help with new server debian

There are 26 replies in this Thread which was already clicked 2,532 times. The last Post () by rami.

  • hello, afther 2 years runing small server on dm , i start on new server linux on mini pc alls ok test my card ,



    now , i want do it propely, for transfert alls my c,f,and n lines i have from dm to the server mini linux .



    any help, is welcome. tkyou


  • Option 1
    If your old setup was cccam only And your new setup is oscam only, you can use this little app to convert all your cccam shares to oscam accounts & readers


    http://linuxsat-support.com/os…erter-latest-version.html


    Option 2
    If your new server is oscam/cccam, just move all the flines, clines & nlines to your new cccam.cfg..



    Which ever option you use above, The most important thing is that you use the same cccam & newcamd port numbers that you used in you DM, otherwise you will have to ask all your peers/clients to change their lines.


    After this you just update your dns to point to your server rather than your DM




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

  • tkyou so if i am rigth,


    copy and past ccamcfg in to the ccam cfg


    and copy and past n line i exchange with my peers to oscam user


    and put the same port i use on oscam/ccam i use on dm .

  • Yep, thats it m8, very simple process.. You might find that it takes a few hours for all your clients / peers to work 100% depending on what security measures they are using.. i.e. locking lines to dns / ip etc..




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

  • ok i get it rong , ccam not working lines, oscam ok but not n lines ccam in oscam ok i think i need teamvieuwer help but is sunday and i dont want to ask help today my server is runin on dm ok

  • hi i have another question way i have 2 ccam one normal and one in oscam tkyou

  • Quote

    hi i have another question way i have 2 ccam one normal and one in oscam tkyou


    I don't really understand the question m8, but if you are asking can you run and connect 2 separate servers,


    the first with cccam/oscam
    & the second with cccam only


    Yes, that is no problem, It is happening every day (probably with a lot of your current peers using cccam only & some oscam only) All the different cams share the popular protocols..




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

  • ok my dm oscam/ccam is runing good


    in oscam user only n lines user and pass i give to my friends n lines from my card .


    in ccam cfg


    f lines and the n lines my peers give me in exchange the n lines i give them.


    so i wants just copy and past the same user and pass in oscam cfg .


    and the same in ccam cfg . is thats the rigth.


    i dont want make c line in oscam user .

  • [account]
    user = lolo
    pwd = lolo
    group = 63
    monlevel = 0
    au = digital
    caid = 1810


    [reader]
    label = Digital_N3
    description =
    enable = 1
    protocol = mouse
    device = /dev/ttyUSB0
    key =
    password =
    pincode = none
    gbox_max_distance = 2
    gbox_max_ecm_send = 3
    gbox_reshare = 0
    gbox_group =
    gbox_my_password =
    readnano =
    services =
    resetcycle = 0
    smargopatch = 0
    sc8in1_dtrrts_patch = 0
    fallback = 0
    cacheex = 0
    cacheex_maxhop = 0
    cacheex_ecm_filter =
    cacheex_allow_request = 1
    cacheex_drop_csp = 0
    caid = 1810
    atr =
    boxid =
    boxkey =
    rsakey =
    ins7e =
    ins7e11 =
    fix9993 = 0
    force_i***** = 0
    ecmnotfoundlimit = 0
    ecmwhitelist =
    ecmheaderwhitelist =
    detect = cd
    nagra_read = 0
    mhz = 500
    cardmhz = 368
    ident = 1810:004001,004101,000000
    chid =
    class =
    aeskeys =
    group = 63
    emmcache = 1,3,2
    blockemm-unknown = 0
    blockemm-u = 0
    blockemm-s = 0
    blockemm-g = 0
    saveemm-unknown = 0
    saveemm-u = 0
    saveemm-s = 0
    saveemm-g = 0
    blockemm-bylen =
    lb_weight = 100
    savenano =
    blocknano =
    dropbadcws = 0
    disablecrccws = 0
    use_gpio = 0
    cccreshare = -1
    ccchop = 0
    emmreassembly = 1
    deprecated = 0
    audisabled = 0
    auprovid =
    ndsversion = 0
    ratelimitecm = 0
    ratelimitseconds = 0
    ecmunique = 0
    srvidholdseconds = 0
    cooldown = 0,0


