When I looked I checked the box it came in not the actual box lmao it'll be on actual box on back near tuner and also on top of box saying download from this site.
Sent from my GT-I9300 using Tapatalk 2
hehe. I didn't look on the cardboard box, I had a look at the actual tuner :)
Are they both originals buddy? if they are clones you will see a sticker on the rear or under side stating what version they are...
I read yesterday about clones with stickers stating the version. I had a look and could not find any. I'll have another look when I get home from work but I'm pretty sure there were none.
Are there any other tell tale signs of a clone Vu+ Solo box?
I got two VU+ Solo boxes from a mate, he asked me to help him set them up. One is used, and one is fresh out of the tin.
Problem I am having is; after flashing the system with a USB I just get a black screen. My TV is telling me that it's getting a signal but there is no image at all.
I've tried openPLI and vix. Both the newest and older versions of the before mentioned images. Using the standard procedure of turning
the system off, plugging in the USB(with the right folder structure and files). Then I turn the system back on and wait for the LED to flash
green. Remove the USB stick and restart the system.
What I find frustrating to say the least is that the same thing happens with both boxes.
I am sorry for bumping this thread. But I'm still trying to find a solution.
I removed brltty and I still get the same error. I am running Debian 6 on VMware esxi. It worked perfect until I had a power out, now it doesn't work no matter what I do. New install, my backup copy of of the VM.
The smargo readers slowly blink green with no card in, but when I put a card in there is no light at all and I keep getting:
26/07/2013 00:20:29 937C1F8 r viasat [smartreader] usb bulk write failed : ret = -7
26/07/2013 00:20:39 937DB50 r canaldigital [smartreader] usb bulk write failed : ret = -7
maybe after 15min I get:
QuoteDisplay More
26/07/2013 00:22:06 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7209 (i686-linux-gnu-ssl-libusb-pcsc)
26/07/2013 00:22:06 0 version=1.20-unstable_svn, build #7209, system=i686-linux-gnu-ssl-libusb-pcsc
26/07/2013 00:22:06 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
26/07/2013 00:22:06 0 max. logsize=10 Kb, loghistorysize=4096 bytes
26/07/2013 00:22:06 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
26/07/2013 00:22:06 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7209 (i686-linux-gnu-ssl-libusb-pcsc)
26/07/2013 00:22:06 0 version=1.20-unstable_svn, build #7209, system=i686-linux-gnu-ssl-libusb-pcsc
26/07/2013 00:22:06 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
26/07/2013 00:22:06 0 max. logsize=10 Kb, loghistorysize=4096 bytes
26/07/2013 00:22:06 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
26/07/2013 00:22:09 94360C0 c client connected to 10000 port
26/07/2013 00:22:09 94360C0 c encrypted newcamd:10000-client 127.0.0.1 granted (test1, au=on (1 reader))
26/07/2013 00:22:09 94360C0 c user test1 authenticated successfully (CCcam)
26/07/2013 00:22:09 94360C0 c AU disabled for user test1
26/07/2013 00:22:13 940FB00 c client connected to 10001 port
26/07/2013 00:22:13 940FB00 c encrypted newcamd:10001-client 127.0.0.1 granted (test3, au=on (1 reader))
26/07/2013 00:22:13 940FB00 c user test3 authenticated successfully (CCcam)
26/07/2013 00:22:13 940FB00 c AU disabled for user test3
I would love any help. :still_dreaming:
Never owned a smargo myself but this has been reported to solve the usb bulk write error by others,
Codewget remove brltty
Any errors try
Codeapt-get remove brltty
I read something about that, tried: "apt-get remove brltty" but no go. I'll try the other command when I get home.
