need help on Vu+ solo2 with cccam jsc card

There are 20 replies in this Thread which was already clicked 3,780 times. The last Post () by rami.

    i have a Vu+ Solo2 and a valid jsc card i*****


    please ..tell me how to make it run on my Vu in order to view it and share it also ...


    I've tried so many methods including edtiting the cfg's (cccam, scam and oscam ) with no luck !!! so please if any body have the clue :beated:

    • Official Post
    Quote from neoxxro

    i have a Vu+ Solo2 and a valid jsc card i*****


    please ..tell me how to make it run on my Vu in order to view it and share it also ...


    I've tried so many methods including edtiting the cfg's (cccam, scam and oscam ) with no luck !!! so please if any body have the clue :beated:


    You need to add the camkey & camdata lines to your cfg for this card, look here.


    [h=1]Ultimo won't detect my al Jazeera sports card[/h]

    Thank you very much for your quick reply ..


    i did the exactly the same as eigh8plus did..but no luck


    i used the cccam 2.3.0 with the cfg posted by eigh8plus , in cccam info i got : card reader /dev/sci0 no or unknown card inserted . card reader /dev/sci1 no or unknown card inserted


    am on Vu+ solo2 Bh and my card is brand new I***** jsc valid and activated .. verified.


    i can't figure out what am i doing wrong!!

    the card is activated by the seller, and i verified that from aljazeera sport self service.


    my cfg :


    CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
    CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    TRY ALL CHIDS : /dev/sci0





    p.s i didn't add any c: or f: line for the momment to ensure it works from reader

    • Official Post


    Is that the only thing you have in your configs?
    If so add this.


    Code
    SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000
    • Official Post
    Quote from neoxxro

    added and still the same ..nothing changed..


    You still havent posted your configs so we can see if anything is wrong. Try running the card in scam to get it clearing, this will also activate it if its not already.
    No configs are needed just have only scam running and tune to a channel the card opens.


    [h=1]Scam 3:59 for OE 2.0[/h]

    [h=2]Emulator packs for images[/h]

    thank you again for your kindness ... i think the problem is from my card .. coz i did exactly what you have said with the scam .. and nothing cleared..
    i checked my card again on jsc self service again and gave me an error.. something happened with my card .. i`ll try to contact the seller maybe he can figure out .. many thanks again !

    • Official Post
    Quote from neoxxro

    thank you again for your kindness ... i think the problem is from my card .. coz i did exactly what you have said with the scam .. and nothing cleared..
    i checked my card again on jsc self service again and gave me an error.. something happened with my card .. i`ll try to contact the seller maybe he can figure out .. many thanks again !


    Leave it running in scam overnight buddy, sometimes it can take a while for the activation signal to be received.

    hi,budy if really you want watch footy tonigth and if you send me by pm your number card and systheme iderto or viacees i can check for you i am dealer in spain .

    Quote

    n cccam info i got : card reader /dev/sci0 no or unknown card inserted . card reader /dev/sci1 no or unknown card inserted


    have you got it inserted correctly ?? right way up I mean..
    just a thought..

    I have the same problem. The configuration recommended for Ird***2 cards, I managed to get it to work with my smart USB card reader. However, when I use the same exact configuration in Solo2, I get error:


    ERROR in IO_Serial_Read (errno=22 Invalid argument)


    I believe that something is wrong in communication between card and card reader. I tried setting different frequency:
    Mhz = 600
    cardmhz = 600
    But no luck.


    Maybe, someone who used Ird***2 cards successfully with Solo2 could guide us.
    Any help is appreciated.


    ST70

    ok , i just as the question is theres 2/3 pepols have prob with this card , if them card from the same online shop. and i go check tonigth with my vu uno and vusolo2 2 card one viacess and one i....to and i let you no


    the only way i found to get it work on solo2 is to plug an i***** module (ci)... that worked at least for me

    Ok just make test with viacess card jsc work fine with vu uno ccam 213 and vusolo 2 chips down segond card reader.


    Now i go to test iderto card ok

    OK TEST I.D.ERTO JSC ON VU UNO INTERNAL CARD READER SCI1 CCAM 213 ALL OK THERE IS THE CONFIG ONLY IN CCAM CFG ATTRIBUT 644


    AND VUSOLO2


    CAMKEY : /dev/sci1 00 00 00 00 00 00 00 00
    CAMDATA : /dev/sci1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    TRY ALL CHIDS : /dev/sci1
    SMARTCARD CLOCK FREQUENCY: /dev/sci1 6800000


    OK

    Just for your info i runing in both reciever image bh 2.0.0. Build 15/02/2013

CCcam Support Forum

Configs, discussion, downloads and guides for CCcam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login