the same as befor when i try to install any of them get error that cannot satisfy becouse of one of those dependies .
- - - Updated - - -
is ther a way that I ftp them to its floder like you said for rtmpdump file
the same as befor when i try to install any of them get error that cannot satisfy becouse of one of those dependies .
- - - Updated - - -
is ther a way that I ftp them to its floder like you said for rtmpdump file
eller i am doing wrong?
I ftp those to tmp then try to install by telenet as usuall . is it correcet och wrong?
- - - Updated - - -
ther is no such rtmpdump file in that post, where can I find it?
- - - Updated - - -
ther is no such rtmpdump file in that post, where can I find it?
- - - Updated - - -
I give up , it is not possible to install these ipks files. get error on all.
it perhaps depende on lpi imge.
I´m going to install Vti imge which read some where it works on it whit out installing other objects.
I tryed to insnstall both livestreamer_1.12.1-r0_all.ipk and livestreamersrv_0.3-r0_all (2).ipk
but get errer igen
I have OpenPli 4 on vu+solo
and tryed by this command opkg install -force-overwrite /tmp/*.ipk
and get this
Hi
I have tryed to install VU+Plugin 25.11.2015 : Albatros 3.3 to my vu+solo
in 3 ways but ist dose not installed and get error.
tryed by usb , by tele net and by DCC .
I get massage this can not install in vu+solo!!!!
even tryed erliar varsion ,but not succssesfull!!!!
all other pluging can easyly be install but not this one ,any ideia why ? and how can i install it. or if this plugin is damaged!!!!
there are 2 kind of this ic flash as below
06110.jpg
bfc764379a09db0d2aca.jpg
دو نوع از این ای سی موجود است من میتونم هر دو تاش را برات بگیرم و بفرستم
اقا مرتضی
دوست عزیز رسیور ایکسترند را نمیشه با کابل ار اس 232چتینگ کرد
شما احتیاج به یک پروگرامر مثل
اینترفیس 3 دارید که میدونم تو ایران کسی نداره و شما انزا از یک سایت ایتالیایی یاید تهیه کنید
قیمتش تفریبا انازه قیمت رسیور شماست که ارزش نداره برای شما
در سایت ایرانی پی سی ست بچه های ایرانی متونند ار نظر سخت افزاری به شما کمک کنند
یا اگر در کار کردن با کامپیوتر و خبره هستید میتوندی یک پروگرامر از سایت علی اکسپرس با قیمت 6 الی 7 دلار تهیه و با اجرای برنامه بورد کام و اتصال ری.ر با 4 رشته سیم به همان فیش هاییکه در بورد رسیور است ای سی فلش رسیور را برنامه ریزی کنید
ولی این کار احتیاج به مهارت در کار با کامپیوتر دارد.
may i explain to morteza in Farsi?
In my expriance SamSung much more better , better hardware quality longer live , better pictuer quality than LG or Sony
click right on progarme boardcom.exe and chose kompatbiltet, then in the windowos below
chose Wndoes 8.
Hi
I have a vu sölo which stay on red light and I have done exact as discraibe in how to. it connet and become green then click on flash explore I chose Samsung K9F1G08U0A then I click on Refresh ; that´s it noting hapening, and dose not go
further. I get this ererr I/O erorr occurred
how can I solve this problem?
Hi...
Can I use this image on dreambox DM800HD clone, with sim2 2.10?
Yes , you can use it:40_002:
can someone help me my F5s skybox died , so it gets a numero8 in the background very weak
how can I solve already made and error recovery of so
The SB.abs file from here in the download section fixed my problem of Booting to 093 then pausing then displaying E001.
The SB .abs I used is here:- Skybox F3 E001 Fix - Downloads - TechKings
I tried various firmwares using the RS232 method and this file sorted it in 10 minutes.....
If you only have a laptop, stick the files onto a flash drive and do it from a friends tower with RS232. It should be sorted as long its not a clone as barryboom mentions.
Google identifying the clone F5 Skybox, it is out there honest, I have seen the method and listings of IDs but it did not interest me at the time.
I am away for a week but on my return, if you still have no luck, I will hunt down that list and re-post here.
Good Luck.............
---------- Post Merged at 12:34 PM ----------
I borrowed this file from somewhere else and just tweaked it to my needs, in case of future use.....as days of messing about. this worked for me .
Hope it helps:-
==============================
Hello everyone, I recently tried to upgrade the firmware on my f5 using the usb method but when it finished flashing the box would not boot up.
It would load to 93 and come up with E001 error.
I've looked everywhere for a fix and tried so many firmwares and programs to bring my box back to life!
FINALLY after trying various .abs files and different programs , my skybox f5 is finally fully working!
The following is a step by step solution. You will need a RS232 null modem cable Female to Female D-Type 9 pin, ( Amazon £2.30 ish )
and the following downloads: which I have collected into a folder as a complete solution.
*** eromupgrade In Folder
*** firmware - Skybox F3 E001 Fix - SB.abs In Folder
Now you have whats required lets begin to fix your broken skybox f5!
01.extract the file erom_upgrade_8Mflash wherever you want and open the folder. Also extract the firmware file SB.abs ( Already DONE in Folder )
02.Open the application EromUpgrade.exe
03.Select the port your null modem cable is connected to. (if you dont know which port, open device manager on windows and scroll down to ports and here you will see something like COM1 for example)
04.Select bitrate: 115200 and Parity: Even
05.Select Operate Mode: Upgrade ( Tick ......include BootLoader )
06.Now in File or browse from the box next to the loaction box, Click browse and select the extracted file SB.abs from the Folder
07.Connect the null modem cable to your skybox, and Unplug the power supply from the F5 Box
08.Click on NEXT and you should now see ......................."Please reset target."
09.Connect the power supply to the F5 and the firmware will start downloading. If it hangs for few minutes you can cancel the download and start again. Keep trying till it gets to 100%.
10.After it is downloaded click NEXT to burn the firmware.
( basically. the first Next loads the firmware into memory and the other NEXT Burns it or Flashs it to the Skybox. )
Once this is completed, press FINISH, and the Sky Box will Auto Boot Load, hopefully to L100 you should have your skybox back to life!
Hope this helps everyone with this issue.
---------- Post Merged at 12:51 PM ----------
My F5 is now in working order and back to the condition I received it in, when new,, Except that I have changed to AJs channel list as the TP.Prog channel list....Thank You AJ... Happy flashing Gents and Good luck.....Do not give up, I was at that stage and then I fixed it, it is Fixable.......
---------- Post Merged at 12:54 PM ----------
Read More at : http://www.techkings.org/skybo…2-null-modem-cable-4.html
Display More
impossible de downloade
backup vuultimo blackhole 2.15 Satvenus&Islaremota by angelito.rar
download link
powersat-image-dm8000-3.0_11-03-2015.zip
- - - Updated - - -
Power-Sat-IMAGE DM8000 CVS_OE 2.0_ 3.0 13-03-2015
download link
Im not 100% sure about that budd , but im sure i saw something and with the issues you are having i might be right ,Have a look on streamboard , but i see you tried cccam Im sure you must NOT have spaces in the boxkey, also you should not post it online as you can be seen that way
I thought these cards were paired now im sure ive seen something on streamboard about not being able to read them ?
no canal digital is not paired ,but viasat is. you can use it on any box. I´m using it on VU+Solo and no problem.
Hi, can anyone tell me how to change the standard 6666 code to a personal one of my choice. Dont even know if this is possible? Thank you.
hi you can not change it.