help ......mhz ??

mr_hhhalia01 · Mar 21st 2013

hi please I have problem with (specified in reader-> mhz) I am using a nemesis dm800sim2 emulator oscam smargo 2.6 + / cccam......card nds3 caid095b/0945 ...... but I can not run the card please hope someone can help me thank you very much

Code

21:57:33        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build #8115 (mipsel-unknown-linux-gnu), compiled by Gianni8127
12 57:33        0 s version=1.20-unstable_svn, build #8115, system=mipsel-unknown-linux-gnu, nice=-1
12 57:33        0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
12 57:33        0 s max. logsize=100 Kb, loghistorysize=4096 bytes
12 57:33        0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
12 57:33        0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
12 57:33        0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
12 57:33        0 s signal handling initialized (type=sysv)
12 57:33        0 s 902 service-id's loaded in 111ms
12 57:33        0 s 58 tier-id's loaded
12 57:33        0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.provid" (errno=2 No such file or directory)
12 57:33        0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.guess" (errno=2 No such file or directory)
12 57:33        0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory)
12 57:33        0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.whitelist" (errno=2 No such file or directory)
12 57:33        0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.cacheex" (errno=2 No
 such file or directory)
12 57:33        0 s Starting listener 0
12 57:33        0 s monitor: initialized (fd=4, port=988)
12 57:33        0 s Starting listener 0
12 57:33        0 s camd35: disabled
12 57:33        0 s Starting listener 0
12 57:33        0 s cs378x: disabled
12 57:33        0 s Starting listener 0
12 57:33        0 s newcamd: initialized (fd=5, port=12000, crypted)
12 57:33        0 s -> CAID: 0905 PROVID: 000000
12 57:33        0 s Starting listener 0
12 57:33        0 s pandora: disabled
12 57:33        0 s Starting listener 0
12 57:33        0 s csp: disabled
12 57:33        0 s Starting listener 0
12 57:33        0 s radegast: disabled
12 57:33        0 s starting thread http
12 57:33        0 s http thread started
12 57:33        0 s starting thread reader check
12 57:33        0 s reader check thread started
12 57:33        0 s starting thread check
12 57:33        0 s check thread started
12 57:33        0 s ***mexico [mouse] creating thread for device /dev/ttyUSB0
12 57:33        0 s loadbalancer: can't read from file /tmp/.oscam/stat
12 57:33        0 s waiting for local card init
12 57:33   5B7E68 h HTTP Server couldn't bind on port 20002 (errno=125 Address already in use). Not starting HTTP!
12 5 7:34   5D4A40 r ***mexico [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)




21 57:34   5D4A40 r ***mexico [mouse] card detected




21 57:37   5D4A40 r ***mexico [mouse] ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
21 57:37   5D4A40 r ***mexico [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
21 57:37   5D4A40 r ***mexico [mouse] Setting baudrate to 38400 bps
21 57:37   5D4A40 r ***mexico [mouse] Calculated work ETU is 26.05 us
21 57:37   5D4A40 r ***mexico [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)




21 57:41   5D4A40 r ***mexico [mouse] card system not supported
21 57:41   5D4A40 r ***mexico [mouse] Normal mode failed, reverting to Deprecated Mode




21 57:43   5D4A40 r ***mexico [mouse] ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
21 57:43   5D4A40 r ***mexico [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
21 57:43   5D4A40 r ***mexico [mouse] Calculated work ETU is 104.20 us
21 57:43   5D4A40 r ***mexico [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)




21 57:47   5D4A40 r ***mexico [mouse] card system not supported
21 57:47   5D4A40 r ***mexico [mouse] card initializing error




21 57:48        0 s init for all local cards done
21 57:48        0 s anti cascading disabled
21 57:48   5D6E98 c plain dvbapi-client granted (dvbapi, au=auto (1 reader))
21 57:48   5D6E98 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api:

Display More

**iiggii** · Mar 21st 2013

12 57:33 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.provid" (errno=2 No such file or directory)
12 57:33 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.guess" (errno=2 No such file or directory)
12 57:33 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.ird" (errno=2 No such file or directory)
12 57:33 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.whitelist" (errno=2 No such file or directory)
12 57:33 0 s ERROR: Cannot open file "/var/tuxbox/config/oscam.cacheex

atribute 755 ???????
protocol = smartreader

**musogeek** · Mar 21st 2013

mr_hhhalia01 - please follow the forum rules and post an intro;
Introductions
Thanks.

mr_hhhalia01 · Mar 21st 2013

sorry musiogeek these were not my intentions

**master G** · Mar 21st 2013

Quote

***mexico [mouse] card system not supported

Is your card s ky mexico ? Had a look on the oscam wiki and don`t see a working configuration for your card, are you sure its supported by oscam ?

