server problem

There are 7 replies in this Thread which was already clicked 1,461 times. The last Post () by musogeek.

    hi all


    I have been running my server on my raspberry pi with sly but was freezing a lot so I have changed my dns and port everything is ok my port is open my dns is up and running my card is up to date and found on my server but just wont clear channels I have changed port in my duo and its connected to server but channels wont clear any help would be great full.



    cheers


    woz



    :firework:

    • Official Post


    Post your configs buddy, you say you changed dns & port. How long has this been a problem?

    Hi ten



    Everything was working ok just sly freezing ect which has been going on for a bit so I kicked some peers of server ect to see if that helped, but they kept on trying to log on to me so thought I would do my server proper and only have peers with cards I won't ect so I only changed my port and dns which are ok and are open at first it worked for a minute then just stopped well weird.

    my files


    oscam.conf


    [global]
    logfile = /usr/local/etc/oscam.log
    cachedelay = 120
    nice = -1
    maxlogsize = 1024
    preferlocalcards = 1
    lb_mode = 1
    lb_max_ecmcount = 200
    failbantime = 60
    failbancount = 5


    [cccam]
    port = *********
    version = 2.2.1
    reshare = 1
    stealth = 1


    [webif]
    httpport = ********
    httprefresh = 5
    httpallowed = 127.0.0.1,192.168.0.0-255.255.255.255


    oscam.server


    [reader]
    label = ***
    protocol = pcsc
    device = 0
    caid = 0963
    detect = cd
    mhz = 500
    cardmhz = 500
    ident = 0963:000000
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    blockemm-g = 1
    lb_weight = 300



    these files was working before I havnt changed these.


    woz

    you said you changed the port - did you change this on the router and the server listen port for [cccam] part of oscam.conf so they are both the same? is the port in the router forwarded to the ip address of the server? If you changed your dyndns have you told your peers about the change? Remember they will have to change their details to log on to you, and also change any IP locks they have so you can log on to them.

    If I take a while to respond, you can see why.....


    :red:

    Just had a quick look and seems it is connecting fine - but the card is only clearing certain channels, and with other virtual cards off, there is no fallback, so I think we have found the issue and what probably caused the glitching before - entitlements uptodate and getting channel not subscribed message points to the card being paired...
    http://linuxsat-support.com/showthread.php?t=37081

    If I take a while to respond, you can see why.....


    :red:

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login