Posts by junger

  • mgcamd on D800se not clearing

    Hi, I have tried to put Mgcamd on my SE box, (cause a peer sent me a CWS share), I now want to attempt to try Mgcamd, the image is openpli 4, It shows the peer detail on the screen, but does not clear the picture. anyone had it or know what the problem is, I have spent a few hours reading on-site, following the tuts, masterG's setups and then trying to resolve vut alas without success. appreciate any help

  • Is virmin restricting the comms to the dreambox

    463e0c75.jpg


    Hi
    My mate changed his vermin super hub (to the latest hub I think), since then he has not been able to share & he has lost his sly channels, I have had a look and found.
    1) when I network test his box it fails on ip address & dns,
    2) I brought the box to our house and plugged it in, it worked fine
    3) I checked his router firewall and that's off
    4) we went on his virmin media account and think the websafe stuff is off.
    5) I contacted him by 'Teamviewer' but as you can see by the picture above that I cannot see the files on the dreambox, but I can look at the DM front Screen if I put in the ip of the dm directly,


    Is virmin restricting the comms to the dreambox and Is there something else I am missing ?


    Thanks
    Junger

  • wireless driver for DM800SE

    I have no wireless driver for DM800SE, so need a driver, had a look around but cannot find one, did a download on the box but got green screen. anyone point the way to the correct driver please?

  • Vu Ultimo does not clear local card or shares.

    Vu Ultimo with oscam-1.20-unstable_svn-r11232 does not clear local card or shares on the Ultimo. however my Oscam users are active and my card and my peers shares are clearing for them, If I restart Enigma it still does not clear, but if I pull the mains plug and restart the Ultimo it starts clearing again, there is no time-frame, but it can run for a day or so before it stops clearing again then I have to restart the Ultimo again. Helpppppp

  • Cacheex setup not working (What am I doing wrong) ?

    I have 2 boxes. an Vu Ultimo & a Dm800hd clone. I have tried to setup Cacheex between the two boxes. here are the entries, I am using the same port as the card and the port given to my peers in the clines.


    The Ultimo that has the local card has the following 'Oscam Config' entry


    [global]
    serverip = 192########
    logfile = stdout;/tmp/oscam.log
    nice = -1
    maxlogsize = 256
    preferlocalcards = 1
    resolvegethostbyname = 1


    [cache]
    csp_port = #####
    csp_serverip = 192.#######
    [newcamd]
    port = #####@0963:000000
    key = 0102030405060708091011121314
    keepalive = 1


    [cccam]
    port = ######
    nodeid = C0866BDA104D151C
    version = 2.1.2
    reshare = 1


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    request_mode = 1
    user = linuxsatsupport
    read_sdt = 1
    write_sdt_prov = 1
    boxtype = dreambox


    [webif]
    httpport = #####
    httpuser = root
    httppwd = ########
    httprefresh = 10
    httpallowed = 0.0.0.0-255.255.255.255



    '
    Oscam User


    [account]
    label = OSCAM-A-CACHE
    user = cachex
    pwd = dm800hd
    group = 1
    cacheex = 1 # or 2/3
    cccmaxhops = -1



    The Dm800hd has the following entry in the' Oscam Config'


    [global]
    disablelog = 1
    disableuserfile = 1
    usrfileflag = 0
    maxlogsize = 10
    preferlocalcards = 1
    saveinithistory = 1
    lb_mode = 0
    unlock_parental = 1


    [webif]
    httpport = 8081
    httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1


    [dvbapi]
    enabled = 1
    pmt_mode = 6
    au = 1
    user = dvbapiau
    boxtype = dreambox


    Oscam Server


    [reader]
    protocol = cccam
    device = oscamserverB.com,######
    user = cache
    password = dm800hd
    cacheex = 1 # or 2/3
    group = 1


    I hope that I have erased the port address info.
    any help appreciated

  • Think I understand Cachex (eventually)

    Think I understand Cachex, but can someone tell me.


    1) In 'Oscam User' Is there one cacheex entry per user with unique password
    2) In the Oscam Server, is it the same as User (one entry per Reader with unique password)
    3) Once the peer is setup as Cachex, can the normal 'Oscam User & Reader' be removed.


    Can I play (will it work) with Cachex between two boxes within my home (internal ip addresses at home)


    Or am I talking Bo###cks


    Thank' s in advance for all your replies

  • Sly White Card with Bt Sports entitlements

    It was paired in a HD box, I bought an sd box of flea bay and had it assigned to that box, It worked in the SD Box but not in the Vu Ultimo box, when I look at the oscam it says paired, ok,give me a little time, I have disconnected the box as I am on hols for a week tomorrow, will post when I return, thanks, junger

  • Qbox

    Hi, is it true that a sly qbox stb does not have a card, If that is the case is that box anti share ?
    thanks
    junger

  • sky card stopped working

    Hi Mate, I got a 6month 1/2 price and 6months normal charge, I have an SD Box but my white card is showng burn marks around the chip. however, you have a point about renewing my sub. I want to do another 12 months deal.

  • sky card stopped working


    How (if possible) can I make sure I get a red card? for my new subscription, ?, or is it that you get what your given ?, thanks junger

  • Oscam for BT Card

    Hi, I have loaded the oscam files, The oscam sees the entitlements but does not clear the channel. I have enclosed the oscam status. I have not put it in my ultimo, but my second box vu+duo, so it does not screw up my peers



    any help appreciated