I have tried many times with different usb to install blackhole-2.0.5, box starts up normally...
Can someone please help to resolve this matter...
many thanks
Help Vu+Solo2
- Firose
- Thread is marked as Resolved.
-
-
Are you sure its a genuine stb and not a clone ????
try installing a ready made backup ,for example : http://linuxsat-support.com/vu…lo2-backup-ten-below.html
following this video tutorial by mrgmx : http://linuxsat-support.com/vu…lo2-any-other-vu-lol.html
then get back to us with the results... -
When the box starts up buddy and it prompts you to press the power button on the front of the solo2, are you doing this???
-
Thanks for your rely
unable to read, page refreshing every 2 sec... -
I am using original box, not getting any prompts from receiver just starts up....
-
have you got hte usb stick formatted to fat32 before loading the image on it ?
have you tried installing using the front usb slot ??
Are you following the video tutorial steps ??
http://linuxsat-support.com/vu…lo2-any-other-vu-lol.html -
instruction followed .. no luck, anything else I could try?
-
Double check the folder you have on the usb stick is named "vuplus" then inside this is "solo2" and then inside this is the files which are used to flash the image..
The vuplus folder should be the only folder on the usb stick
-
yep.. vuplus/solo then
boot_cfe_auto.jffs2
kernel_cfe_auto.bin
root_cfe_auto.jffs2 -
If you live close to me i can help
st180qt
-
There should be 5 files in the solo2 folder buddy, you sure you have downloaded the correct version,in your post you have it as vuplus/solo...
Also not sure if you know but BH 2.0.6 was posted on the forum today for the Vu range, if your going to flash 2.0.5 you may as well flash the latest version
-
from east London long way...
-
Extract the vuplus folder from the attached file buddy and compare it to the one that you have, place it on a freshly formatted usb stick and connect that to the front usb slot on your solo2, make sure nothing else is connected by usb at the rear of the box etc, when the solo2 starts up it should detect the usb stick and prompt you to press the power button on the front to flash the image.
-
Thanks..
Let me try ... will come back shortly. -
this box has a hard drive already installed does it make any issue while installing with usb?
-
an internal hdd wont make any difference ,just make sure you have formatted hte usb stick t oFAT or FAT32 and no other usb sticks are inserted..
-
many thanks for your kind support!
all sorted, its flashing... -
Congratulations ,you are on your way !!!
But I do insist that reading is the first and foremost of learning...
you will be in total control of your box in no time:thumbsup:
-
yep.. vuplus/solo then
Solo? I guess that's where your issue was?
It helps to use the correct image for the Solo2.
-
master G
Moved the thread from forum Vu+ SOLO2 Support to forum VU+ SOLO 2.
VU+ SOLO 2 PVR Ready Linux Enigma2 Receiver Full HD 1080p
Download VUPlus Images and Enigma2 Team Support from Black Hole, OpenATV, OpenBH, Open Black Hole, OpenDroid, OpenESi, OpenHDF, OpenLD, OpenPLi, OpenSPA, OpenViX, Open Vision, PKT Hyperion, PurE2, SatDreamGR, VTi.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!