Hi Everyone
Just fit a M Tuner in my dm800 clone powered the box up got a error message on the front led panel and no signal on my tele do i need to flash the box or have i nacked the box up.
Many thanks
There are 8 replies in this Thread which was already clicked 1,801 times. The last Post () by hamborambo.
Hi Everyone
Just fit a M Tuner in my dm800 clone powered the box up got a error message on the front led panel and no signal on my tele do i need to flash the box or have i nacked the box up.
Many thanks
Try resetting factory defaults and if not then try a reflash.
You wont have knackered the box, what is the error message?
I imagine reflashing will cure it but you may need to use the null modem cable method.
Thanks lads
Just tried to reflash and i've got this message Box is in Serial HTTP Mode what does that mean
connect with dreamup and you will be able to reflash.
Just a quick update everything sorted, i will check to see whether the new tuner has sorted the freezing problems on some hd channels.
Once again many thanks to everyone.
So are you still getting freezing on some?
Just curious because this info will help others decide if its woth upgrading the tuner.
Sorry Ten what i should have said is going to check now the M tuner is fitted had it on ssp 1 hd all night with no freezing problems also tried discovery hd and that worked fine so all problems sorted.
Sorry if I confused everyone.
What tuner did you have in the box before? I think these are only compatible with the rev L motherboards that had the rev l3 tuners because of the increased power consumption.
Don’t have an account yet? Register yourself now and be a part of our community!