up and running shame i cant spell linuxsat lol i was typing luinxsat lol chears for your help
-
master G
Moved the thread from forum Vu+ SOLO Support to forum VU+ SOLO.
VU+ SOLO PVR Ready Linux Enigma2 Receiver Full HD 1080p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!