yes mate works on my vu duo, oscam services?, dont know mate
DM800HD SE but cannot get oscam to read local sly card
-
- Videoguard2 Cards OSCam
- junger
- Thread is marked as Resolved.
-
-
Readers 0/1
2BCFF4B0 r 1 ***uk 0 0 127.0.0.1 0 internal 03.01.13 14:26:57 00:00:51 0000:0000 no data 00:00:51 OFFcould this be the problem in the reader?
-
when i look at the reader in 8888, i get this
1251 r 2 ***uk 0 0 127.0.0.1 0 intern 03.01.13 16:09:45 00:02:47 0000:0000 00:02:47 ERROR
wuold appreciate any suggestions
-
I have tried 2 images and get the same card error read, anyone available for teamview please, a little frustrated and going round in circles
-
i see in ur server u dnt have any mhz or cardmhz, try adding them, this works in mind but u can try both @ 357
[reader]
label = lower_card ... wat ever u want
protocol = internal
device = /dev/sci0
caid = 0963
boxid =
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
lb_weight = 101 -
Thanks, I will try that mate
-
ok, when i reset the oscam/cccam the web info status shows the reader as "needinit" but within 10 secs it goes to "error" an the progress log shows
2013/01/04 1:08:25 3471 r02 [videoguard2-reader] no boxID available
2013/01/04 1:08:25 3471 r02 card system not supported
2013/01/04 1:08:25 3471 r02 Normal mode failed, reverting to Deprecated Mode
2013/01/04 1:08:26 3471 r02 ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2013/01/04 1:08:27 3471 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/01/04 1:08:28 3471 r02 [videoguard2-reader] type: VideoGuard B***B - New
2013/01/04 1:08:31 3471 r02 card system not supported
2013/01/04 1:08:31 3471 r02 card initializing error
2013/01/04 1:08:31 3466 s init for all local cards done
2013/01/04 1:08:31 3466 s anti cascading disabled
2013/01/04 1:08:31 3466 s dvbapi: dvbapi disabled
2013/01/04 1:08:45 3466 s client(1) connect from 127.0.0.1 (pid=3499, pipfd=14)
2013/01/04 1:08:45 3499 c01 account 'ó¹ðÌ ðž…ÐÇüD29RŸÀVž¤À(Ä' not found!
2013/01/04 1:08:45 3499 c01 cccam: 2554 failed errno: 0 (Success)
2013/01/04 1:08:45 3499 c01 anonymous disconnected from 127.0.0.1
2013/01/04 1:08:55 3466 s client(1) connect from 127.0.0.1 (pid=3508, pipfd=14)
2013/01/04 1:08:55 3508 c01 account 'o¯ùV*àÓpÅøå”^ýìBSÿ(Ääök$ÞÕþ]§mì!µN' not found!
2013/01/04 1:08:55 3508 c01 cccam: 2554 failed errno: 0 (Success)
2013/01/04 1:08:55 3508 c01 anonymous disconnected from 127.0.0.1
2013/01/04 1:09:05 3466 s client(1) connect from 127.0.0.1 (pid=3514, pipfd=14)
2013/01/04 1:09:05 3514 c01 account '!™(*¢Éè' not found!
2013/01/04 1:09:05 3514 c01 cccam: 2554 failed errno: 0 (Success)
2013/01/04 1:09:05 3514 c01 anonymous disconnected from 127.0.0.1
2013/01/04 1:09:15 3466 s client(1) connect from 127.0.0.1 (pid=3521, pipfd=14)
2013/01/04 1:09:15 3521 c01 account '…"ï³³ Áwf,ìžÁ*6¬¸ö9ÿ(Ääök$ÞÕþ]§mì!µN' not found!
2013/01/04 1:09:15 3521 c01 cccam: 2554 failed errno: 0 (Success)
2013/01/04 1:09:15 3521 c01 anonymous disconnected from 127.0.0.1 -
put your box key in, some oscams need it and try mhz =368 cardmhz = 368 or 357
and make sure u reboot box not just restart cam -
one more thing, in ur softcam menu, do u have oscam+cccam on same line, on my 1 their is green dot beside the one i select and besde the green dop it has oscam+cccam, is that wat urs has
-
Yes dreamuser, for reference the oscam/cccam is selected/downloaded in tpanel and configuired in tpanel-softcam, there is no entry in blue-button for the image entry, (I assume this works as cccam handles a cline that way.
When I web info (ip 8888)the card read is correct for 10 secs after softcam restarted then show error.
I have selected different ports in cccam and oscam config due to having my own vu+ultimo, but I port forwarded the additional ports in the router to match.
I might have to take my box down and advise our members that I share with that my box will be down for the test period.Lastly, I will tell my son he needs to join our forum for his advice or my head will be shredded with frustration. lol, thanks for your help mate
hope this helps you to help me, thanks, junger -
the card errors at the time the log records
2013/01/04 19:23:38 1905 r02 card system not supported
2013/01/04 19:23:38 1905 r02 card initializing errorany ideas please
-
it could be anything, in the user settings does it say, status online, i would install a diff oscam until it shows in the softcam manager like the cccam, i had problems when mine didnt, u need to find the right one for the image,some will show and some wont or if some1 on here that has a dm800se and oscam installed, cud make a backup of their image, u would be sorted all done for ya lol, i dnt no if a normal dm800 images does a se, i dnt fink so
dreamuser -
hi,junger just put image ready for *** uk . find it in the forum.
-
I have done. the oscam is off the forum mate, will carry on see whats wrong
-
but u need it to show in ur softcam manager, try another oscam from ts panel or try rami image that has oscam installed already
-
4 images, 6 oscams later, is there a image that is sly freindly with oscam built in, I have looked around the dm800se 84b section but i do not see one, could someone point to a valid link please
-
Emulator packs for images.
just go in this section and find the oscam/ccam uk resdy for your image
-
sorted, thanks to you all, downloaded digitalworldz se 1.1.nfi image, downloaded and setup CCcam_213 and Oscam6611 in Setup-Softcam/CI and modified Config's and Reader through Dcc, opened the ports on the router to correspond with the ports required on the config's and hey presto.!!!!!, all working, now then, I want to make a backup, can I backup to a usb stick?, should I, Can I post the image and config to the forum?
thanks
junger -
Well done junger ¬ Glad to see you got things sorted out @ Last.
Use ts panel to create a backup of your settings/image
:rikjaard1:
-
i use GP2 Flashbackup, it will save it to ur harddrive or usb stick u have setup for ur dm800, then use a dcc program and goto hdd folder and backup folder and u will see ur file their and just copy to ur computer or laptop, then u can use in any dm800se
-
master G
Set the Label from UK OSCam to Videoguard2 Cards OSCam
OSCam Support Forum
Configs, discussion, downloads and guides for OSCam Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!