After you sent libcrypto.so.0.9.8, rebooted, then started in telnet - did you get the same output or something else ?
yes, i sent libcrypto.so.0.9.8 in usr/lib and confirm replace + permissions 755 > reboot device
and get same else
After you sent libcrypto.so.0.9.8, rebooted, then started in telnet - did you get the same output or something else ?
yes, i sent libcrypto.so.0.9.8 in usr/lib and confirm replace + permissions 755 > reboot device
and get same else
Hi
i have rpi4 with ubuntu server
compile oscam with this tutorial and it works
Code
apt-get update
apt-get -y install apt-utils dialog usbutils
apt-get -y install gcc g++ wget
apt-get -y install build-essential subversion libpcsclite1 libpcsclite-dev
apt-get -y install libssl-dev cmake make
apt-get -y install libusb-1.0-0-dev nano
apt-get install pcscd pcsc-tools
Then create the following symbolic link so Smartreader support is added during the compile;
Code
ln -s /usr/lib/arm-linux-gnueabihf/libusb-1.0.a /usr/local/lib/libusb-1.0.a
Get the Oscam sources;
Code
cd /usr/src
svn co http://www.streamboard.tv/svn/oscam/trunk oscam-svn
Compile Oscam (note the two dots after the 5th line are there because they need to be).
Code
cd oscam-svn
mkdir build
chmod 755 build
cd build
cmake -DHAVE_LIBUSB=1 -DHAVE_PCSC=1 -DWEBIF=1 -DHAVE_LIBCRYPTO=1 -DWITH_SSL=1 ..
make
Make yourself a coffee - you have a bit of time and deserve one!
Now it is installed - we need to move it;
Code
cd /usr/src/oscam-svn/build
cp oscam /var/local/
and move the list_smargo tool;
Code
cd /usr/src/oscam-svn/build/utils
cp list_smargo /var/local/
They are both now in /var/local - now we need to change permissions;
Code
cd /var/local
chmod 755 oscam
chmod 755 list_smargo
Now oscam needs to start at boot by adding it to rc.local, and you can edit with nano;
Code
nano /etc/rc.local
arrow down to a line just above 'exit 0' and below 'fi', and add the following;
Code
/var/local/oscam &
To save, exit with 'CTRL' and 'x' - select 'y' and 'enter'.
Oscam will now run at boot.
To get it to restart daily at 5.45 am and to free memory every hour, edit the crontab file;
Code
nano /etc/crontab
add the following two new lines;
Code
05 * * * * root echo 3 > /proc/sys/vm/drop_caches
45 05 * * * root /sbin/reboot
----------------------------------------------------------------
install simplebuild with this select the emu patch and compile it I create two oscam files
1 cd /opt/
2 svn co https://github.com/gorgone/s3_releases.git/trunk/ s3
3 cd s3
4 chmod 777 s3
5 ./s3 menu
put the oscam-emu-patch in / opt / s3 / support / patches
oscam-svn11578-ubuntu-webif-dvbapi 1.2mb
oscam-svn11578-ubuntu-webif-dvbapi.debug 4.3 mb
I renamed the other oscam to osam-old and this oscam-svn11578-ubuntu-webif-dvbapi 1.2mb to oscam but it doesn't work I don't know how to start it
the old oscam boots me with / var / local / oscam &
Hello, I'm having trouble compiling oscam, I do the whole process and when I go to the s3 / suport / binaries directory the folder is empty, there is no bin.
I follow this process below:
1 cd /opt/
2 svn co https://github.com/gorgone/s3_releases.git s3
3 cd s3
4 chmod 777 s3
5 ./s3 menu
look here I´m not sure
/var/shares/linux/oscam
O que outras pessoas estão dizendo
look here I´m not sure
/var/shares/linux/oscam
Thanks for the feedback, but there is no linux directory in / var/share/
Compile new, in Filebase are newest oscam binary you can use this.
look here
/usr/local/etc
/usr/local/bin
You did not understand, when I send compile oscam, the bin that should appear in s3 / suport / binaries, simply the folder is empty.
I know where the bin and configuration files go.
Thanks, Everything works!
<img src="https://www.linuxsat-support.com/cms/attachment/150201-cattura-png/?thumbnail=1" class="woltlabAttachment" data-attachment-id="150201" id="wcfImgAttachment1">Hello guys
I followed the guide to the letter
i have a vps with ubuntu 20.04
i renamed the file to oscam and placed it in the / usr / local / bin folder
giving 755 permissions to oscam
my configuration files i put them in usr / local / etc
the problem is that it seems that the oscam does not start or that it is not suitable
the ecm etc. everything remains at 0 as per the attached image
can you give me advice on how to solve?
thank you
the problem<img src="https://www.linuxsat-support.com/cms/attachment/150198-cattura-png/?thumbnail=1" class="woltlabAttachment" data-attachment-id="150198" id="wcfImgAttachment0">
Display More
Dear all!
Om using debian based OMV operating system. In my case "svn checkout https://github.com/gorgone/s3_releases.git/trunk s3" command is not working. I tried with wget -O command but without any sucess..
svn is not supported command... ?
Does anybody installed simplebuild on OMV?
Thank you!
B
Thank You!
But it isn't work....
nice tutorial, can anyone create thread for compile oscam for enigma1,enigma2,arm rasbarry devices
Oscam for enigma 1 is already available here.
Display MoreDear all!
Om using debian based OMV operating system. In my case "svn checkout https://github.com/gorgone/s3_releases.git/trunk s3" command is not working. I tried with wget -O command but without any sucess..
svn is not supported command... ?
Does anybody installed simplebuild on OMV?
Thank you!
B
Hi.
You have to write here what error message you see in the terminal / shell.
How do I know where the problem occurred ? Uhm ...
Do you have SVN / GIT support installed on Linux at all ?
Section 5 [W.I.P]: Adding toolchains & compiling oscam for other devices
not found this
Display MoreDisplay MoreDear all!
Om using debian based OMV operating system. In my case "svn checkout https://github.com/gorgone/s3_releases.git/trunk s3" command is not working. I tried with wget -O command but without any sucess..
svn is not supported command... ?
Does anybody installed simplebuild on OMV?
Thank you!
B
Hi.
You have to write here what error message you see in the terminal / shell.
How do I know where the problem occurred ? Uhm ...
Do you have SVN / GIT support installed on Linux at all ?
Hello!
After some months I tried again to install simplebuild in My Open media vault.
I tried with the following command.
git clone https://github.com/gorgone/s3_releases.git
And it looks like ' git ' is unkonw command.
Here zou can see my sceenshot ( sorry it in hungarian, but it means git command not found)
'root@H-Networks:~# git clone https://github.com/gorgone/s3_releases.git
-bash: git: parancs nem található'
How to enable, install Git /svn support?
Thank You
Balázs
Don’t have an account yet? Register yourself now and be a part of our community!