Hello All - Please Help With New Server Build

There are 25 replies in this Thread which was already clicked 2,650 times. The last Post () by hulk5010.

    Thanks Master G,


    I swapped file you sent and put my user in but it did look ok before hand as i changed username in CCam.cfg at the moment it is still doing the same as if the ccam user in not there but it is in the config.


    ___________________________________________________________________


    SERVER LISTEN PORT : 12000
    ALLOW TELNETINFO: yes
    ALLOW WEBINFO: yes
    WEBINFO USERNAME :admin
    WEBINFO PASSWORD :admin
    TELNETINFO USERNAME :admin
    TELNETINFO PASSWORD :admin
    TELNETINFO LISTEN PORT : 16000
    WEBINFO LISTEN PORT : 16001
    ZAP OSD TIME :0
    OSD USERNAME :root
    OSD PASSWORD :dreambox
    OSD PORT :80
    SHOW TIMING : yes
    DEBUG : yes
    NEWCAMD CONF : no
    #DISABLE EMM : yes
    #EXTRA EMM LEVEL : yes
    SHOW EXTENEDED CLIENT INFO : yes
    MINI OSD : no
    #MINIMUM DOWNHOPS: 1
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    CAID PRIO FILE : /var/etc/CCcam.prio
    LOG WARNINGS : /var/log/warnings.txt
    SOFTKEY FILE : /var/keys/SoftCam.Key
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    #STATIC CW FILE : /var/keys/constant.cw
    #BOXKEY: /dev/sci0
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000


    N: 127.0.0.1 10001 ccam ccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256


    ______________________________________________________________________


    Oscam.user


    # oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8917
    # Read more: http://www.streamboard.tv/svn/…on/doc/txt/oscam.user.txt


    account]
    user = ccam
    pwd = ccam
    group = 1
    au = uk
    caid = 0963
    keepalive = 1

    Server is saying its connected But Box Is just Saying Offline



    Almost There But Something not right

    • Official Post
    Quote from hulk5010

    do I give these settings to my box ?


    N: 127.0.0.1 10xxx ccam ccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 Which are the same as whats in ccam.cfg?


    No, the N line connects oscam to CCcam.. This N line must be on the server`s CCcam.cfg only..


    To setup a connection for your receivers create an F line in the server`s CCcam.cfg then add a c line to each receiver`s CCcam.cfg..


    Example on server`s CCcam.cfg;


    Code
    N: 127.0.0.1 10xxx ccam ccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: [COLOR='#FF0000']receiver password [/COLOR]
F: [COLOR='#00FF00']receiver1 password1[/COLOR]
F: [COLOR='#FFA500']receiver2 password2[/COLOR]


    You now have three C lines to use in each of your receivers;


    Code
    C: server.ip.address 12000 [COLOR='#FF0000']receiver password[/COLOR]
C: server.ip.address 12000 [COLOR='#00FF00']receiver1 password1[/COLOR]
C: server.ip.address 12000 [COLOR='#FFA500']receiver2 password2[/COLOR]

Your resource for Linux TV servers and smart card readers.

Find software downloads, drivers, and support for server setup and card-sharing configurations. Set up a Linux-based TV server. Access downloads and support for server software and USB card readers for advanced TV reception and management

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login