How-to: Installing/compiling oscam on debian

Tried it a few times, eventually worked :)

Rich

following this guide will install oscam on debian your saying.. i also would like to try install oscam on debian.

yes,

just follow the guide written by master g . The script will do all the hard work for you . But you must still configure your oscam config files.

regards

t

Hi, when I type in "wget http://tiny.cc/zaUVU" it keeps saying
--2011-04-17 20:31:08-- http://tiny.cc/zaUVU
Resolving tiny.cc... 66.219.31.108
Connecting to tiny.cc|66.219.31.108|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.opendrive.com/files/6121527_k5QTq_1c02/compile.sh [following]
--2011-04-17 20:31:08-- http://www.opendrive.com/files/6121527_k5QTq_1c02/compile.sh
Resolving OpenDrive | Online Storage, Backup & Cloud Content Management... 199.255.236.62, 199.255.236.60, 199.255.236.52, ...
Connecting to www.opendrive.com|199.255.236.62|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2011-04-17 20:31:09 ERROR 404: Not Found.

And I cant to the next step. Any help guys?

that is no problem,all u have to do is download compile.sh manually from the link ,ftp to required place ,then change mode to 755.te execute it from putty with root .ope this helps

yeah i figured that out at the end. thanks anyway mate :)

Quote from gangstacoca

Hi, when I type in "wget http://tiny.cc/zaUVU" it keeps saying
--2011-04-17 20:31:08-- http://tiny.cc/zaUVU
Resolving tiny.cc... 66.219.31.108
Connecting to tiny.cc|66.219.31.108|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://www.opendrive.com/files/6121527_k5QTq_1c02/compile.sh [following]
--2011-04-17 20:31:08-- http://www.opendrive.com/files/6121527_k5QTq_1c02/compile.sh
Resolving OpenDrive | Online Storage, Backup & Cloud Content Management... 199.255.236.62, 199.255.236.60, 199.255.236.52, ...
Connecting to www.opendrive.com|199.255.236.62|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2011-04-17 20:31:09 ERROR 404: Not Found.

And I cant to the next step. Any help guys?

Display More

gangstacoca im stuck ere on same 404 error. can you give me shout... thanks

as biyi had said above , download from the link manaually then ftp over to your linux pc and do a chmod 755 to compile.sh then run the script manually as root

Quote from master G

Use putty to log onto you're server as root
then type in the following:

Code

cd /emu/script

Code

wget http://tiny.cc/zaUVU

Code

chmod 755 compile.sh

Code

./compile.sh

This will download all the needed files and libraries, compile oscam and move it to /emu/oscam.

It can happen that the source is protected with a "root" password. If this is the case, just wait 10 minutes and try again

Thanks to CC_share.

Display More

thanks masterg.... made it very str8 forward for me....

i am struggling however with adding smart reader (smargo reader) support.... how do i go about adding this functionality in?
cheers
muttsa

Ten,

in debian as long as you have compiled for smartreader support with the correct drivers you can use : -

protocol = smartreader
device = xxx:xxx ( this format xxx:xxx represents a bus and device id within debian, u can find this out by running lsusb command as root and looking at the output for your smargo )

The real advantage of running a smargo in smartreader mode is better ecm stability and generally lower ecm times. You should receive 0.070m/s on certain n$s cards.

regards

t