card detect fail

Hello Ten Below
RE: card detect fail
Hope that you are well
Many thanks for your fast response to my private message regards the above. Yes the jsc sport card (Yellow card) is activated and valid to January 2012) . The jsc sport channels are clear in my technomate.

Unfortunayely I still receive the same error
i.e card detect fail after carrying out the modifications you kindly suggested as follows. I very much
appreciate your kind help to make the card is detectedn and the server is running.
I changed my cfg as instructed by you. This is my new cfg.
F: test test
SERVER LISTEN PORT : 12000
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
SERIAL READER: /dev/ttyS0
SERIAL READER: /dev/ttyS1
PHOENIX READER PATH: /dev/ttyS0
SMARTCARD CLOCK FREQUENCY: /dev/ttyS0 6000000
CAMKEY: /dev/ttyS0 00 00 00 00 00 00 00 00
CAMDATA: /dev/ttyS0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
PHOENIX READER PATH: /dev/ttyS1
SMARTCARD CLOCK FREQUENCY: /dev/ttyS1 6000000
CAMKEY: /dev/ttyS1 00 00 00 00 00 00 00 00
CAMDATA: /dev/ttyS1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Then I did a debug and the card detect fail message is still there.
zazolita@zazolita-desktop:/usr/local/bin$ ./CCcam.x86 -d
21:38:31.612 CCcam: ======================================================================
21:38:31.612 CCcam: starting CCcam 2.1.4 compiled on Jan 30 2010@17:00:48
21:38:31.612 CCcam: ======================================================================
21:38:31.612 CCcam: online using nodeId fbefb91fd4a803e2
21:38:31.613 CCcam: create 1 cam device(s)
21:38:31.764 CCcam: card detect fail
21:38:31.776 CCcam: added 785 keys from /var/keys/SoftCam.Key
21:38:31.777 CCcam: added 435 keys from /var/keys/AutoRoll.Key
21:38:31.777 CCcam: added 54 keys from /var/keys/constant.cw
21:38:31.778 CCcam: parsed 0 entries from /var/etc/CCcam.prio
21:38:31.781 CCcam: added 1274 provider names from /var/etc/CCcam.providers
21:38:31.781 CCcam: added 4 channel names from /var/etc/CCcam.channelinfo
21:38:31.781 CCcam: server started on port 12000
21:38:31.915 CCcam: card detect fail
This is what entitlements show:
card reader /dev/ttyS0
no or unknown card inserted
card reader /dev/ttyS1
no or unknown card inserted
These errors come up when I try to start the reader in nftytool:
zazolita@zazolita-desktop:~$ cd /var/nftytool
zazolita@zazolita-desktop:/var/nftytool$ ./nftytool -p phoenix -- -p phoenix -f 6.00 -e
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
zazolita@zazolita-desktop:/var/nftytool$
You wrote For internal sharing my C-line should be as follows:
C: servers local ip 12000 test test
Also please can you advice me how can I find out my server ip? Is it this one: http://127.0.0.1:16001
or is it the one that shows whenI go on whatismyip.com?

in ubuntu why does it show the reder as smart mouse even though I set the reader is a serial infinity in phoenix mode :
root@xxxx:/usr/local/nftytool-1.1# ./nftytool -p phoenix -- -s
Infinity USB 1.00
Status: disabled
Polarity: smartmouse
Frequency: none

I look forward on hearing from you.
Thank you so much for your kind efforts and cooperation.
best Regards,

Zazolita

Quote from newtolinux

seems is not recognising your usb device.

try downloading nftytool again & extracting to debian then do the following

apt-get install libusb-dev
apt-get install gcc
./configure
make

once you've completed the above succesfully then issue this from command

./nftytool -p phoenix -- -f 6.00 -p phoenix -e

try and report back

regards

t

Display More

Hello T.

I hope you are well. Thanks so much for your reply.

I did what you wrote, but I still get the same error message.

This is the message that comes up:
zazolita@zazolita-desktop:/var/nftytool$ ./nftytool -p phoenix -- -f 6.00 -p phoenix -e
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
Error in usb_interrupt_read()
�
Error in usb_interrupt_write()
Error in usb_interrupt_read()
Error in usb_interrupt_write()
zazolita@zazolita-desktop:/var/nftytool$ sudo ./nftytool -p phoenix -- -f 6.00 -p phoenix -e
Infinity USB 1.05
zazolita@zazolita-desktop:/var/nftytool$

In entitlements I can still see this:
card reader /dev/ttyS0
no or unknown card inserted

card reader /dev/ttyS1
no or unknown card inserted

What else could I do?

The card is an Al Jazeera Sport Viaccess 4 and it is valid until Jan 2012 and the channels are clear on the Technomate 500 super receiver.

Before inserting the card the lights are solid red and solid blue. After inserting the card the lights are as follows: one is solid red and the other one is flashing red-blue.

The card reader uses a serial cable and an usb power cable.

Thanks again for your help and look forward to hearing from you.

Regards, zazolita

Hello newtolinux

RE: Al jazeera viaccess 4 sport card - infinity pheonix reader- card detect failure

Hope that you are well.

Many thanks for your response regards the card detect fail error. I am very sory for the late reply to your suggestions to solve the problem as above. Unfortunayely, after carrying out the modifications you and under ten kindly suggested earlier (i.e on 14 and 18 of April also underten on 10 April) still receive the same error
i.e card detect fail.

. I very much appreciate any help to make the card is detected and the server is running.

Best Regards
zazolita

P.S

I have a Viaccess 4 - Al Jazeera Sport card, a Phoenix Infinity card reader and a Technomate TM-500 super receiver (patched with the latest ur-image published on 28-feb-11 running CCcam v2.1.4). The jsc sport card (Yellow card) is activated and valid to January 2012) . The jsc sport channels are clear in my technomate.

I am running Ubuntu 10.04TLS and CCcam 2.1.4 as done by this tutorial:
Automated Install Script for Ubuntu CCcam Server

I tried to install my Phoenix Infinity card reader as done in this tutorial:

Tutorial: How to install Infinity USB programmer on a Debian with CCcam