Hi dear all,
Like i say in the title (and with all your help i finally setuped my linux oscam/cccam 2.1.3).
Whats next ? Now need help for the next steps ?
THX.
Hi dear all,
Like i say in the title (and with all your help i finally setuped my linux oscam/cccam 2.1.3).
Whats next ? Now need help for the next steps ?
THX.
what card reader have you got? and what local card? the next step could be a number of things i guess.
have you set up a dns? have you installed your reader? have you forwarded ports on your router?
omnikey install > http://linuxsat-support.com/li…key-readers-linux-pc.html
smargo > http://linuxsat-support.com/li…-linux-receivers-pcs.html
port fowarding > http://linuxsat-support.com/ca…1726-port-forwarding.html
dyndns > http://linuxsat-support.com/ca…dyndns-account-video.html
theres lots more info, if you get stuck at any point i am sure you will get the help you require. was only a couple of months ago i was at the same stage.
hi brendanj9554,
I already setuped the port forwarding and no-ip address.
I have a smartgo cardreader with JSC Sport card.
When i finished to install the reader what the next step ?
THX
set up your CCcam.cfg make a C:line for a client (ie:box in the bedroom) and put an F:line in the CCcam.cfg
ok thanks man...i will read this tonight...but i cannot configure a cccam.cfg on my box because is a DM500S from the manufacturer...how can i configure my box ?
Thx.
QuoteI have a smartgo cardreader with JSC Sport card.
Do you have oscam configured for JSC card yet ? If not tell us whether your JSC card is viaccess or irdet0 ?
QuoteDM500S from the manufacturer...how can i configure my box ?
Use Dreambox Control Center to make an FTP connection to the DM500, there should be a CCcam.cfg file in /var/etc you can edit, if not send this file HERE - http://linuxsat-support.com/cc…cam-cfg-file-newbies.html..
Hi Master G,
i didn't know that i need to configure oscam for my JSC Card. My card is an Viaccess. Need to configure each time each card on oscam side ? how to do this ?
Thanks for the link to configure cccam.cfg.
If i understand cccam.cfg file is to configure the client and oscam.conf to configure the server, true ?
THX
Here are working configs for Al Jazeera Sport Viaccess 4.0 using Oscam + CCcam 2.1.3..
Place the oscam config files in /usr/local/etc/..
http://linuxsat-support.com/li…rver-using-cs-studio.html
Run command lsusb on server to get the ouput for smargo..
You should see something like this;
Bus [COLOR='#FF0000']001[/COLOR] Device [COLOR='#FF0000']003[/COLOR]: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Change the [reader] in oscam.server for smargo like below;
QuoteIf i understand cccam.cfg file is to configure the client and oscam.conf to configure the server, true ?
If you are running CCcam on the client machine then yes edit the CCcam.cfg..
Don’t have an account yet? Register yourself now and be a part of our community!