hi guys ive set a dm500s up as a server im only serving two mates the thing is can the dm500s still serve in standby mode as when i turn mine into standby the clients lose channels im running commando 14.7
dm500s server disconnects clients in standby
- lambert
- Thread is marked as Resolved.
-
-
Your dm500 server will still allow clients to connect in standby, they won`t be able to connect if the server is powered off completely..
Which image, card and cams are you using ? Does this happen every time you use standby ?
-
Change image to gp and it would work even and in stand by.
-
cheers guys running commando 14.7 image s#y white card and Cccam 2.2.1 yes they lose channels every time i put into standby
-
cheers guys running commando 14.7 image s#y white card and Cccam 2.2.1 yes they lose channels every time i put into standby
That shouldn't be happening buddy, maybe you had a bad flash of the image, i would suggest trying one of the sly ready backup images from here --> DM500 Images
Backup your configs before trying to re flash a new image..
-
cheers pal ill have a look the funny thing is when i first set it up and put it into standby i did notice the red standby light aswell as the green light but now in standby its jut the red light
-
Commando is not an enigma image hence why it behaves differently to the others, i found problems using loopthrough to another receiver also where the only way i could get a signal on the second box was putting the commando image onto internet radio then all was ok. You can leave the box on 24/7 without any problems or as already suggested use an enigma image.
-
ok pal thanks very much for your help
-
ok guys ive sorted it so if anybody else is having the same problem the trick is to keep your finger on the standby button untill u get both red and green light on that way its going into standby but still serving
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!