CCcam getting NOK´s

There are 5 replies in this Thread which was already clicked 2,093 times. The last Post () by claudiuzz.

  • Firstoff Kudos to that fellow for this very clear tutorial!


    http://linuxsat-support.com/li…-3-install-package-9.html


    But i still haven't managed to get everything working properly..
    I'm getting Entitlements on my Smargo in oscam so that's a good thing!


    And in my CCcam's webinfo i can see EMM and Ecm's flowing but i'm not getting any picture!? Just (nok)

    1 ACTIVE CLIENT IN LAST 20 SECONDS
    +---------+---------------+------------+------------+-------+-----------+--------+----------------------------+----------+
    | Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
    +---------+---------------+------------+------------+-------+-----------+--------+----------------------------+----------+
    |user |192.168.1.113 |00d 00:14:17|00d 00:00:11|286 (0)|504 (504) |2.3.0 | FOXlife (nok) | 0.0033s


    What am i doing wrong!?


    TnX!

  • I**** 0604 Card



    It's Just writing and writing

  • My caid 0604 is an dutch cable I****card the provider called ziggo..


    This is the log file:
    2012/12/15 12:41:35 1C34A90 r smartreader_plus [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 37 9A
    2012/12/15 12:41:36 1C34A90 r smartreader_plus [mouse] Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
    2012/12/15 12:41:37 1C34A90 r smartreader_plus [mouse] detect i***** card
    2012/12/15 12:41:37 1C34A90 r smartreader_plus [mouse] I***** SC 57 version 12 revision 1, patch level e
    2012/12/15 12:41:37 1C34A90 r smartreader_plus [mouse] caid: 0604, acs: 6.08, country code: NLD
    2012/12/15 12:41:37 1C34A90 r smartreader_plus [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [mouse] active providers: 4 (059bae,004d00,004d00,004d00)
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [mouse] found cardsystem i*****
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] entitlements for provider: 1, id: 059BAE
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 270F, date: 2009/07/05 - 2009/07/26
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: F000, date: 2009/07/05 - 2009/07/26
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: FFE0, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 0001, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 0003, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 0004, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 000A, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 000B, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 001C, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 01F4, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 01FE, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 0384, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:40 1C34A90 r smartreader_plus [i*****] chid: 03E7, date: 2012/12/15 - 2013/01/14
    2012/12/15 12:41:46 1C34A90 r smartreader_plus [i*****] ready for requests
    2012/12/15 12:41:46 0 s init for all local cards done
    2012/12/15 12:41:46 0 s anti cascading disabled
    2012/12/15 12:41:46 1C397A0 c client connected to 10000 port
    2012/12/15 12:41:46 1C3B180 c client connected to 10000 port
    2012/12/15 12:41:46 1C397A0 c anonymous disconnected from 127.0.0.1
    2012/12/15 12:41:46 1C397A0 c thread 7FC4C87B2700 ended!
    2012/12/15 12:41:46 1C3B180 c anonymous disconnected from 127.0.0.1
    2012/12/15 12:41:46 1C3B180 c thread 7FC4C8775700 ended!
    2012/12/15 12:41:56 1C397A0 c client connected to 10000 port
    2012/12/15 12:41:56 1C397A0 c encrypted newcamd:10000-client 127.0.0.1 granted (cccam, au=auto (1 reader))
    2012/12/15 12:41:56 1C397A0 c user cccam authenticated successfully (CCcam)
    2012/12/15 12:41:56 1C397A0 c AU enabled for user cccam on reader smartreader_plus
    2012/12/15 12:42:29 1C34A90 r smartreader_plus [i*****] cccam emmtype=shared, len=63, idx=3, cnt=1: written (128 ms)
    2012/12/15 12:42:36 1C34A90 r smartreader_plus [i*****] cccam emmtype=shared, len=63, idx=4, cnt=1: written (136


    The Entitlements are green so i think ok


    This are the config's:
    -----------------------------------------------------------------------------------------
    oscam.conf
    -----------------------------------------------------------------------------------------
    [global]
    nice = -1
    WaitForCards = 1
    logfile = stdout
    preferlocalcards = 1
    saveinithistory = 1


    [webif]
    httpport = 8888
    httpuser = admin
    httppwd = admin
    httpallowed = 192.168.0.0-192.168.254.254
    httprefresh = 15


    # protocols
    [newcamd]
    key = 0102030405060708091011121314
    port = 10000@0604:000000;
    # replace **** with your CAID
    -----------------------------------------------------------------------------------
    oscam.server
    -----------------------------------------------------------------------------------
    [Reader]
    label = label
    description = remote
    protocol = smartreader
    device = 001:003
    caid = 0604
    rsakey = 3C8633AAC0D367533DEC7BB2EEEDEB8CA3ADA52E58B99BB34672783277A1DAAC3B6106AD0909774E031B2A6E30195B437683AD0FC599B87D08CEA47BE1B6C76A
    force_i***** = 1
    boxkey = 1122334455667788
    detect = cd
    mhz = 600
    cardmhz = 600
    group = 1
    --------------------------------------------------------------------------------------
    oscam.user
    --------------------------------------------------------------------------------------
    [account]
    user = cccam
    pwd = cccam
    group = 1,2
    monlevel = 0
    au = 1
    ---------------------------------------------------------------------------------------
    CCcam.cfg
    ---------------------------------------------------------------------------------------
    SERVER LISTEN PORT : 12099
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    WEBINFO USERNAME : username
    WEBINFO PASSWORD : Password
    #TELNETINFO USERNAME : USER
    #TELNETINFO PASSWORD : PASS
    #TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME :0
    #OSD USERNAME :root
    #OSD PASSWORD :dreambox
    #OSD PORT :80
    SHOW TIMING : yes
    DEBUG : no
    NEWCAMD CONF : no
    SHOW EXTENEDED CLIENT INFO : yes
    MINI OSD : no
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    PROVIDERINFO FILE : /var/etc/CCcam.
    providers
    CAID PRIO FILE : /var/etc/CCcam.
    prio
    LOG WARNINGS : /tmp/warnings.txt
    SOFTKEY FILE : /var/keys/SoftCam.
    Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    #BOXKEY:
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000


    N: 127.0.0.1 10000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256


    F: user password 2 0 1 { 0:0:1 }


    On my dreambox i can see 1 local card
    But on my oscam webinfo it's c2|cccam|ACTIVE|ON|127.0.0.1|52019|newcamd (CCcam)|16.12.12 13:20:10|00:01:01|0604:00D2
    --by not found (0ms)--|00:00:03|OK


    If i do a straight line to my dreambox i't doesnt work also..

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!