Fixed dish and motorised setup using diseqc switch need help

There are 3 replies in this Thread which was already clicked 3,106 times. The last Post () by master G.

    Is it possible to have a motorised dish and a fixed dish connected to the Dreambox 800 HD I had a 2 way diseqc switch: with port A having a fixed dish on 28.2e, and port B a motorised (TECHNOMATE TM 2600 ALL METAL DRIVE MOTOR) dish which i Can use for 23E.19e16e,13e.9E.7E 4.8E 0.8w only.
    Please Help me
    Thanks

    Yup that should work not a problem mate as far as I know! :top:


    Correct me if i'm wrong lads, you just need to have the motor set up first with the positons stored (or use usals!) and then you can add the switch!

    • Official Post
    Quote from Desitv

    Is it possible to have a motorised dish and a fixed dish connected to the Dreambox 800 HD I had a 2 way diseqc switch: with port A having a fixed dish on 28.2e, and port B a motorised (TECHNOMATE TM 2600 ALL METAL DRIVE MOTOR) dish which i Can use for 23E.19e16e,13e.9E.7E 4.8E 0.8w only.
    Please Help me
    Thanks



    Yes this works fine mate, even 2 seperate motors is possible.Guide to setting switches here.


    How to set up DiSEqC Switches

Your resource for Enigma2 tuner configuration

Find tutorials and support for setting up DVB, advanced FBC, and USB tuners for satellite, cable, and other signal sources. Master your receiver's tuning capabilities. Find dedicated support and guides to configure DVB, FBC, and USB tuners for optimal satellite, cable, and digital TV reception.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login