Download the image of choice, it will come packed in an RAR format, use WINRAR to extract this.
Right click on the file and "extract here", you will see a vuplus folder, copy this folder to a FAT32 formatted usb memory stick..
Insert USB stick into the front USB port. Then on the rear of your solo press the reset button.
When the Solo starts the standby light will be RED. You should see the LED light on your USB flashing. This shows the SOLO is reading the USB stick.
When your Standby light turns green the flashing process is over and you can remove the USB stick.
Press the reset button on the rear again and the Solo will boot into the enigma2 setup process.
If the flash procedure fails to initialize use a different USB memory stick, not all memory sticks initialize the flashing process..
Use the attached version of TSPanel..
To Install > FTP to /tmp/ then paste this command into telnet and press enter..
opkg install -force-overwrite /tmp/enigma2-plugin-extensions-tspanel_7.1_mipsel.ipkCams, plugins etc can be downloaded from TSPanel..
Many thanks for that i shall do it sunday.
It seems i get glitches when i have a 300g usb powered hard drive connected..
bus powered or externally powered ?, the reason i ask is because the extra draw on the PSU when using a bus powered drive could be causing you some issues.
Well i wiped the box and telnet in and it said something about not being compatible??
If you are using the latest images try the attached file with this command instead..
opkg install -force-overwrite /tmp/enigma2-plugin-extensions-tspanel_7.2_mips32el.ipkInstall the attached file and download everything you need from there..
Don`t scan 28.2 east, download the catseye channel list from TSPanel or our addons..
You can also manual install, FTP to /tmp/ then press green button > yellow button > manually install ipk packages..
Managed to install the last ipk via manually doing it via ftp and the e=bh menu. i cannot do a channel scan as it says tuner not set up yet it wont let me do anything with it? Odd.
Set your tuner like how it is in the image below ( Menu > Setup > Service Searching > Tuner Configuration ), then download the latest catseye 28.2 channel list from our addons panel..
Or install the attached file..
Glad you got sorted buddy, i will close this thread now..
Don’t have an account yet? Register yourself now and be a part of our community!
