Help with updating entitlements

There are 2 replies in this Thread which was already clicked 871 times. The last Post () by visiondvd.

  • Hi Guys
    I need help, I have had entitlements run out and am now on a different card. I am afraid if this one does not update either.
    I have read and ,think I have followed directions for updating, but obviously doing somrthing wrong, any help is a great help.
    My setup is Oscam Version: 1.20-unstable_svn Rev. 7149
    My configs are

    Oscam server

    [reader]
    label = ***1
    description = ***1
    protocol = smartreader
    device = 001:006
    smargopatch = 1
    caid = 0963
    detect = cd
    mhz = 600
    cardmhz = 600
    ident = 0963:000000
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1
    saveemm-u = 1
    saveemm-s = 1
    lb_weight = 101

    Oscam User

    [account]
    user = a
    pwd = b
    description = Update Entitlements
    group = 1,2
    au = ***1
    caid = 0963
    cccignorereshare = 0
    keepalive = 1

    Oscam config

    [global]
    logfile = stdout
    nice = -1
    preferlocalcards = 1
    lb_mode = 1
    lb_max_ecmcount = 300
    lb_savepath =


    [monitor]
    hideclient_to = 15
    appendchaninfo = 0

    [newcamd]
    port = 13000@0963:000000
    key = 0102030405060708091011121314
    keepalive = 1

    [cccam]
    port = 13001
    reshare = 1
    forward_origin_card = 1
    version = 2.1.3
    stealth = 1
    nodeid = 5635695710E71476

    [webif]
    httpport = 8888
    httpuser = *****
    httppwd = *****
    httprefresh = 15
    httpallowed = 192.168.0.0-192.168.254.254

    Is this right?
    Also is there any way you can check if entitlement updates are working, before they actually run out?
    If I add bt sport to service, will entitlements show update right away? or if updating is not configured right, do I lose that update and have to ring bt again, or will it update by itself if my configs are rectified?
    Cheers

  • Try just using cccam to update your card with the correct box key , make sure you are clearing channels first so you know its correct , reading back you stated you were getting the new slybox with wifi , are you sure you havent been paired you have had nothing but issues trying to vupdate in the past , cccam will also do it for you if you clear chans get bt sport added as you mentioned it wont take any longer than 2 hours to show normally under 10 mins

  • I have had one card paired, and another entitlements run out, I have been having all sorts of issues, not really clued up in all this, but it works in-house and is saving some money.The card I have in now is not paired, hence I can clear all channels.
    Could you elaborate a bit more for me on "Try just using cccam to update your card with the correct box key", exactly how do I do this?
    about the bt sport, if I ring and get bt on card, I should see the update in oscam within 10 mins/two hours? Is that correct?
    So if I dont see the update, then I assume the enitilements will also not update, is this also correct?
    If this is the case, then I have set this up wrong.
    Can oscam alone update entitlements?
    Cheers

  • master G

    Set the Label from UK OSCam to Videoguard2 Cards OSCam

Your resource for OSCam softcam

Find configs, downloads, tutorials, and support for setting up and optimizing this open-source card server with wide protocol compatibility. Master the versatile OSCam softcam. Access support, configs, tutorials, and downloads for open-source card sharing and multi-protocol server management.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!