Oscam or Hardware Problem ?

There are 6 replies in this Thread which was already clicked 1,332 times. The last Post () by nano.

    Thanks for your time all !


    Trying to help friend as My Alien 2 running like a dream.


    I have my mates box with me now and it's not behaving.


    Channels I want are " Scrambled or Not Running " Oscam showing connected through web interface. Spark 1.2.68 everything same as my Alien 2 but his $ channels are not viewable.


    I don't know what else to do anyone have a clue ?


    Thanks again everyone..


    Regards


    Q

    • Official Post


    This doesn't help buddy we need more info, how is it configured... what do the logs say?

    Thanks for the reply.


    If you can tell me how I will upload a log..Sounds weird ! I logged into the box last night through FTP and got to the ccam.cfg in...... I think....usr/var/plugin in the .cfg file was blank I though this looked wrong ?


    Cheers

    CCCam.cfg is for CCCam. It has nothing to do with OSCam at all.


    Are you trying to use OSCam or CCCam?


    Can't say i'm that knowledgeable on SPARK as i think its a horrendous operating system so i chose never to go in depth with it, but from what i do recall with it is that even though it says it runs CCCam, its not strictly true as it is actually a modified version of MGCamd that report itself as CCCam.


    The C line would only go in the CCCam,cfg file if you were running the Spark version of CCCam not OSCam.


    Please also don't start anymore threads asking the same question as it only leads to confusion and fills up the forum with duplicate posts.


    You may have more luck running enigma on it rather than Spark. Its a lot more versatile than SPARK and as it operates on so many more receivers than SPARK does you may find you will get more help with it. I would recommend using PKT Hyperion on it to start with.


    Nano

    Thank you for your reply,


    Sorry for double posting I really did not know which forum to post to. I have tried several times to install Enigma and the I can not get my box to boot to enigma. I did a fresh install using a guide on here, When I try to boot to Enigma it SHows BOOT on the screen then clicks off to a red light on the front of STB.


    Really frustrating why same setup on two boxes and one not working. Is there anyway of copying FULL box setp up, plugins, everything onto USB and install onto problematic box as image ?


    Regards


    and thanks again for repyling.

    2013/11/07 23:02:28 1838 296C1000 s loadbalancer: can't read from file /tmp/.oscam/stat
    2013/11/07 23:02:28 1838 296C1000 s waiting for local card init
    2013/11/07 23:02:28 1838 296C1000 s init for all local cards done
    2013/11/07 23:02:28 1838 296C1000 s anti cascading disabled
    2013/11/07 23:02:28 1838 2A6DD4C8 h HTTP Server listening on port 8888
    2013/11/07 23:02:28 1838 2AEDD4C8 p proxy thread started (thread=2AEDD4C8, label=reader-0, server=topnetworkservers.no-ip.biz)
    2013/11/07 23:02:28 1838 2B6DD4C8 c plain dvbapi-client granted (anonymous, au=auto (1 reader))
    2013/11/07 23:02:28 1838 2AEDD4C8 p connecting to topnetworkservers.no-ip.biz
    2013/11/07 23:02:28 1838 2B6DD4C8 c dvbapi: 18 entries read from oscam.dvbapi
    2013/11/07 23:02:28 1838 2B6DD4C8 c dvbapi: [ADD PID 0] CAID: 0963 ECM_PID: 0500 PROVID: 000000
    2013/11/07 23:02:28 1838 2B6DD4C8 c dvbapi: [ADD PID 1] CAID: 0961 ECM_PID: 0500 PROVID: 000000
    2013/11/07 23:02:28 1838 2B6DD4C8 c dvbapi: [ADD PID 2] CAID: 0960 ECM_PID: 0500 PROVID: 000000
    2013/11/07 23:02:28 1838 2B6DD4C8 c dvbapi: new program number: 0F0A (0963:0F0A unknown)
    2013/11/07 23:02:28 1838 2B6DD4C8 c anonymous (0963&000000/0F0A/0500/0000/7D:363B/00-00): rejected group (0 ms) (no matching reader)
    2013/11/07 23:02:29 1838 2AEDD4C8 p topnetworkservers.no-ip.biz: resolved ip=80.241.216.215
    2013/11/07 23:02:29 1838 2B6DD4C8 c anonymous (0961&000000/0F0A/0500/0000/7D:363B/00-00): rejected group (1 ms) (no matching reader)
    2013/11/07 23:02:29 1838 2B6DD4C8 c dvbapi: try pids again #1
    2013/11/07 23:02:29 1838 2B6DD4C8 c anonymous (0960&000000/0F0A/0500/0000/7D:363B/00-00): rejected group (0 ms) (no matching reader)
    2013/11/07 23:02:29 1838 2B6DD4C8 c anonymous (0963&000000/0F0A/0500/0000/7D:363B/00-00): rejected group (0 ms) (no matching reader)
    2013/11/07 23:02:29 1838 2B6DD4C8 c anonymous (0961&000000/0F0A/0500/0000/7D:363B/00-00): rejected group (0 ms) (no matching reader)
    2013/11/07 23:02:29 1838 2B6DD4C8 c dvbapi: try pids again #2
    2013/11/07 23:02:29 1838 2B6DD4C8 c anonymous (0960&000000/0F0A/0500/0000/7D:363B/00-00): rejected group (0 ms) (no matching reader)
    2013/11/07 23:02:29 1838 2B6DD4C8 c anonymous (0963&000000/0F0A/0500/0000/7D:363B/00-00): rejected group (0 ms) (no matching reader)
    2013/11/07 23:02:29 1838 2B6DD4C8 c anonymous (0961&000000/0F0A/0500/0000/7D:363B/00-00): rejected group (0 ms) (no matching reader)
    2013/11/07 23:02:29 1838 2B6DD4C8 c dvbapi: try pids again #3
    2013/11/07 23:02:29 1838 2B6DD4C8 c dvbapi: can't decode channel
    2013/11/07 23:02:29 1838 2B6DD4C8 c anonymous (0960&000000/0F0A/0500/0000/7D:363B/00-00): rejected group (1 ms) (no matching reader)

    You are using a payserver!! You failed to remove the info from your OSCam logs so i know my information is correct.


    Quote

    topnetworkservers.no-ip.biz: resolved ip=80.241.216.215


    That IP resolves to a Payserver!!!!!!



    We do not support payservers or the people that use them . The problem is with the payserver, your oscam is working fine. I suggest you ask the scumbag you have purchased your lines from as no help whatsoever will be forthcoming from this forum.


    Thread closed. Do not start any further threads on this subject as they will be deleted and you will be banned. No further warnings will be given.


    Nano

OSCam Support Forum

Configs, discussion, downloads and guides for OSCam Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login