Hello everyone,
I need help please in getting my cccam server to detect my card.
I have a Viaccess 4 - Al Jazeera Sport card, a Phoenix Infinity card reader and a Technomate TM-500 super receiver (patched with the latest ur-image published on 28-feb-11 running CCcam v2.1.4).
I am running Ubuntu 10.04TLS and CCcam 2.1.4 as done by this tutorial:
http://linuxsat-shares.com/lin…-ubuntu-cccam-server.html
I then copied the following files from my receiver to my server:
CCcam.prio, CCcam.channelinfo, Cccam.providers, Autoroll.key, Softcam.key, constant.cw...do I need to copy more files from the receiver to the server?
These files overwrote the ones that were already in there from the install_package I downloaded from the link above. Is that OK that I took the files from the receiver and added those or should I have left the files that came with the install script mentioned in the link above? I can copy those back if needed.
In the cccam.cfg of my technomate I only entered a C-line: C: mydomain.dyndns.org 12000 test test. Do I need to add anything else?
My dns settings I added to the router and port 12000 is open.
Then I tried to install my Phoenix Infinity card reader as done in this tutorial:
http://linuxsat-shares.com/lin…grammer-debian-cccam.html
The card reader is connected with a serial cable and usb cable. The card reader is set to phoenix mode with 6MHz in Windows XP and the lights are red and blue steady when no card is inserted (when the card is inserted the blue light flashes), and then I installed the drivers with Nftytool-1.1 in Ubuntu. The reader light is red and blue (blue is steady when no card is inserted). Blue light flashes when card is inserted.
This is my cccam.cfg:
SERVER LISTEN PORT : 12000
SERIAL READER : /dev/ttyS0 phoenix
SMARTCARD CLOCK FREQUENCY: /dev/ttyS0 6000000
CAMKEY: /dev/ttyS0 00 00 00 00 00 00 00 00
CAMDATA: /dev/ttyS0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
F: test test 0 0 0 { 0:0:1 }
Is there anything missing in my cfg?
The problem I now have is that my card cannot be detected.
This is what I checked so far:
in ubuntu :
root@xxxx:/usr/local/nftytool-1.1# ./nftytool -p phoenix -- -s
Infinity USB 1.00
Status: disabled
Polarity: smartmouse
Frequency: none
in entitlementstats :
card reader /dev/ttyS0
no or unknown card inserted
When I do the CCcam.x86 debug my viaccess card doesn't show and I get a card detect fail error message.
I also tried to start the infinity reader in nftytool by typing:
./nftytool -p phoenix -- -p phoenix -f 6.00 -e
It gives me read and write errors.
I also tried to test all other MHz frequencies by amending the cfg and then starting the reader in nftytool, but I also get the read and write error codes.
What can I do to fix tall those errors and get my server to detect my card?
Thanks so much for your help. I look forward to hearing from you.
Regards, zazolita