    [global]
    disablelog = 1
    loghistorysize = 4096
    serverip = 192.168.1.21
    logfile = /var/log/ipc/OScam.log
    logduplicatelines = 0
    pidfile =
    disableuserfile = 1
    disablemail = 1
    usrfileflag = 0
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    bindwait = 120
    netprio = 0
    sleep = 0
    unlockparental = 0
    nice = 99
    maxlogsize = 2480
    waitforcards = 1
    waitforcards_extra_delay = 500
    preferlocalcards = 1
    readerrestartseconds = 5
    dropdups = 0
    block_same_ip = 1
    block_same_name = 1
    usrfile =
    mailfile =
    cwlogdir =
    emmlogdir =
    lb_mode = 0
    lb_save = 0
    lb_nbest_readers = 1
    lb_nfb_readers = 1
    lb_min_ecmcount = 5
    lb_max_ecmcount = 500
    lb_reopen_seconds = 900
    lb_retrylimit = 800
    lb_stat_cleanup = 336
    lb_reopen_mode = 0
    lb_max_readers = 0
    lb_auto_betatunnel = 1
    lb_auto_betatunnel_mode = 0
    lb_auto_betatunnel_prefer_beta= 50
    lb_savepath =
    lb_retrylimits =
    lb_nbest_percaid =
    lb_noproviderforcaid =
    lb_auto_timeout = 0
    lb_auto_timeout_p = 30
    lb_auto_timeout_t = 300
    double_check_caid =
    ecmfmt =
    resolvegethostbyname = 0
    failbantime = 0
    failbancount = 0
    suppresscmd08 = 0
    double_check = 0


    [newcamd]
    port = 25035@1810:000000,004001,004101
    serverip = 192.168.1.21
    allowed =
    key = 0102030405060708091011121314
    keepalive = 1
    mgclient = 0


    [cccam]
    port = 25000
    serverip = 192.168.1.21
    nodeid = F0EF50CB103E157C
    version = 2.3.0
    reshare = 1
    reshare_mode = 0
    ignorereshare = 0
    forward_origin_card = 0
    stealth = 0
    updateinterval = 240
    minimizecards = 0
    keepconnected = 1
    recv_timeout = 2000


    [webif]
    httpport = 8889
    serverip = 0.0.0.0
    httpuser = oscam
    httppwd = oscam
    httpcss =
    httpjscript =
    httpscript =
    httptpl =
    httphelplang = en
    httpcert =
    http_prepend_embedded_css = 0
    httprefresh = 15
    httphideidleclients = 0
    httphidetype =
    httpshowpicons = 0
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
    httpreadonly = 0
    httpsavefullcfg = 1
    httpforcesslv3 = 0
    httpdyndns =
    aulow = 30
    hideclient_to = 15

  • So you have gone for the oscam only setup on your new server
    Can you also post the log from oscam after oscam restart..


    It seems like all the default oscam settings are listed in the oscam config files.. It can make it a bit messy for you to use or troubleshoot. Most of these lines are not needed in the configs..


    After you post the oscam logs, we can start cleaning up your configs..




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

  • sorry , i am really new on this wats is the log


    if you can go with teanvieuwer you are welcome if you can

  • Quote

    sorry , i am really new on this wats is the log


    if you can go with teanvieuwer you are welcome if you can


    I would have a small bit of time for TeamViewer but you would first need to do the following:


    Set Static IP Address on your local network for your Server (Or have the username/password for access to your router config "192.168.1.1")..
    Take note of all your IP address's & username/passwords for server/webif/DM & have them available when I connect..


    Also m8 so I can get everything I need ready, can you tell me what setup you are planning to use on your server?


    Is it oscam only or cccam/oscam? Looking at your configs, it looks like oscam only but as mentioned a few posts back, if you used cccam/oscam you would just need to copy lines from DM cccam.cfg to server cccam.cfg & change ports & dns




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

  • hi ,ok my ip is static i was going with oscam/ccam but if oscam allone is better ok
    yhe only think is somethimg rong not card reader matchin

  • OK m8, PM me your TeamViewer number & password..


    I still don't have much info on your setup.


    Are you using USB Cardreader in server or are you still using your DM to read the card?
    You have a serial (mouse) reader setup in your configs but could you just confirm the cardreader you are using


    I think you would be better off using oscam/cccam on your server..
    In time when you get used to the PC Server setup you can migrate your settings over to an oscam only setup if you wish...
    At the moment It might be too many problems to tackle at once..


    There WILL be downtime, I will have to stop server in DM to test new setup in Server etc..




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

  • tkyou for your big help ,and the times you spend to help me alls ok .


    i send you pm . tkyou so mutch

  • No problem rami, just be aware that we have only set it up to work.. It is not yet properly configured to update your card etc.. So just test it for a while and post back with any problems..




    All your problems have been solved countless times before so try the search box before you post!!
    Please do not Request help by PM, use the main forum so Everyone can benefit from the answers.

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!