Need OSCAM + CCCAM config for JSC I***** please

i have a DM800 and an alien Amiko 2, with a jsc I***** card. I have checked the configs section but can only find viaccess config. Does anyone have a guide or the files ?

thanks guys i will check it out and get back.

update:

Ok, so the card is being seen, but showing no entitlements, I have checked the card in my admc box and is clearing. Any ideas ? Also, do I need to make a cccam.cfg to clear the card locally ?

from the log:

2013/09/27 21:24:47 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8844 (mipsel-unknown-linux-gnu)
2013/09/27 21:24:47 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1084
2013/09/27 21:24:47 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2013/09/27 21:24:47 0 s signal handling initialized
2013/09/27 21:24:47 0 s newcamd: initialized (fd=4, port=34000)
2013/09/27 21:24:47 0 s -> CAID: 0603 PROVID: 000000
2013/09/27 21:24:47 0 s JSC [internal] creating thread for device /dev/sci0
2013/09/27 21:24:47 51B918 h webif: decompressed 53538 bytes back into 153584 bytes
2013/09/27 21:24:47 51B918 h HTTP Server running. ip=0.0.0.0 port=8888
2013/09/27 21:24:47 519C28 r JSC [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2013/09/27 21:24:47 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/09/27 21:24:47 0 s waiting for local card init
2013/09/27 21:24:48 519C28 r JSC [internal] card detected
2013/09/27 21:24:51 519C28 r JSC [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30 9E
2013/09/27 21:24:51 519C28 r JSC [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2013/09/27 21:24:51 519C28 r JSC [internal] Calculated work ETU is 93.00 us
2013/09/27 21:24:51 519C28 r JSC [internal] ATR Fsmax is: 6 MHz, clocking card to 6.00
2013/09/27 21:24:52 519C28 r JSC [internal] detect i***** card
2013/09/27 21:24:52 519C28 r JSC [internal] I***** SC 60 version 1 revision 0, patch level 1
2013/09/27 21:24:52 519C28 r JSC [internal] caid: 0603, acs: 0.06, country code: QAT
2013/09/27 21:24:52 519C28 r JSC [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2013/09/27 21:24:55 519C28 r JSC [internal] active providers: 4 (0e96c6,000b00,000b00,01ff00)
2013/09/27 21:24:55 519C28 r JSC [internal] found card system i*****
2013/09/27 21:24:55 519C28 r JSC [i*****] entitlements for provider: 1, id: 0E96C6
2013/09/27 21:24:55 519C28 r JSC [i*****] chid: 014D, date: 2011/03/16 - 2011/03/19
2013/09/27 21:24:55 519C28 r JSC [i*****] chid: 000E, date: 2011/04/29 - 2011/12/18
2013/09/27 21:24:55 519C28 r JSC [i*****] chid: 7FFD, date: 2011/04/29 - 2011/05/09
2013/09/27 21:24:55 519C28 r JSC [i*****] chid: 7FFE, date: 2011/04/29 - 2011/05/29
2013/09/27 21:24:55 519C28 r JSC [i*****] chid: FFD8, date: 2011/04/29 - 2011/05/09
2013/09/27 21:25:02 519C28 r JSC [i*****] ready for requests
2013/09/27 21:25:03 0 s init for all local cards done
2013/09/27 21:25:03 0 s anti cascading disabled

Yeah did that, however card not clearing localy and still no entitlements on webif

bit more info,

DM800 clone, GP3, on 7w

OScam 1.20-unstable_svn, build r8844 (mipsel-unknown-linux-gnu)

I am checking from the webif
fc952f87bcf4b91f6bed9.jpg

Rami, do u haveyour cccam config if i cannot get this working ?

Weird thing is it shows that card expired, it is an old card, but was renewed back in Aug and clears in an admc and also a Ariva box

f552e.jpg

Yeah, in the Ariva it shows the correct entitlements, i'm starting to think about going down the cccam route and friend as reshare, if anyone has a cccam config

thanks for the link, going to try cccam 221, with newer ccams do u still need newcs to clear locally?

nevermind got it clearing using 221.

yeah I was showing my age with the newcs bit :D