some more from the oscam log at startup:
1/07/2013 19:18:27 0 s canaldigital [smartreader] creating thread for device 002:004
1/07/2013 19:18:27 9241288 h HTTP Server listening on port 8888
1/07/2013 19:18:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
1/07/2013 19:18:27 0 s waiting for local card init
1/07/2013 19:18:27 9242BC0 r viasat [smartreader] Using 0x82 as endpoint for smartreader hardware detection
1/07/2013 19:18:27 9242BC0 r Found smartreader device 002:005
1/07/2013 19:18:27 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7209 (i686-linux-gnu-ssl-libusb-pcsc)
1/07/2013 19:18:27 0 version=1.20-unstable_svn, build #7209, system=i686-linux-gnu-ssl-libusb-pcsc, nice=-1
1/07/2013 19:18:27 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
1/07/2013 19:18:27 0 max. logsize=10 Kb, loghistorysize=4096 bytes
1/07/2013 19:18:27 0 client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
1/07/2013 19:18:27 924B470 r canaldigital [smartreader] Using 0x82 as endpoint for smartreader hardware detection
1/07/2013 19:18:27 9242BC0 r viasat [smartreader] Reader initialized (device=002:005, detect=cd, mhz=480, cardmhz=357)
1/07/2013 19:18:27 924B470 r Found smartreader device 002:004
1/07/2013 19:18:27 924B470 r canaldigital [smartreader] Reader initialized (device=002:004, detect=cd, mhz=357, cardmhz=357)
1/07/2013 19:18:28 9242BC0 r viasat [smartreader] card detected
1/07/2013 19:18:28 924B470 r canaldigital [smartreader] card detected
1/07/2013 19:18:39 924B470 r canaldigital [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:18:39 9242BC0 r viasat [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:18:49 924B470 r canaldigital [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:18:49 9242BC0 r viasat [smartreader] usb bulk write failed : ret = -7I had a server running fine with oscam/CCcam on debian 6. The power went out and when it got back up again
it was not working. Same setting, same everything. even the same usb id-numbers 002:004, 002:005 etc etc.
I had an image of the working server. Applied it but got the same error.
I reinstalled everything in the same manner as I did when I got the working setup but to no avail, I still got the same error.
The error I'm getting is:
1/07/2013 18:59:58 95DF470 r canaldigital [smartreader] usb bulk write failed : ret = -7
1/07/2013 18:59:59 95D6A70 r viasat [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:00:08 95DF470 r canaldigital [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:00:09 95D6A70 r viasat [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:00:18 95DF470 r canaldigital [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:00:19 95D6A70 r viasat [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:00:28 95DF470 r canaldigital [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:00:29 95D6A70 r viasat [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:00:38 95DF470 r canaldigital [smartreader] usb bulk write failed : ret = -7
1/07/2013 19:00:39 95D6A70 r viasat [smartreader] usb bulk write failed : ret = -7My oscam/CCcam config is as follows:
[global]
nice = -1
WaitForCards = 1
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw
maclogsize = 10000
preferlocalcards =
ClientTimeout =
CacheDelay =
saveinithistory =
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@093E:000000;10001@0b00:000000
keepalive = 1
oscam.server:
[reader]
label = viasat
protocol = smartreader
device = 002:002
boxid = <MYBOXID>
caid = 093E
ident = 093E:000000
ecmwhitelist = 093E:88,84,AA,A6,68,98
detect = cd
mhz = 480
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = canaldigital
protocol = smartreader
device = 002:003
caid = 0b00
ident = 0b00:000000
EMMCache = 1,1,0
group = 2
oscam.user:
[account]
user = test1
pwd = test2
group = 1
caid = 093E
ident = 093E:000000
au = viasat
[account]
user = test3
pwd = test4
caid = 0b00
ident = 0b00:000000
group = 2
au = canaldigital
Server CCcam.cfg:
N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 10001 test3 test4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: dreambox passwordI'm sorry, I must have overlooked what he added to newcamd. thanks very much!
humm it says that only one of the users is online. does that have some thing to do with the first user using port 10000 and the other using poty 10001.
