omnikey help needed plz on ubuntu 12.04

psxchipper · Jan 19th 2013

hi all i'll try and explain the best i can

i installed the ubuntu 12.04 with oscam alls good and working and omnikey both lights showing on reader and worked

then after a few days rebooted and the omnikey left light shows when booting up and then goes off but before both stayed on? i dont think the omnikey is faulty as hardly used it

cant understand why before booting and rebooting the left light comes on omnikey then well fully booted up light goes off

plz help on this as i want the reader too work so both lights work and reads card cant understand light comes on when booting up goes off when fully booted up

thanks for anyone that can help and im not that clued up on linux but will understand it i need too change something

**musogeek** · Jan 19th 2013

Introductions
please pass by the above link and post an info first. Not really too much info to go on, so can you post some logs from Oscam so we can see what is happening?

psxchipper · Jan 19th 2013

the omnikey is a 3121 reader seems like its flashing the left green light not both and not showing the entitlements the card id is correct i use in a dreambox but i think its the oscam thats not right??

Code

0x2221110 




r




1




reader=1




ON




OFF




127.0.0.1




0




pcsc










0000:0000







no data




00:02:11




OFF (no entitlements)
















0x2227b70 




r




2




omnikey




ON




OFF




127.0.0.1




0




pcsc










0000:0000







no data




00:02:11




OFF (no entitlements)










Clients 1/1 (0 with ECM within last 15 seconds)






















c




1




cccam




ON










ON




127.0.0.1




55365




newcamd (CCcam)




19.01.13 22:42:06




00:02:09




0000:0000










00:02:09




OK










2013/01/19 22:42:04 0 s log_list_thread thread started 
2013/01/19 22:42:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7149 (x86_64-linux-gnu) 
2013/01/19 22:42:04 0 s version=1.20-unstable_svn, build #7149, system=x86_64-linux-gnu, nice=-1 
2013/01/19 22:42:04 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1 
2013/01/19 22:42:04 0 s max. logsize=10 Kb, loghistorysize=4096 bytes 
2013/01/19 22:42:04 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms 
2013/01/19 22:42:04 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory) 
2013/01/19 22:42:04 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 
2013/01/19 22:42:04 0 s signal handling initialized (type=sysv) 
2013/01/19 22:42:04 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded 
2013/01/19 22:42:04 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded 
2013/01/19 22:42:04 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded 
2013/01/19 22:42:04 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded 
2013/01/19 22:42:04 0 s can't open whitelist file /usr/local/etc/oscam.whitelist
 2013/01/19 22:42:04 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex 
2013/01/19 22:42:04 0 s Starting listener 0 
2013/01/19 22:42:04 0 s monitor: disabled 
2013/01/19 22:42:04 0 s Starting listener 0 
2013/01/19 22:42:04 0 s camd35: disabled 
2013/01/19 22:42:04 0 s Starting listener 0 
2013/01/19 22:42:04 0 s cs378x: disabled 
2013/01/19 22:42:04 0 s Starting listener 0 
2013/01/19 22:42:04 0 s newcamd: initialized (fd=4, port=10000, crypted) 
2013/01/19 22:42:04 0 s -> CAID: 0963 PROVID: 000000 
2013/01/19 22:42:04 0 s Starting listener 0 
2013/01/19 22:42:04 0 s pandora: disabled 
2013/01/19 22:42:04 0 s Starting listener 0 
2013/01/19 22:42:04 0 s csp: disabled 
2013/01/19 22:42:04 0 s Starting listener 0 
2013/01/19 22:42:04 0 s radegast: disabled 
2013/01/19 22:42:04 0 s starting thread http 
2013/01/19 22:42:04 0 s http thread started 
2013/01/19 22:42:04 0 s starting thread reader check 
2013/01/19 22:42:04 0 s reader check thread started 
2013/01/19 22:42:04 0 s starting thread check 
2013/01/19 22:42:04 0 s check thread started 
2013/01/19 22:42:04 0 s reader=1 [pcsc] creating thread for device 000:000 




hope this helps

Display More

Code

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1




[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.0.0-192.168.254.254
httprefresh = 15




protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;







[reader]
label                         = reader=1
protocol                      = pcsc
device                        = 000:000
caid                          = 0963
boxid                         = xxxxxxxx
detect                        = cd
mhz                           = 600
cardmhz                       = 600
blockemm-unknown              = 1
blockemm-g                    = 1




[reader]
label                         = omnikey
protocol                      = pcsc
device                        = 000:000
caid                          = 0963
boxid                         = xxxxxxxx
detect                        = cd
mhz                           = 600
cardmhz                       = 600
blockemm-unknown              = 1
blockemm-g                    = 1







[account]
user                          = cccam
pwd                           = cccam
group                         = 1,2
monlevel                      = 0
au                            = 1
caid                          = 0963

Display More

plus in winscp everytime i try too edit anything in oscam i get permission denied??

psxchipper · Jan 19th 2013

protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000

i noticed the ports 10000 when i tried too open in webif said port was allready in use?

not too sure about all if honest but im willing too learn if some can help me thanks

**domski** · Jan 24th 2013

protocol = pcsc
device = 000:000

This should be -
protocol = pcsc
device = 0

philthy · Feb 7th 2013

If it's a USB omnikey, try this:

protocol = pcsc
device = /dev/ttyUSB0

**domski** · Feb 8th 2013

It is definately a 0(zero) for me, second omnikey is a 1.
You have installed the drivers and done install instructions here

Also I had a time getting a decent oscam pcsc binary to work as meant too, got a great one now, email me I can share

**domski** · Feb 8th 2013

When its running properly you will see them listed as 0, 1 etc

**thatfellow** · Feb 8th 2013

2x Omnikey Readers for SlyUK & updating entitlements

Code

[reader]
label                         = slyuk1
protocol                      = pcsc
device                        = 0
caid                          = 0963
ecmwhitelist                  = 0963:16,27,2B,2E,34,36,3B,3D,3E,41,42,44,45,47,4B,4E,4F,50,51,53,54,56,57,58,59,5D,5E,5F,60,61,62,63,64,65,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,82,84,85,89,8B,8F,99,9B,9C,9F,A2,A8,AC,AD,AE,B0,B4,B7
detect                        = cd
ident                         = 0963:000000
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-g                    = 1
saveemm-u                     = 1
saveemm-s                     = 1
lb_weight                     = 300




[reader]
label                         = slyuk2
protocol                      = pcsc
device                        = 1
caid                          = 0963
ecmwhitelist                  = 0963:16,27,2B,2E,34,36,3B,3D,3E,41,42,44,45,47,4B,4E,4F,50,51,53,54,56,57,58,59,5D,5E,5F,60,61,62,63,64,65,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,82,84,85,89,8B,8F,99,9B,9C,9F,A2,A8,AC,AD,AE,B0,B4,B7
detect                        = cd
ident                         = 0963:000000
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-g                    = 1
saveemm-u                     = 1
saveemm-s                     = 1
lb_weight                     = 300

Display More

Quote

plus in winscp everytime i try too edit anything in oscam i get permission denied??

Can I ask what tut you followed? It sounds like you have not Enabled root User..

Quote

protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000

i noticed the ports 10000 when i tried too open in webif said port was allready in use?

not too sure about all if honest but im willing too learn if some can help me thanks

What do you mean when you say you tried to open the port in webif??

You can change that port number to anything you want as long as you forward that port in your router..

omnikey help needed plz on ubuntu 12.04

Participate now!

Share

Tags