hi guys. i very need your help whit that server. i instaled ubuntu server oscamcccam step by step and i liked that becose is working. when i put Nline in cccam.cfg like reshare is everithing fine. but i have problem because i get Smargo cardreader and can't fined how i can make is runing. i was put caid:093E in oscam and stil nothing. any help please. or if anybody can connect to my pc whit teamwiever and help me setup my smargo and oscam for my viasat card 093e.
help me setup my smargo and oscam for my viasat card 093e.
- Tigriuz
- Thread is marked as Resolved.
-
-
SOME WHERE HAVE PROBLEM :
2013/06/26 13:37:47 1480390 r viasat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=500, cardmhz=500)
2013/06/26 13:37:47 1480390 r viasat [mouse] card detected
2013/06/26 13:37:54 1480390 r viasat [mouse] ATR: 3F 7D 11 25 02 41 B0 03 69 FF 4A 50 F0 80 00 56 54 03
2013/06/26 13:37:55 1480390 r viasat [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/06/26 13:37:57 1480390 r viasat [mouse] classD0 ins36: answer too int16
2013/06/26 13:37:57 1480390 r viasat [mouse] no boxID available
2013/06/26 13:37:57 1480390 r viasat [mouse] card system not supported
2013/06/26 13:37:57 1480390 r viasat [mouse] Normal mode failed, reverting to Deprecated Mode
2013/06/26 13:38:03 1480390 r viasat [mouse] ATR: 3F 7D 11 25 02 41 B0 03 69 FF 4A 50 F0 80 00 56 54 03
2013/06/26 13:38:04 1480390 r viasat [mouse] Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/06/26 13:38:05 1480390 r viasat [mouse] classD0 ins36: answer too int16
2013/06/26 13:38:05 1480390 r viasat [mouse] no boxID available
2013/06/26 13:38:05 1480390 r viasat [mouse] card system not supported
2013/06/26 13:38:05 1480390 r viasat [mouse] card initializing error
2013/06/26 13:38:06 0 s init for all local cards done
2013/06/26 13:38:06 0 s anti cascading disabled
2013/06/26 13:38:06 1486120 c client connected to 12402 port
2013/06/26 13:38:06 1484740 c client connected to 12402 port
2013/06/26 13:38:06 1484740 c anonymous disconnected from 127.0.0.1
2013/06/26 13:38:06 1484740 c thread 7F750B476700 ended!
2013/06/26 13:38:06 1486120 c encrypted newcamd:12402-client 127.0.0.1 granted (cccam, au=on (1 reader))
2013/06/26 13:38:06 1486120 c user cccam authenticated successfully (CCcam)
2013/06/26 13:38:06 1486120 c AU disabled for user cccam
2013/06/26 13:38:14 1486120 c cccam (093E&000000/0000/1AEA/AA:3692): rejected group (1 ms) (0/0/0/0) (no matching reader)
2013/06/26 13:40:04 1486120 c cccam (093E&000000/0000/1AEA/AA:DDD2): rejected group (1 ms) (0/0/0/0) (no matching reader) -
maybe this is the problem:-
2013/06/26 13:38:05 1480390 r viasat [mouse] no boxID available
2013/06/26 13:38:05 1480390 r viasat [mouse] card system not supported
2013/06/26 13:38:05 1480390 r viasat [mouse] card initializing error -
Quote
hi guys. i very need your help whit that server. i instaled ubuntu server oscamcccam step by step and i liked that becose is working. when i put Nline in cccam.cfg like reshare is everithing fine. but i have problem because i get Smargo cardreader and can't fined how i can make is runing. i was put caid:093E in oscam and stil nothing. any help please. or if anybody can connect to my pc whit teamwiever and help me setup my smargo and oscam for my viasat card 093e.
post your oscam config files m8, make sure to remove sensitive info..
Also, read over this post..
http://linuxsat-support.com/os…-1-3-viasat-093e-ipk.html -
maybe this is the problem:-
2013/06/26 13:38:05 1480390 r viasat [mouse] no boxID available
2013/06/26 13:38:05 1480390 r viasat [mouse] card system not supported
2013/06/26 13:38:05 1480390 r viasat [mouse] card initializing errorand how i can fix that?
-
and how i can fix that?
fixed!!! boxid is was missing .
what i need now for make newcamd line for users? cccam users i can make in cccam.cfg folder whit F: line, what about Newcamd? -
Quote
what i need now for make newcamd line for users? cccam users i can make in cccam.cfg folder whit F: line, what about Newcamd?
Is one of your peers pushing you for an NLine? If so I would not give them one..
If the Nline is for a trusted peer....
You will just have to forward your newcamd port to your server IP Address (Like you did with your cccam port).
Then create nline account in oscam.user (the same as the one you used to connect cccam by newcamd)oscam.user
Code[account] user = [COLOR='#00FF00']username[/COLOR] pwd = [COLOR='#FF0000']password[/COLOR] caid = 093E
oscam.conf
Code[newcamd] key = [COLOR='#FFA500']0102030405060708091011121314[/COLOR] port = [COLOR='#EE82EE']10000[/COLOR]@0963:000000
Thats it, now your nline for the above account will take this format.
N: your.dns.address 10000 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
-
thanks thatfellow, is work perfect, good support guys
-
i have another whit reader
2013/06/27 13:25:39 1E8DC10 r reader-1 [mouse] ERROR: Opening device 003:002 (errno=2 No such file or directory)
2013/06/27 13:25:39 1E8DC10 r reader-1 [mouse] Cannot open device: 003:002whit this cardreader:
Bus 003 Device 002: ID 08e6:34ec Gemplus
iProduct 2 GemPC Express
iSerial 0 -
master G
Moved the thread from forum USB Smart Card Reader Support to forum Linux Server Support.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!