Here is what I get
Code
2013/11/19 22:44:44 0 s waiting for local card init
2013/11/19 22:44:44 1010D650 h webif: decompressed 70083 bytes back into 176472 bytes
2013/11/19 22:44:44 1010B758 r N3 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=368)
2013/11/19 22:44:44 1010D650 h HTTP Server running. ip=0.0.0.0 port=8888
2013/11/19 22:44:45 1010B758 r N3 [internal] card detected
2013/11/19 22:44:46 1010B758 r N3 [internal] ATR: ## real atr removed ##
2013/11/19 22:44:46 1010B758 r N3 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/11/19 22:44:46 1010B758 r N3 [internal] Calculated work ETU is 6.40 us
2013/11/19 22:44:46 1010B758 r N3 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/11/19 22:44:48 1010B758 r N3 [internal] Warning: Card returned error on setting ifsd value to 251
2013/11/19 22:44:49 1010B758 r N3 [internal] detect nagra 3 NA card
2013/11/19 22:44:50 1010B758 r N3 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/11/19 22:44:52 1010B758 r N3 [internal] T1 Resync command error, trying to reactivate!
2013/11/19 22:44:53 1010B758 r N3 [internal] ATR: ## real atr removed ##
2013/11/19 22:44:53 1010B758 r N3 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/11/19 22:44:53 1010B758 r N3 [internal] Calculated work ETU is 6.40 us
2013/11/19 22:44:53 1010B758 r N3 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/11/19 22:44:54 1010B758 r N3 [internal] Warning: Card returned error on setting ifsd value to 251
2013/11/19 22:44:56 1010B758 r N3 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/11/19 22:44:57 1010B758 r N3 [internal] T1 Resync command error, trying to reactivate!
2013/11/19 22:44:58 1010B758 r N3 [internal] ATR: ## real atr removed ##
2013/11/19 22:44:58 1010B758 r N3 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/11/19 22:44:58 1010B758 r N3 [internal] Calculated work ETU is 6.40 us
2013/11/19 22:44:58 1010B758 r N3 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/11/19 22:45:00 1010B758 r N3 [internal] Warning: Card returned error on setting ifsd value to 251
2013/11/19 22:45:00 1010B758 r N3 [internal] card system not supported
2013/11/19 22:45:00 1010B758 r N3 [internal] Normal mode failed, reverting to Deprecated Mode
2013/11/19 22:45:01 1010B758 r N3 [internal] ATR: ## real atr removed ##
2013/11/19 22:45:01 1010B758 r N3 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/11/19 22:45:01 1010B758 r N3 [internal] Calculated work ETU is 74.40 us
2013/11/19 22:45:01 1010B758 r N3 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2013/11/19 22:45:02 1010B758 r N3 [internal] Warning: Card returned error on setting ifsd value to 251
2013/11/19 22:45:03 1010B758 r N3 [internal] detect nagra 3 NA card
2013/11/19 22:45:04 1010B758 r N3 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/11/19 22:45:05 1010B758 r N3 [internal] T1 Resync command error, trying to reactivate!
2013/11/19 22:45:06 1010B758 r N3 [internal] ATR: ## real atr removed ##
2013/11/19 22:45:06 1010B758 r N3 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/11/19 22:45:06 1010B758 r N3 [internal] Calculated work ETU is 6.40 us
2013/11/19 22:45:06 1010B758 r N3 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
Here is my reader config
[reader]
label = N3
description = N3
protocol = internal
device = /dev/sci0
caid = 1816
boxkey = mybkkey
rsakey = myrsakey
detect = cd
ident = 18xx:000000
mhz = 500
cardmhz = 368I tried with mhz=368 and cardmhz=368 and still no go. I googled and seems like this might be a problem with dm500 /dev/sci0 readers.
Any ideas?