Quote

build #8115 (mipsel-unknown-linux-gnu), compiled by Gianni8127

Does this version have smargo / libusb support ? You might want to try this version oscam-svn8559-mips-tuxbox-webif-libusb-Distribution..

We will need to see your oscam configs as well to understand the log better..

mr_hhhalia01 · Mar 21st 2013

Thanks ok good here conf

Code

[global]
logfile             = stdout;usr/log/oscam.log
#disablemail         = 0
nice                = -1
maxlogsize          = 100
preferlocalcards    = 1
#mailfile            = /usr/log/oscam.mail




[monitor]
port                = 988
nocrypt             = 127.0.0.1
aulow               = 1
monlevel            = 4
hideclient_to       = 10
appendchaninfo      = 1




[dvbapi]
enabled             = 1
au                  = 1
request_mode        = 1
user                = dvbapi
boxtype             = dreambox




[newcamd]
port                = 12000@095B:000000
key                 = 0102030405060708091011121314
keepalive           = 1




[webif]
httpport            = 20002
httpuser            = 
httppwd             = 
httpcss             = 
httptpl             = 
httpscript          = 
httprefresh         = 10
httpallowed         = 192.168.1.82,192.168.1.1-192.168.1.100
httpdyndns          = 
aulow               = 1
hideclient_to       = 10
appendchaninfo      = 1







[reader]
enable   = 1
Label    = 095b
protocol = mouse 
Detect   = CD
device = /dev/ttyUSB0
Ident    = 095B:000000
group    = 1
#cardmhz  = 357
#mhz      = 357
CAID     = 0905
BoxID    = XXXXXXXX
EMMCache = 1,1,15
#Deprecated Mode = 0







[account]
user       = dvbapi
group      = 1
au         = 1
caid       = 0905,095B,0945
ident      = 095B:000000,000000;0945:000000;0905:000000
keepalive  = 1







[account]
user       = dummy
pwd        = dummy
group      = 1
uniq       = 1
caid       = 095B
ident      = 095B:000000
au         = 1
keepalive  = 1

Display More

Please help my thanks very much

**master G** · Mar 21st 2013

Quote

I am using a nemesis dm800sim2 emulator oscam smargo 2.6 + / cccam

Are you using oscam alone with DVBapi or Oscam + CCcam with newcamd ? You have configs for both, but you need to use one or the other..

mr_hhhalia01 · Mar 21st 2013

I'm using it both now I only put dvbapi sigue same .. What stran because I have two and a card caid 0905 and all is well with this config and another caid 095B: 000000 Y 0945:000000 but this mistake atra card all right .... any advice? thanks

**master G** · Mar 21st 2013

Try both these configs, zap on a few premium channels then show us the log..

oscam alone

Code

###oscam.conf###




[global]
logfile             = stdout;usr/log/oscam.log
nice                = -1
maxlogsize          = 100
preferlocalcards    = 1
#mailfile            = /usr/log/oscam.mail




[monitor]
port                = 988
nocrypt             = 127.0.0.1
aulow               = 1
monlevel            = 4
hideclient_to       = 10
appendchaninfo      = 1




[dvbapi]
enabled             = 1
au                  = 1
request_mode        = 1
user                = dvbapi
boxtype             = dreambox




[webif]
httpport            = 8888
httprefresh         = 15
httpallowed         = 192.168.1.82,192.168.1.1-192.168.1.100
httpdyndns          = 
aulow               = 1
hideclient_to       = 10
appendchaninfo      = 1




####oscam.server####




[reader]
enable   = 1
Label    = mexico
protocol = mouse 
Detect   = CD
device = /dev/ttyUSB0
Ident    = 095B:000000;0945:000000;0905:000000
group    = 1
CAID     = 0905,095B,0945
EMMCache = 1,1,15




###oscam.user###




[account]
user       = dvbapi
group      = 1
au         = 1
keepalive  = 1




###oscam.dvbapi###




P: 095B:000000
P: 0945:000000
P: 0905:000000

Display More

Oscam + CCcam 2.1.3

Code

###oscam.conf###




[global]
logfile             = stdout;usr/log/oscam.log
nice                = -1
maxlogsize          = 100
preferlocalcards    = 1







