Openpli 4 OE 2.0 e-star sim.

There are 8 replies in this Thread which was already clicked 9,906 times. The last Post () by salvatore.a.

    Download original image from openpli site and follow these instructions.


    1 - go by FTP to your box
    2 - open folder (lib / modules / extra /
    3 - copy all .*.ko files to your PC
    4 - Power off dreambox, hold the button and power on (keep holding)
    5 - Open the IP adres shown on the display
    6 - Flash the OpenPli image
    7 - Reboot the box
    8 - fixed ca error by flashing ssl84 (use DreamBox-OptiFlasher, choose option repair CA error and use simstar SSL 84)
    9 - FTP again to you box and put the drivers to the proper folder

    Input from another user :


    Replace point 7 and 8 to :


    7 - Do NOT reboot the box.
    8 - Flash e-star SSL 84 over webinterface ( New browserwindow ) now follow point 9.

    load the image ok but when I try to load the ssl84 it says it not compatable with the image
    Actual Words are ( Image for Wrong Architecture )
    estar 800se sim ver 3.0

    Edited once, last by s2tephen ().

    9 - FTP again to you box and put the drivers to the proper folder ???


    How can we FTP when dreambox is in flashmode , without reboot.
    And after reboot , the dreambox don't see the tuner.

    Have Yourself a E-Star box, and flashed others to 84 before


    Why not make it as the first and thus avoid CA Error?


    and therefore content to copy the drivers to finish


    How do I find out sim version in my box?

    Edited once, last by Searay ().

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login