CodeHello I think using Enigma 2 on ki boxes is a waste of time. I decided to use this device in the original way. In the dtv part, I have a problem with the s2 part of the k i plus box and that is that when the motor is on usals, the dish does not move properly and chooses the wrong directions! Has anyone encountered this problem? Is there a solution to this problem?
You probably wrote the longitude and latitude IN POSITIONER SETTING wrongly, change them
Display MoreDisplay MoreDisplay MoreUninstall the openmultiboot from your uno4kse and install this openmultiboot plugin ...
send the ipk file to "tmp"
open telnet:
opkg update; opkg install /tmp/*.ipk --force-depends
restart vuuno4kse ....install the plugin on usb or hdd and configure with blue button "enable / sbin / open_multiboot and configure the last line ...
http://www.mediafire.com/file/…ultiboot_2.6_all.ipk/file
Thank you . I did install the open multiboot which you add here , but when I want to install it on usb eller HD come up a window som shows the device dose not support ,do you want to format it and prees on yes ,and it shows the `` please wait while format is in progress.`` that all I wait more than 60 minutes , nothing happend and progress dose not end.
what is wrrong? I have tried whit sveral kind of USB stick and Hard disk , the same resulttat.
format USB with this plugin and make mount with devicemanager ... after install openmiltiboot on usb
Thanks
I have allredy done those , sitill smae prblem as I wrote. I think open pli dose not work well whit this plugin as it should. I changed flash image to OBH and now works fine.
Display MoreUninstall the openmultiboot from your uno4kse and install this openmultiboot plugin ...
send the ipk file to "tmp"
open telnet:
opkg update; opkg install /tmp/*.ipk --force-depends
restart vuuno4kse ....install the plugin on usb or hdd and configure with blue button "enable / sbin / open_multiboot and configure the last line ...
http://www.mediafire.com/file/…ultiboot_2.6_all.ipk/file
Thank you . I did install the open multiboot which you add here , but when I want to install it on usb eller HD come up a window som shows the device dose not support ,do you want to format it and prees on yes ,and it shows the `` please wait while format is in progress.`` that all I wait more than 60 minutes , nothing happend and progress dose not end.
what is wrrong? I have tried whit sveral kind of USB stick and Hard disk , the same resulttat.
Helle
I have OpenPli 6.2 latast up date on flash and use the openmutiboot which is made for OpenPli image , on a VU+Uno4Kse.
I have install the latest openmultiboot plugig for OpenPli image om VU+Uno4KSE .evrey thing is ok ,but it dose not boot to any install image on multiboot.
I have tried both on USB and HarsDisk , and meny difrents imga such openvix 5, satdreamGR 5, and OpenDroid 6
when I chose an image from mutliboot to boot after restart the box start from flash not the multiboot.
I have OpenPli 6.2 latast up date on flash and use the openmutiboot which is made for OpenPli image.
any sugesstion what can be the problem.
I do install open multiboot then put image in floder /media/usb/opem-mutiboot-upload then install image and chose image from multiboot then restart vu box ,but the box strat whit flash.
any help please
Display MoreHi there is no option for channel searching on the menu on this Open Pli img.
wrong...scan option is available but blind scan not present..correct ur info plz
I did not reporrt wrong
for me there no option for searching any kind.
I did reinstall it again on a new minsd crad (format fat32)
this time there is no any menu alls!!!!!!!
can you place here a screen shout from menu , please.
Hi there is no option for channel searching on the menu on this Open Pli img.
u can not run the same line at the same time in 2 box try using only one box
I run one box at a time. Dont run both STBs simultaneously
but you should disconnet internet on one device when you using.
all the firmware inkluod the latest Oscam.
you can find it when you are on tv app press menu then select DVBS2 and klick on it you vill see the insatlling page now you have to press 111111
(six times on 1) the Oscam appiear on SCREEN .
ok on it and by pressing red butten you can edit your
C:line there . by klicking on ok it done .exit
by the way the CCCAM EMU dose not work on andriod boxes, only OSCAM is useable.
well, i am just using Notepad++ and copying/pasting codes from here to there.
it works usually fine if I am just moving things within one skin.
I tried copying a code/parameter from a different skin, but it wouldn't work in another!
that's why I asked, if there is a special way of doing it?
you need som linux tool and a lot of experianes
It works så long fine ,I did not find any bugs yet.
This italysat need to register the token key or not? Is a original italysat relase or modified?
___ Dalle mie parti si dice grazie con un klik ♡ di ringraziamento su tapatalk ��.
yes , you need to register and it is orginal.
We don't support this image........
OpenESI 4.0 Image DM8000
"OpenESI-4.0-Image"
"New Bootlogo"
k@y Color:
k@y Red: Epg or Weather Plugin
k@y Green: PluginBrowser
k@y Yellow: AudioSelection
Esi Panel v2.0
Info Plugins
Extra Addons:
EPG-Importer
IPK Installer
Cron Manager
Swap Manager
Mount Manager
_-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-_
k@y Color Long :
Red k@y long : Istant Record
Green k@y long : Media Player
Blue k@y long : Info Plugins
_-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-_
_-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-_
_-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-__-_-_-_-_
Update Settings-Default-OpenESI - 13E TNX Manutek
Update OpenWebIF
4b9309aaca41.jpg
And what changed:
Updated Enigma2 for new version OpenESI-4.0
Update:"" Python 2.7.11 -> 2.7.12""
Update:"" glibc 2.2.3 - > 2.2.4""
Update:"" Bitbake 1.29 -> 1.32""
Update:"" Compiler: GCC 5.30 -> GCC 6.20""
Update:"" Gstreamer 1.9.0 -> Gstreamer 1.11.1""
New Bootlogo-Italy-OpenESI
Weather Plugin: Weather Plugin and can download it directly from the feeds by Green / green on plugin part of Extension and the other on SystemPlugins restart Gui OpenESI ....
Added Multiboot Mut@nt HD51
THE FW NOT CONTAIN k@yS OR EMULATORS OF ANY KIND.
OpenESI IS NOT RESPONSIBLE IN ANY CASE FOR WHAT THE USERS WILL OF THESE PROGRAMS.
openesi-4.0-dm8000-20170212.nfi.zip
__________________
I am a new on this device(WETEK PLAY2)
I traied update my wetek by sd card the first time every thing was sugessfull ,then added libelELEC on SD card. evrey thing ok.
when I wanted to boot from nand ,it only comes up the wetek play 2 logo and nothig else.
now i want to do recovery and doing as guide.
and it began to update,
to show installing system update
Erase
comes up wetek logo
then began agine and agine for meny times and it dose not finish updating.
what am I doing wrong?
what should I do to get back live on My device (WETEK PLAY 2) ?
Best Regards
hi
how can I manuely load this to wetek play2? is there any how to?
Cant Find a dm7000 section so please forgive the post here. I need a DM7000s image with a working cccam,
appreciate all help
Regards
R
this imgae works fine with CCcam.
Why cant i download?
here are latest boht vesion
opendroid-5.5-dm500hdv2-20161009.nfi
opendroid-5.3-dm500hdv2-20160318.nfi
hi darius still have it on sale ,and i am genuine in the forum ,tkyou
Hi thank you , but it shows out of Stockbb587e6c.jpg
can give me the link please. PM me.
where in Europe can I buy a wetek play2 S2 tuner safe and cheapest.
I have check with https://wetek.com/ ,but they dont have it now.
I am in Sweden and only avaleble for sweden is ebuy and they dont have wetek play edther they have only wetek.
thanks