[monitor]
port                = 988
nocrypt             = 127.0.0.1
aulow               = 1
monlevel            = 4
hideclient_to       = 10
appendchaninfo      = 1




[webif]
httpport            = 8888
httprefresh         = 15
httpallowed         = 192.168.1.82,192.168.1.1-192.168.1.100
httpdyndns          = 
aulow               = 1
hideclient_to       = 10
appendchaninfo      = 1




[newcamd]
port                = 10000@095B:000000;0945:000000;0905:000000
key                 = 0102030405060708091011121314
keepalive           = 1




####oscam.server####




[reader]
enable   = 1
Label    = mexico
protocol = mouse 
Detect   = CD
device = /dev/ttyUSB0
Ident    = 095B:000000;0945:000000;0905:000000
group    = 1
CAID     = 0905,095B,0945
EMMCache = 1,1,15




###oscam.user###




[account]
user       = dummy
pwd        = dummy
group      = 1
keepalive  = 1
au = mexico




###CCcam.cfg###




N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

Display More

mr_hhhalia01 · Mar 21st 2013

Hello thanks very much some.....
12:51:06 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8560 (mipsel-unknown-linux-gnu-libusb)
12:51:06 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1744
12:51:06 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
12:51:06 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
12:51:06 0 s signal handling initialized
12:51:06 0 s 902 service-id's loaded in 55ms
12:51:06 0 s 58 tier-id's loaded
12:51:06 0 s monitor: initialized (fd=4, port=988)
12:51:06 0 s newcamd: initialized (fd=5, port=10000)
12:51:06 0 s -> CAID: 095B PROVID: 000000
12:51:06 0 s -> CAID: 0945 PROVID: 000000
12:51:06 0 s -> CAID: 0905 PROVID: 000000
12:51:06 0 s ***Mexico [mouse] creating thread for device /dev/ttyUSB0
12:51:06 0 s loadbalancer: can't read from file /tmp/.oscam/stat
12:51:06 0 s waiting for local card init

12:51:06 520FB8 h webif: decompressed 52462 bytes back into 151752 bytes
12:51:06 520FB8 h HTTP Server listening on port 8888
12:51:06 51F820 r ***Mexico [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

12:51:07 51F820 r ***Mexico [mouse] card detected

12:51:08 51F820 r ***Mexico [mouse] ATR: 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80 00 00 3F FF 13 25 02
12:51:08 51F820 r ***Mexico [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
12:51:08 51F820 r ***Mexico [mouse] Setting baudrate to 38400 bps
12:51:08 51F820 r ***Mexico [mouse] Calculated work ETU is 26.05 us
12:51:08 51F820 r ***Mexico [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)

12:51:12 51F820 r ***Mexico [mouse] card system not supported
12:51:12 51F820 r ***Mexico [mouse] Normal mode failed, reverting to Deprecated Mode

12:51:14 51F820 r ***Mexico [mouse] ATR: 3F FF 13 25 02 50 80 3F FF 13 25 02 50 80 0F 54 B0 03 FF FF 4A 50 80
12:51:14 51F820 r ***Mexico [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
12:51:14 51F820 r ***Mexico [mouse] Calculated work ETU is 104.20 us
12:51:14 51F820 r ***Mexico [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)

12:51:15 51F820 r ***Mexico [mouse] card system not supported
12:51:15 51F820 r ***Mexico [mouse] card initializing error

nano · Mar 21st 2013

Doesn't look like the card is supported. From what i have found just by quickly skimming the internet only the P3 cards seem to be read at the moment.

Do you know which version your card is. If it is a P3 card then it can be read in native cccam as well.

mr_hhhalia01 · Mar 22nd 2013

hello thank you very much indeed is a p 5 ... and if p3 runs itself with CCcam and Oscam .......... some suggestions? regards

nano · Mar 22nd 2013

Don't think the P5 can be read. I have looked and i haven't found any information regarding it being read. To be honest its unlikely you will get any information here anyway as its mostly a European forum. Its unlikely there will be any members here that would be able to help you.

Nano

help ......mhz ??

OSCam Support Forum

Participate now!

Share

Similar Threads

How to Install Oscam on Windows PC

AFN’s switch to HD

PurE2 new lease of life for old DM800HD SE and DM500HD

Compile Oscam-emu for gx chip

VU+ Solo 4K OpenATV 6.3 Full Backup by Christos82

Tags