i have flashed the brand new vu duo with vix 3.0 image but after doing the motorised setup with tuner A advanced mode controlling the motor and tuner be as cable connected to lnb. the motor is moving outside with same value as my dm800 longitude. but when i tried to scan i can not pick any channels. so i tried to connect the vu duo to my sly fix dish and there as well no signal through. i wonder if there is a fault with the tuner or is this common with vu boxes.
i have tried the italisat 4 image as well no joy
can someone point me into the right direction here please
cheers
vu+ duo not scanning problem with motorized dish
-
- Motorized Dish Setup
- prof
- Thread is marked as Resolved.
-
Ok,what I would try is using the "satfinder" option in the tuner config menu,it could be that you need to make a slight adjustment to the dish either east/west using the motor.
Try moving the dish to 28e and see if it locks on to the sat,if it doesn't then try the different options with the coloured buttons on the remote to move the dish.
Let us know how you get on.
-
master G
Added the Label Motorized Dish Config -
master G
Changed the title of the thread from “vu duo not scanning problem with motorized dish” to “vu+ duo not scanning problem with motorized dish”.
Your resource for Enigma2 tuner configuration
Find tutorials and support for setting up DVB, advanced FBC, and USB tuners for satellite, cable, and other signal sources. Master your receiver's tuning capabilities. Find dedicated support and guides to configure DVB, FBC, and USB tuners for optimal satellite, cable, and digital TV reception.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
