vix 3.0v2 keeps crashing on changing channel on laptop, still cant get epg to work
XML
<?xml version="1.0" encoding="utf-8"?>
<opendreambox>
<enigma2>
<crashdate>Thu Jan 1 01:02:20 1970</crashdate>
<compiledate>May 6 2012</compiledate>
<contactemail>crashlog</contactemail>
<!-- Please email this crashlog to above address -->
<skin>skin.xml</skin>
<sourcedate>May 6 2012</sourcedate>
<branch>vuplus_experimental</branch>
<rev></rev>
<version></version>
</enigma2>
<image>
<dreamboxmodel>dm500hd</dreamboxmodel>
<kernelcmdline>bmem=112M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
version=1000201205071337
comment=Vuplus
target=9
creator=OpenEmbedded <oe@vuplus.com>
url=http://www.vuplus.com/
catalog=http://www.vuplus.com/
]]>
</imageversion>
<imageissue>
<![CDATA[
Vuplus 2.2.0 + BlackHole 1.7.4.0 %h
]]>
</imageissue>
</image>
<software>
<enigma2software>
<!-- Cannot allocate memory -->
</enigma2software>
<dreamboxsoftware>
<!-- Cannot allocate memory -->
</dreamboxsoftware>
<gstreamersoftware>
<!-- Cannot allocate memory -->
</gstreamersoftware>
</software>
<crashlogs>
<enigma2crashlog>
<![CDATA[
limiting
action -> EPGSelectActions blue
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
action -> OkCancelActions ok
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
action -> OkCancelActions ok
nr_read 197 nr_write 1
sum 198 prev_sum 198
hdd IDLE!
[IDLE] 21.423251 120 False
action -> EPGSelectActions red
playing 1:0:19:1B1E:802:2:11A0000:0:0:0:
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
[eDVBCAService] channel 0x1d43e08 running
[eDVBLocalTimerHandler] channel 0x1d43e08 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x1d43e08 running
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:1B1E:802:2:11A0000:0:0:0:
no version filtering
0012: 4e 1b 1e 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (091d), and 1 audio stream(s) (091e), and the pcr pid is 091d, and the text pid is 157f
allocate demux
disable teletext subtitles
decoder state: play, vpid=2333, apid=2334
DMX_SET_PES_FILTER(0x91d) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x91e) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x91d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x157f) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
not pauseable.
[AutoRes] service changed
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evFramerateChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[AutoRes] determineContent
action -> EPGSelectActions red
[SEC] set dynamic current limiting
timeout 0012!
action -> EPGSelectActions info
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
action -> OkCancelActions cancel
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
nr_read 197 nr_write 1
sum 198 prev_sum 198
hdd IDLE!
[IDLE] 33.433324 120 False
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
allocating new converter!
reused converter!
reused converter!
reused converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
[SEC] set dynamic current limiting
action -> OkCancelActions ok
okbuttonClick
Looking for embedded skin
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
timeout 0000!
PATready
DVB service failed to tune - error 2
RemovePopup, id = ZapError
AddPopup, id = ZapError
no ancillary data in audio stream... abort radiotext pes parser
action -> SetupActions ok
Looking for embedded skin
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
nr_read 197 nr_write 1
sum 198 prev_sum 198
hdd IDLE!
[IDLE] 45.423221 120 False
[SEC] set dynamic current limiting
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
action -> SetupActions ok
setEntries 1
Looking for embedded skin
getInfo
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
action -> SatellitesEditorActions exit
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
nr_read 197 nr_write 1
sum 198 prev_sum 198
hdd IDLE!
[IDLE] 57.423239 120 False
timeout 0014!
