downloading new software

satdude23 · Apr 30th 2013

HI All
Can you tell me how to put new software into my vu+duo as ive not done this before

Thanks

**master G** · Apr 30th 2013

Quote from satdude23

HI All
Can you tell me how to put new software into my vu+duo as ive not done this before

Thanks

Do you mean install plugins or flash a new image?
Telling us which image you are using would also make this alot easier to answer.

**amosp** · Apr 30th 2013

go here Forum Gateway - Powered by DnP Firewall

satdude23 · Apr 30th 2013

HI TEN BELOW
My image at the moment is 1.0.0 I want to flash a new image

Thanks

pheonix · Apr 30th 2013

Very simple.

Download the image of your choice and extract the vuplus folder copy this folder and all it's contents to the root of a formatted ( FAT32 ) USB stick.
place the USB stick into any of the USB ports on the receiver and power the receiver off by the power switch.
power the receiver back on and wait for the image to flash, when complete you will see instructions on the VFD on the receiver.

Now depending on the receiver you may need to press a button on the receiver to initiate the reflash ( Uno, Ultimo, Solo2 ) also for the solo and duo you may need to first update to the latest bootloader before flashing a image.

remember to backup all important files first such as cam configuration files etc.

downloading new software

Participate now!

Share

Similar Threads

MAG 250 / 254 / 322 custom firmware (MAG Software Portal)

We came back again from the depths of excellence to the image of openpli 6 latest version of the processor 7111 Truman Permira +1 ... Almighty