oscam/cccam debian smargo. client cant connect to cccam

[reader]
label = viasat
protocol = smartreader
device = 002:002
boxid = <MYBOXID>
ecmwhitelist = 093E:88,84,AA,A6,68,98
detect = cd
mhz = 480
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-g = 1

[reader]
label = canaldigital
protocol = smartreader
device = 002:003
caid = 0b00
ident = 0b00:000000
EMMCache = 1,1,0
group = 2

Quote from nisroc

humm it says that only one of the users is online. does that have some thing to do with the first user using port 10000 and the other using poty 10001.

I tried adding:

[newcamd]
key = 0102030405060708091011121314
port = 10001@0b00:000000
keepalive = 1

to get ccam to connect to the second user, but then the first user wouldn't connect either :(

and I'm still only getting 7 entitlements on the canaldigital card :\ is that right?

Display More

[newcamd]
key = 0102030405060708091011121314
port = 10000@096C:000000;10001@0b00:000000
keepalive = 1

Above is what was suggested - so under your [newcamd] part of oscam.conf - delete the one you are using, as it would only allow one card to be used, and replace it with the one above - so long as you are following what master G has suggested then I don't see you will have a problem.

Hi, I don't want to hijack this thread, but I have the same situation, with a slightly different setup. So I hope it is OK for me to post here. If not just tell me so I can start a new thread.

My setup: Linux ClearOS (Centos) 5.4 running oscam-1.20-unstable_svn-r8621. I watch TV from my DM600-PVR running CCcam 2.1.4. Connecting with N: line to Oscam server. I have 3 lines, 3 ports to connect to, 3 cards in my server. One cards is out now (not active right now), 2 cards in the running CD NL + CD NO. All channels are working fine, both FTA and paid.

The issue is that I see no EMMs coming to CD NO. the card for CD NL is receiving EMMs several times a day and in entitlement on the Oscam server I see the management and expire date are up to date. On CD NO I see the entitlements, but the card is never updated. Once a month I need to put it in the original CD NO tuner to have it updated.

My files:

oscam.conf:
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8621
# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.conf.txt

[global]
logfile = 1
disableuserfile = 0
nice = -10
maxlogsize = 0
preferlocalcards = 1
dropdups = 1
block_same_ip = 0
block_same_name = 0
usrfile = /usr/local/etc/harry_oscam_log

[anticasc]
enabled = 1
numusers = 1
samples = 5
aclogfile = ./oscam_ac.log
fakedelay = 1000
denysamples = 4

[newcamd]
port = 34000@093E:000000;34001@0100:00006A;34002@0B00:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12000
nodeid = 32B2431D106413EC
version = 2.1.4
reshare = 0

[dvbapi] ## Section required only if OSCam will also be used as client!
#
# If you want to use OScam for watching TV (not only for reading cards)
# you need to add these lines to oscam.conf FILE: [dvbapi] enabled = 1 au = 1
# boxtype = ...
#
# As with typical clients, oscam's dvbapi can send emm's to your cards to update it.
# Its not required though, you can also have CC-Cam on your receiver, and connect to a
# remote Oscam to update your card there.
#
enabled = 0
au = 1
user = DM600-PVR
boxtype = pc
reopenonzap = 1

[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
hideclient_to = 15

oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8621
# Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.user.txt

[account]
user = DM600-PVR
pwd = xxxxxxxxx
description = Dreambox DM600-PVR
keepalive = 0
au = 1
group = 1
numusers = 1
cccmaxhops = 0
cccreshare = 0

oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8621
# Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt

[reader]
label = usb_cd_no
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
caid = 0B00
detect = cd
ident = 0B00:000000
group = 1
emmcache = 1,1,15

[reader]
label = usb_cd_nl
protocol = mouse
device = /dev/ttyUSB1
smargopatch = 1
caid = 0100
detect = cd
cardmhz = 500
ident = 0100:00006A
group = 1
emmcache = 1,1,15
lb_weight = 1000
ratelimitecm = 4
ratelimitseconds = 11

Then there is the oscam.services, -srvid and -provid, but I guess that is not important here. Let me know if it is relevant.

On my DM600-PVR I use only the basic conf file and have these N. lines:

N: 192.168.11.53 34000 DM600-PVR xxxxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # test VIA-NO OScam PC
N: 192.168.11.53 34001 DM600-PVR xxxxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # test CD_NL OScam PC
N: 192.168.11.53 34002 DM600-PVR xxxxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # test CD_NO OScam PC

Is there anyone out there that can see why my CD NO card is not updating? Thank you in advance for your time ;o)

Hi all,

Just wanted to let you know that the problem was solved by using mgcamd on my DM600 in stead of CCcam 2.1.4. I liked CCcam due to its ease of use as a server but it looks like it is kind of outdated. Versions >2.1.4 have been reported to be unsafe, so I don't see the point in taking the risque.

As a client mgcamd is dead simple to set up. Just one line to enter and your set. Started to receive EMMs within a few seconds :o)