hi my frend i have problem with my dreambox when i write image now light green is on but not work
can u help me what to do?
dm500-s problem
- bekja001
- Thread is marked as Resolved.
-
-
Hi there bekja001!
Before you post you should always introduce yourself within the introduction forum.
Can you access your DM500 through a web browser? -
most likely needing flashed with new image with null modem cable and dream up. but that long since used my 500 i could be wrong
-
Hi there bekja001!
Before you post you should always introduce yourself within the introduction forum.
Can you access your DM500 through a web browser?
thnx for answer
not i cant acces with web browser light internet are on and power light is on but in tv not show anything -
most likely needing flashed with new image with null modem cable and dream up. but that long since used my 500 i could be wrong
how to flash now because i cant acces with internet conection with rs232 now ??
-
This is the method I use the flash my 500, and I get the IP address off my router
Flash Dreambox Without Serial Cable - Using FTP & Telnet Tutorial - DM500 - YouTube -
This is the method I use the flash my 500, and I get the IP address off my router
Flash Dreambox Without Serial Cable - Using FTP & Telnet Tutorial - DM500 - YouTubei cant because i cant accses with ftp
-
Which image did you write to the dreambox? there is a lot of rogue software out there for dm500 receivers so the box could be bricked...depending which image you used serial might not even be an option meaning it would require jtagging to recover the bootloader...try with serial tho as it mostly resurrects these boxes..
I would put the erase image on tho first...i,ll upload it shortly..
http://linuxsat-support.com/dm…ase-image.html#post134000
MK
-
i cant because i cant accses with ftp
you don not need access to intrenet use dreamup for dm500 or the oldest dreamup program and you need to connect the box to computre whit re 232 nullmodem cable only.
-
Which image did you write to the dreambox? there is a lot of rogue software out there for dm500 receivers so the box could be bricked...depending which image you used serial might not even be an option meaning it would require jtagging to recover the bootloader...try with serial tho as it mostly resurrects these boxes..
I would put the erase image on tho first...i,ll upload it shortly..
http://linuxsat-support.com/dm…ase-image.html#post134000
MK
thnx frend can u send me image to flash this model pls dm500-s
-
master G
Moved the thread from forum DM500 - DM500s Support to forum Enigma1 Support.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!