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler] RTC time is 23:23:23
[eDVBLocalTimerHandler] Receiver time is 01:01:54
[eDVBLocalTimerHandler] RTC to Receiver time difference is 1458088711 seconds
[eDVBLocalTimerHandler] set Linux Time to RTC Time
[EPGC] time updated.. start EPG Mainloop
before: 1
after: 1
action -> SetupActions ok
Looking for embedded skin
action -> WizardActions back
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[EPGC] 225889 events read from /media/hdd/epg.dat
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 11080230 bytes for cache used
[EPGC] next update in 2 sec
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
action -> SetupActions ok
Looking for embedded skin
[EPGC] start caching events(125)
nr_read 296 nr_write 7
sum 303 prev_sum 198
hdd was accessed since previous check!
[IDLE] 0 120 False
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
[EPGC] abort non avail nownext reading
action -> SetupActions ok
[EPGC] abort non avail schedule reading
Looking for embedded skin
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
ePixmap::setPixmapFromFile: loadPNG failed
send: 'GET [url]http://www.tunisia-dreambox.info/dreambox-e2-addons/dreambox-e2-updates/Settings/SGTFlipFlop/lista.xml[/url] HTTP/1.1\r\nHost: [url]www.tunisia-dreambox.info\r\nAccept-Encoding:[/url] identity\r\n\r\n'
reply: 'HTTP/1.1 200 OK\r\n'
header: Date: Sun, 10 Feb 2013 20:04:20 GMT
header: Server: Apache
header: Last-Modified: Tue, 27 Nov 2012 08:27:28 GMT
header: Accept-Ranges: bytes
header: Content-Length: 558
header: Connection: close
header: Content-Type: application/xml
Looking for embedded skin
allocating new converter!
warning, skin is missing element key_blue in <class 'Plugins.Extensions.TSpanel.setloader.TSSL_Settingsshow'>
OURSTATE: lost lock, trying to retune
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10847000 Pol 1 SR 23000000 INV 2 FEC 6 orbpos 282 system 1 modulation 1 pilot 2, rolloff 3
tuning to 1097 mhz
OURSTATE: tuning
[SEC] set static current limiting
set sequence pos 3
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f0
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] set dynamic current limiting
action -> ColorActions yellow
Looking for embedded skin
ePixmap::setPixmapFromFile: loadPNG failed
send: 'GET /dreambox-e2-addons/dreambox-e2-updates/Settings/SGTFlipFlop/SGTFlipFlop-ENiGMA2-23.11.11-multi.tar.bz2 HTTP/1.1\r\nHost: [url]www.tunisia-dreambox.info\r\nAccept-Encoding:[/url] identity\r\n\r\n'
reply: 'HTTP/1.1 200 OK\r\n'
header: Date: Sun, 10 Feb 2013 20:04:25 GMT
header: Server: Apache
header: Last-Modified: Tue, 27 Nov 2012 08:27:35 GMT
header: Accept-Ranges: bytes
header: Content-Length: 233748
header: Connection: close
header: Content-Type: application/x-tar
[Errno 2] No such file or directory: '/tmp/sl_settings_tmp/lamedb'
[Errno 2] No such file or directory: '/tmp/sl_settings_tmp/bouquets.tv'
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Plugins/Extensions/TSpanel/setloader.py", line 569, in __start
File "/usr/lib/enigma2/python/Plugins/Extensions/TSpanel/setloader.py", line 131, in download
File "/usr/lib/enigma2/python/Plugins/Extensions/TSpanel/setloader.py", line 815, in apply
File "/usr/lib/enigma2/python/Plugins/Extensions/TSpanel/setloader.py", line 774, in copyBouquets
OSError: [Errno 2] No such file or directory: '/etc/enigma2/userbouquet.___.tv'
(PyObject_CallObject(<bound method TSSL_ActionBox.__start of <class 'Plugins.Extensions.TSpanel.setloader.TSSL_ActionBox'>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
resolve: resolve ${sysconfdir}/enigma2/settings
resolve: -> /etc/enigma2/settings
]]>
</enigma2crashlog>
<pythonMD5sum>
<!-- Cannot allocate memory -->
</pythonMD5sum>
</crashlogs>
</opendreambox>
Display More