I tried adding:
[newcamd]
key = 0102030405060708091011121314
port = 10001@0b00:000000
keepalive = 1
to get ccam to connect to the second user, but then the first user wouldn't connect either :(
and I'm still only getting 7 entitlements on the canaldigital card :\ is that right?
it's getting there
0xb7202060 r 2 canaldigital ON OFF 127.0.0.1 0 smartreader 19.12.12 18:33:06 00:09:12 0000:0000 no data 00:09:12 CARDOK (7 entitlements)
it's getting there, but I'm only getting 7 entitlements
and how would should my F: line and C: line for CCcam server and CCcam.conf look on my dreambox?
[global]
nice = -1
WaitForCards = 1
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw
maclogsize = 10000
preferlocalcards =
ClientTimeout =
CacheDelay =
saveinithistory =
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@096C:000000
[account]
user = test1
pwd = test2
group = 1
is there anything wrong with my F: and C: line?
I have two smargo readers in my debian server. One Viasat card and a Canal Digital card
I get Entitlements on my viasat card but not on my CD card. From oscam web interface:
0xb7201480 r 1 viasat ON OFF 127.0.0.1 0 smartreader 19.12.12 17:49:56 00:00:42 0000:0000 no data 00:00:42 CARDOK (107 entitlements)
none form the Canal Digital card. my oscam.server file:
[reader]
label = viasat
protocol = smartreader
device = 002:002
boxid = <MYBOXID>
ecmwhitelist = 093E:88,84,AA,A6,68,98
detect = cd
mhz = 480
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-g = 1
[reader]
label = canaldigital
protocol = smartreader
device = 002:003
caid = 0b00
ident = 0b00:000000
EMMCache = 1,1,0
group = 1
My second problem.
oscam is connected to CCcam on my server(from cccam web interface):
127.0.0.1:10000 |00d 00:10:24|newcamd| | | 1 |
in my CCcam.conf file I added a F: line: F: username password
on my dreambox CCcam.conf I added a C: line C: <local IP> 12000 username password
in cccam web interface it says the client is connected:
|nisroc |<local IP to dreambox> |00d 01:01:23|00d 01:01:23|0 (0)|0 (0)|2.3.0 | |
but I get no image or audio
help please. any one who do IU will love long time ;)
can't restart oscam, the command oscam does not work
here is my oscam.conf file:
[reader]
label = viasat
protocol = SmartReader
detect = CD
group = 1
emmcache = 1, 1, 2
ecmcache = 1
device = 002:002
boxid =
ecmwhitelist = 093E:88,84,AA,A6,68,98
blockemm-g = 1
[reader]
label = canaldigital
protocol = SmartReader
detect = CD
group = 1
emmcache = 1, 1, 2
ecmcache = 1
device = 001:005
I got another problem, cant figure out how to restart oscam, and every time I reboot the device number keeps changing
and is Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC the right device? I expected it to say smargo?
I have used the install script for Debian 6 and for the readers I've used the configs from "How to Install Ubuntu Server 10.04 + Oscam + Smargo Reader"
when I hit lsusb i get:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 001 Device 004: ID 050d:0261 Belkin Components
Bus 001 Device 002: ID 0951:1607 Kingston Technology DataTraveler 100
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
when I run "tail -f /var/log/oscam.log" I get:
18/12/2012 00:24:40 9722DE8 r canaldigital [smartreader] Cannot open device: 002:001
18/12/2012 00:25:40 9722DE8 r canaldigital [smartreader] Using 0x82 as endpoint for smartreader hardware detection
18/12/2012 00:25:40 9722DE8 r Smartreader device 002:001 not found
18/12/2012 00:25:40 9722DE8 r canaldigital [smartreader] Cannot open device: 002:001
18/12/2012 00:26:40 9722DE8 r canaldigital [smartreader] Using 0x82 as endpoint for smartreader hardware detection
I'd be thankful for any help or links that may help me.
