Hello all,
I am trying to setup a card server and client using oscam 1.20 (r8655). I've managed to compile it and it is reading card.
The server and client will be on different linux box in the same lan.
I'm using camd35 to communicate between oscam instances.
But I do not see any traffics on the udp port. My configuration is as follow :
Server :
oscam.conf
[global]
nice = -1
WaitForCards = 1
pidfile = /var/run/oscam.pid
logfile = stdout
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw
maxlogsize = 10000
[webif]
httpport = 7777
httpuser = axion
httppwd = axion
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.0.254
httphideidleclients = 0
httpreadonly = 0
[cs357x]
port=13477
[dvbapi]
enabled = 1
user = user1
boxtype = pc
au = 1
pmt_mode = 0
[monitor]
appendchaninfo = 1
oscam.server
[reader]
label = stream
enable = 1
protocol = smartreader
detect = cd
device = 002:001
caid = 0963
ident = 0963:000000
mhz = 357
cardmhz = 357
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
group = 1
oscam.user
[account]
user=user1
group=1
uniq=0
au=stream
caid = 0963
ident = 0963:000000
monlevel = 0
oscam.dvbapi
P:0963:000000
========================================
Client
oscam.conf
[global]
nice = -1
WaitForCards = 1
pidfile = /var/run/oscam.pid
# logfile = /var/log/oscam.log
logfile = stdout
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw
maxlogsize = 10000
[webif]
httpport = 9999
httpuser = axion
httppwd = axion
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.0.254
httphideidleclients = 0
httpreadonly = 0
[dvbapi]
enabled = 1
user = user1
boxtype = pc
au = 1
pmt_mode = 0
[monitor]
appendchaninfo = 1
oscam.server
[reader]
label = camd-client
enable = 1
protocol = camd35
device = 192.168.0.188,13477
caid = 0963
ident = 0963:000000
services = *** digital (uk)
group = 1
oscam.user
[account]
user=user1
group=1
uniq=2
au=camd-client
caid = 0963
ident = 0963:000000
monlevel = 0
oscam.dvbapi
P:0963:000000
log - camd-client [camd35] proxy initialized, server 192.168.0.188:13477
The card is successfully detected on the reader(server) side. I do not see any communication between the server and the client. Can any point me out what I've done wrong with the configurations? There is no firewall in my LAN.
Is there a way to verify the camd client is working properly?
Any help appreciated.
Cheers,
axion